Hydrogel-mediated direct patterning of conducting polymer films with multiple surface chemistries.
Ontology highlight
ABSTRACT:
SUBMITTER: Park S
PROVIDER: S-EPMC5805559 | biostudies-literature | 2014 May
REPOSITORIES: biostudies-literature
Publications
Hydrogel-mediated direct patterning of conducting polymer films with multiple surface chemistries.
Park SooHyun S Yang Guang G Madduri Nrutya N Abidian Mohammad Reza MR Majd Sheereen S
Advanced materials (Deerfield Beach, Fla.) 20140313 18
A new methodology for selective electropolymerization of conducting polymer films using wet hydrogel stamps is presented. The ability of this simple method to generate patterned films of conducting polymers with multiple surface chemistries in a one-step process and to incorporate fragile biomolecules in these films is demonstrated. ...[more]
Similar Datasets
Project description:We applied 2-photon laser ablation to write subdiffraction nanoscale chemical patterns into ultrathin polymer films under ambient conditions. Poly(ethylene glycol) methacrylate brush layers were prepared on quartz substrates via surface-initiated atom-transfer radical polymerization and ablated to expose the underlying substrate using the nonlinear 2-photon absorbance of a frequency-doubled Ti:sapphire femtosecond laser. Single-shot ablation thresholds of polymer films were ~1.5 times smaller than that of a quartz substrate, which allowed patterning of nanoscale features without damage to the underlying substrate. At a 1/e(2) laser spot diameter of 0.86 ?m, the features of exposed substrate approached ~80 nm, well below the diffraction limit for 400 nm light. Ablated features were chemically distinct and amenable to chemical modification.
| S-EPMC3086137 | biostudies-literature
Project description:High-fidelity surface functional group (e.g., N-hydroxysuccinimide (NHS) reactive ester) patterning is readily and reliably achieved on commercial poly(ethylene glycol) (PEG)-based polymer films already known to exhibit high performance non-fouling properties in full serum and in cell culture conditions. NHS coupling chemistry co-patterned with methoxy-capped PEG using photolithographic methods is directly spatially imaged using imaging time-of-flight secondary ion mass spectrometry (ToF-SIMS) and principal components statistical analysis. Patterned NHS surface reactive zones are clearly resolved at high sensitivity despite the complexity of the polymer matrix chemistry. ToF-SIMS imaging also reveals the presence of photo-resist residue remaining from typical photolithography processing methods. High cross-correlation between various ion-derived ToF-SIMS images is observed, providing sensitive chemical corroboration of pattern chemistry and biological reactivity in complex milieu. Surface-specific protein coupling is observed first by site-selective reaction of streptavidin with NHS patterns, followed by identical patterns of biotinylated Alexa-labeled albumin coupling. This suggests that streptavidin immobilized on the patterns remains bioactive. Fluorescently labeled full serum is shown to react selectively with NHS-reactive regions, with minimal signal from methoxy-capped regions. Insufficient serum is adsorbed under any conditions to these surfaces to support cell attachment in serum-containing media. This reflects the high intrinsic non-adsorptive nature of this chemistry. Fibroblasts attach and proliferate in serum culture only when a cell adhesion peptide (RGD) is first grafted to NHS regions on the PEG-based surfaces. Longer-term serum-based cell culture retains high cell-pattern fidelity that correlates with chemical imaging of both the NHS and RGD patterns and also lack of cell adhesion to methoxy-capped regions. Cell staining shows orientation of adherent cells within the narrow patterned areas. Cell patterns are consistently retained beyond 15 days in serum media.
| S-EPMC2917816 | biostudies-literature
Project description:Conducting polymer hydrogels represent a unique class of materials that synergizes the advantageous features of hydrogels and organic conductors and have been used in many applications such as bioelectronics and energy storage devices. They are often synthesized by polymerizing conductive polymer monomer within a nonconducting hydrogel matrix, resulting in deterioration of their electrical properties. Here, we report a scalable and versatile synthesis of multifunctional polyaniline (PAni) hydrogel with excellent electronic conductivity and electrochemical properties. With high surface area and three-dimensional porous nanostructures, the PAni hydrogels demonstrated potential as high-performance supercapacitor electrodes with high specific capacitance (~480 F·g(-1)), unprecedented rate capability, and cycling stability (~83% capacitance retention after 10,000 cycles). The PAni hydrogels can also function as the active component of glucose oxidase sensors with fast response time (~0.3 s) and superior sensitivity (~16.7 ?A · mM(-1)). The scalable synthesis and excellent electrode performance of the PAni hydrogel make it an attractive candidate for bioelectronics and future-generation energy storage electrodes.
| S-EPMC3386113 | biostudies-literature
Project description:Large-scale structural color flexible coatings have been hard to create, and patterning color on them is key to many applications, including large-area strain sensors, wall-size displays, security devices, and smart fabrics. To achieve controlled tuning, a micro-imprinting technique is applied here to pattern both the surface morphology and the structural color of the polymer opal films (POFs). These POFs are made of 3D ordered arrays of hard spherical particles embedded inside soft shells. The soft outer shells cause the POFs to deform upon imprinting with a pre-patterned stamp, driving a flow of the soft polymer and a rearrangement of the hard spheres within the films. As a result, a patterned surface morphology is generated within the POFs and the structural colors are selectively modified within different regions. These changes are dependent on the pressure, temperature, and duration of imprinting, as well as the feature sizes in the stamps. Moreover, the pattern geometry and structural colors can then be further tuned by stretching. Micropattern color generation upon imprinting depends on control of colloidal transport in a polymer matrix under shear flow and brings many potential properties including stretchability and tunability, as well as being of fundamental interest.
| S-EPMC4497474 | biostudies-literature
Project description:To demonstrate the design, fabrication and testing of conformable conducting biomaterials that encourage cell alignment.Thin conducting composite biomaterials based on multilayer films of poly(3.4-ethylenedioxythiophene) derivatives, chitosan and gelatin were prepared in a layer-by-layer fashion. Fibroblasts were observed with fluorescence microscopy and their alignment (relative to the dipping direction and direction of electrical current passed through the films) was determined using ImageJ.Fibroblasts adhered to and proliferated on the films. Fibroblasts aligned with the dipping direction used during film preparation and this was enhanced by a DC current.We report the preparation of conducting polymer-based films that enhance the alignment of fibroblasts on their surface which is an important feature of a variety of tissues.
| S-EPMC5137882 | biostudies-other
Project description:Patterning of colloidal particles with chemically or topographically distinct surface domains (patches) has attracted intense research interest. Surface-patterned particles act as colloidal analogues of atoms and molecules, serve as model systems in studies of phase transitions in liquid systems, behave as 'colloidal surfactants' and function as templates for the synthesis of hybrid particles. The generation of micrometre- and submicrometre-sized patchy colloids is now efficient, but surface patterning of inorganic colloidal nanoparticles with dimensions of the order of tens of nanometres is uncommon. Such nanoparticles exhibit size- and shape-dependent optical, electronic and magnetic properties, and their assemblies show new collective properties. At present, nanoparticle patterning is limited to the generation of two-patch nanoparticles, and nanoparticles with surface ripples or a 'raspberry' surface morphology. Here we demonstrate nanoparticle surface patterning, which utilizes thermodynamically driven segregation of polymer ligands from a uniform polymer brush into surface-pinned micelles following a change in solvent quality. Patch formation is reversible but can be permanently preserved using a photocrosslinking step. The methodology offers the ability to control the dimensions of patches, their spatial distribution and the number of patches per nanoparticle, in agreement with a theoretical model. The versatility of the strategy is demonstrated by patterning nanoparticles with different dimensions, shapes and compositions, tethered with various types of polymers and subjected to different external stimuli. These patchy nanocolloids have potential applications in fundamental research, the self-assembly of nanomaterials, diagnostics, sensing and colloidal stabilization.
| S-EPMC5161688 | biostudies-literature
Project description:Central nervous system (CNS) injuries and neurodegenerative diseases have markedly poor prognoses and can result in permanent dysfunction due to the general inability of CNS neurons to regenerate. Differentiation of transplanted stem cells has emerged as a therapeutic avenue to regenerate tissue architecture in damaged areas. Electrical stimulation is a promising approach for directing the differentiation outcomes and pattern of outgrowth of transplanted stem cells, however traditional inorganic bio-electrodes can induce adverse effects such as inflammation. Here, we demonstrate the implementation of two organic thin films, a polymer/reduced graphene oxide nanocomposite (P(rGO)) and PEDOT:PSS, that have favorable properties for implementation as conductive materials for electrical stimulation, as well as an inorganic indium tin oxide (ITO) conductive film. Transcriptomic analysis revealed that electrical stimulation improved neuronal differentiation of SH-SY5Y cells on all three films, with the greatest effect for P(rGO). Unique material- and electrical stimuli-mediated effects were observed, associated with differentiation, cell-substrate adhesion, and translation. Our work demonstrates that P(rGO) and PEDOT:PSS are highly promising organic materials for the development of biocompatible, conductive scaffolds that will enhance electrically-aided stem cell therapeutics for CNS injuries and neurodegenerative diseases.
2024-09-05 | GSE261580 | GEO
Project description:Patterned conducting polymer films with unique structures have promising prospects for application in various fields, such as actuation, water purification, sensing, and bioelectronics. However, their practical application is hindered because of the limitations of existing construction methods. Herein, a strategy is proposed for the superhydrophobic-substrate-assisted construction of free-standing 3D microcavity-patterned conducting polymer films (McPCPFs) at micrometer resolution. Easy-peeling and nondestructive transfer properties are achieved through electrochemical polymerization along the solid/liquid/gas triphase interface on micropillar-structured substrates. The effects of the wettability and geometrical parameters of the substrates on the construction of McPCPFs are systematically investigated in addition to the evolution of the epitaxial growth along the triphase interface at different polymerization times. The McPCPFs can be easily peeled from superhydrophobic surfaces using ethanol because of weak adhesion and nondestructively transferred to various substrates taking advantage of the capillarity. Furthermore, sensitive light-driven McPCPF locomotion on organic liquid surfaces is demonstrated. Ultimately, a facile strategy for the construction of free-standing 3D microstructure-patterned conducting polymer films is proposed, which can improve productivity and applicability of the films in different fields and expand the application scope of superwettable interfaces.
| S-EPMC8425917 | biostudies-literature
Project description:Conjugated microporous polymers are a unique class of polymers that combine extended π-conjugation with inherent porosity. However, these polymers are synthesized through solution-phase reactions to yield insoluble and unprocessable solids, which preclude not only the evaluation of their conducting properties but also the fabrication of thin films for device implementation. Here, we report a strategy for the synthesis of thin films of π-conjugated microporous polymers by designing thiophene-based electropolymerization at the solution-electrode interface. High-quality films are prepared on a large area of various electrodes, the film thickness is controllable, and the films are used for device fabrication. These films are outstanding hole conductors and, upon incorporation of fullerenes into the pores, function as highly efficient photoactive layers for energy conversions. Our film strategy may boost the applications in photocatalysis, energy storage, and optoelectronics.
| S-EPMC4678513 | biostudies-literature
Project description:The surface relaxation dynamics of supported star-shaped polymer thin films are shown to be slower than the bulk, persisting up to temperatures at least 50 K above the bulk glass transition temperature T_{g}^{bulk}. This behavior, exhibited by star-shaped polystyrenes with functionality f=8 arms and molecular weights per arm M_{arm}<M_{e} (M_{e} is the entanglement molecular weight), is shown by molecular dynamics simulations to be associated with a preferential localization of these macromolecules at the free surface. This new phenomenon is in notable contrast to that of linear-chain polymer thin film systems, where the surface relaxations are enhanced in relation to the bulk; this enhancement persists only for a limited temperature range above the bulk T_{g}^{bulk}. Evidence of the slow surface dynamics, compared to the bulk, for temperatures well above T_{g} and at length and time scales not associated with the glass transition has not previously been reported for polymers.
| S-EPMC5839106 | biostudies-literature