Dataset Information

Silicon Micropore-Based Parallel Plate Membrane Oxygenator.

ABSTRACT: Extracorporeal membrane oxygenation (ECMO) is a life support system that circulates the blood through an oxygenating system to temporarily (days to months) support heart or lung function during cardiopulmonary failure until organ recovery or replacement. Currently, the need for high levels of systemic anticoagulation and the risk for bleeding are main drawbacks of ECMO that can be addressed with a redesigned ECMO system. Our lab has developed an approach using microelectromechanical systems (MEMS) fabrication techniques to create novel gas exchange membranes consisting of a rigid silicon micropore membrane (S?M) support structure bonded to a thin film of gas-permeable polydimethylsiloxane (PDMS). This study details the fabrication process to create silicon membranes with highly uniform micropores that have a high level of pattern fidelity. The oxygen transport across these membranes was tested in a simple water-based bench-top set-up as well in a porcine in vivo model. It was determined that the mass transfer coefficient for the system using SµM-PDMS membranes was 3.03?±?0.42 mL O2 min-1 m-2 cm Hg-1 with pure water and 1.71?±?1.03 mL O2 min-1 m-2 cm Hg-1 with blood. An analytic model to predict gas transport was developed using data from the bench-top experiments and validated with in vivo testing. This was a proof of concept study showing adequate oxygen transport across a parallel plate SµM-PDMS membrane when used as a membrane oxygenator. This work establishes the tools and the equipoise to develop future generations of silicon micropore membrane oxygenators.

SUBMITTER: Dharia A

PROVIDER: S-EPMC5808906 | biostudies-literature | 2018 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Silicon Micropore-Based Parallel Plate Membrane Oxygenator.

Dharia Ajay A Abada Emily E Feinberg Benjamin B Yeager Torin T Moses Willieford W Park Jaehyun J Blaha Charles C Wright Nathan N Padilla Benjamin B Roy Shuvo S

Artificial organs 20170811 2

Extracorporeal membrane oxygenation (ECMO) is a life support system that circulates the blood through an oxygenating system to temporarily (days to months) support heart or lung function during cardiopulmonary failure until organ recovery or replacement. Currently, the need for high levels of systemic anticoagulation and the risk for bleeding are main drawbacks of ECMO that can be addressed with a redesigned ECMO system. Our lab has developed an approach using microelectromechanical systems (MEM ...[more]

PMID: 28800389

Similar Datasets

Project description:Despite the formation of biofilms on catheters for extracorporeal membrane oxygenation (ECMO), some patients do not show bacteremia. To elucidate the specific linkage between biofilms and bacteremia in patients with ECMO, an improved understanding of the microbial community within catheter biofilms is necessary. Hence, we aimed to evaluate the biofilm microbiome of ECMO catheters from adults with (n = 6) and without (n = 15) bacteremia. The microbiomes of the catheter biofilms were evaluated by profiling the V3 and V4 regions of bacterial 16s rRNA genes using the Illumina MiSeq sequencing platform. In total, 2,548,172 reads, with an average of 121,341 reads per sample, were generated. Although alpha diversity was slightly higher in the non-bacteremic group, the difference was not statistically significant. In addition, there was no difference in beta diversity between the two groups. We found 367 different genera, of which 8 were present in all samples regardless of group; Limnohabitans, Flavobacterium, Delftia, Massilia, Bacillus, Candidatus, Xiphinematobacter, and CL0-1 showed an abundance of more than 1% in the sample. In particular, Arthrobacter, SMB53, Neisseria, Ortrobactrum, Candidatus Rhabdochlamydia, Deefgae, Dyella, Paracoccus, and Pedobacter were highly abundant in the bacteremic group. Network analysis indicated that the microbiome of the bacteremic group was more complex than that of the non-bacteremic group. Flavobacterium and CL0.1, which were abundant in the bacteremic group, were considered important genera because they connected different subnetworks. Biofilm characteristics in ECMO catheters varied according to the presence or absence of bacteremia. There were no significant differences in diversity between the two groups, but there were significant differences in the community composition of the biofilms. The biofilm-associated community was dynamic, with the bacteremic group showing very complex network connections within the microbiome.

Project description:The main objective of this study is to demonstrate the performance characteristics of the Magic Plate (MP) system when operated upstream of the patient in trans-mission mode (MPTM). The MPTM is an essential component of a real-time QA system designed for operation during radiotherapy treatment. Of particular interest is a quantitative study into the influence of the MP on the radiation beam quality at several field sizes and linear accelerator potential differences. The impact is measured through beam perturbation effects such as changes in the skin dose and/or percentage depth dose (PDD) (both in and out of field). The MP was placed in the block tray of a Varian linac head operated at 6, 10 and 18 MV beam energy. To optimize the MPTM operational setup, two conditions were investigated and each setup was compared to the case where no MP is positioned in place (i.e., open field): (i) MPTM alone and (ii) MPTM with a thin passive contamination electron filter. The in-field and out-of-field surface doses of a solid water phantom were investigated for both setups using a Markus plane parallel (Model N23343) and Attix parallel-plate, MRI model 449 ionization chambers. In addition, the effect on the 2D dose distribution measured by the Delta4 QA system was also investi-gated. The transmission factor for both of these MPTM setups in the central axis was also investigated using a Farmer ionization chamber (Model 2571A) and an Attix ionization chamber. Measurements were performed for different irradiation field sizes of 5 × 5 cm2 and 10 × 10 cm2. The change in the surface dose relative to dmax was measured to be less than 0.5% for the 6 MV, 10 MV, and 18 MV energy beams. Transmission factors measured for both set ups (i & ii above) with 6 MV, 10 MV, and 18 MV at a depth of dmax and a depth of 10 cm were all within 1.6% of open field. The impact of both the bare MPTM and the MPTM with 1 mm buildup on 3D dose distribution in comparison to the open field investigated using the Delta4 system and both the MPTM versions passed standard clinical gamma analysis criteria. Two MPTM operational setups were studied and presented in this article. The results indicate that both versions may be suitable for the new real-time megavoltage photon treatment delivery QA system under development. However, the bare MPTM appears to be slightly better suited of the two MP versions, as it minimally perturbs the radiation field and does not lead to any significant increase in skin dose to the patient.

Dataset Information

Silicon Micropore-Based Parallel Plate Membrane Oxygenator.

Publications

Silicon Micropore-Based Parallel Plate Membrane Oxygenator.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets