Browse
Submit Data
Databases
API
Help

Dataset Information

3 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A One-Structure-Based Multieffects Coupled Nanogenerator for Simultaneously Scavenging Thermal, Solar, and Mechanical Energies.

ABSTRACT: Rapid advances in various energy harvesters impose the challenge on integrating them into one device structure with synergetic effects for full use of the available energies from the environment. Here, a multieffect coupled nanogenerator based on ferroelectric barium titanate is reported. It promotes the ability to simultaneously scavenging thermal, solar, and mechanical energies. By integration of a pyroelectric nanogenerator, a photovoltaic cell, and a triboelectric-piezoelectric nanogenerator in one structure with only two electrodes, multieffects interact with each other to alter the electric output, and a complementary power source with peak current of ≈1.5 µA, peak voltage of ≈7 V, and platform voltage of ≈6 V is successfully achieved. Compared with traditional hybridized nanogenerators with stacked architectures, the one-structure-based multieffects coupled nanogenerator is smaller, simpler, and less costly, showing prospective in practical applications and represents a new trend of all-in-one multiple energy scavenging.

SUBMITTER: Ji Y

PROVIDER: S-EPMC5826984 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Coupling Enhancement of a Flexible BiFeO<sub>3</sub> Film-Based Nanogenerator for Simultaneously Scavenging Light and Vibration Energies.

Project description:Coupled nanogenerators have been a research hotspot due to their ability to harvest a variety of forms of energy such as light, mechanical and thermal energy and achieve a stable direct current output. Ferroelectric films are frequently investigated for photovoltaic applications due to their unique photovoltaic properties and bandgap-independent photovoltage, while the flexoelectric effect is an electromechanical property commonly found in solid dielectrics. Here, we effectively construct a new form of coupled nanogenerator based on a flexible BiFeO3 ferroelectric film that combines both flexoelectric and photovoltaic effects to successfully harvest both light and vibration energies. This device converts an alternating current into a direct current and achieves a 6.2% charge enhancement and a 19.3% energy enhancement to achieve a multi-dimensional "1 + 1 > 2" coupling enhancement in terms of current, charge and energy. This work proposes a new approach to the coupling of multiple energy harvesting mechanisms in ferroelectric nanogenerators and provides a new strategy to enhance the transduction efficiency of flexible functional devices.

| S-EPMC9537400 | biostudies-literature

A hybrid piezoelectric and triboelectric nanogenerator with lead-free BZT-BCT/PDMS composite and PVA film for scavenging mechanical energy.

Project description:A hybrid piezo/triboelectric nanogenerator (H/P-TENG) is designed for mechanical energy harvesting using polymer ceramic composite films; polydimethylsiloxane/Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 (PDMS/BZT-BCT) and polyvinyl alcohol (PVA). A lead-free BZT-BCT piezoelectric ceramic was prepared via solid-state method and blended into PDMS to form a series of polymer-ceramic composite films, ranging from 5% to 30% by weight. The films were forward/reverse poled with corona poling and their electrical properties were compared to non-poled samples. The H/P-TENG constructed with forward-poled 15 wt% BZT-BCT in PDMS achieved the highest open-circuit voltage, V oc of 127 V, short-circuit current density, J sc of 67 mA m-2, short-circuit charge density, Q sc of 118 μC m-2, and peak power density of 7.5 W m-2, an increase of 190% over pristine PDMS-based TENG. It was discovered that incorporating BZT-BCT into the PDMS matrix improved the triboelectric properties of PDMS. The overlapping electron cloud (OEC) model was used to explain the enhancement and the effect of poling direction of the PDMS/BZT-BCT composite used in H/P-TENG, providing fundamental knowledge of the influence of piezoelectric polarisation on contact electrification.

| S-EPMC9997075 | biostudies-literature

A High-Performance Flag-Type Triboelectric Nanogenerator for Scavenging Wind Energy toward Self-Powered IoTs.

Project description:Pervasive and continuous energy solutions are highly desired in the era of the Internet of Things for powering wide-range distributed devices/sensors. Wind energy has been widely regarded as an ideal energy source for distributed devices/sensors due to the advantages of being sustainable and renewable. Herein, we propose a high-performance flag-type triboelectric nanogenerator (HF-TENG) to efficiently harvest widely distributed and highly available wind energy. The HF-TENG is composed of one piece of polytetrafluoroethylene (PTFE) membrane and two carbon-coated polyethylene terephthalate (PET) membranes with their edges sealed up. Two ingenious internal-structure designs significantly improve the output performance. One is to place the supporting sponge strips between the PTFE and the carbon electrodes, and the other is to divide the PTFE into multiple pieces to obtain a multi-degree of freedom. Both methods can improve the degree of contact and separation between the two triboelectric materials while working. When the pair number of supporting sponge strips is two and the degree of freedom is five, the maximum voltage and current of HF-TENG can reach 78 V and 7.5 μA, respectively, which are both four times that of the untreated flag-type TENG. Additionally, the HF-TENG was demonstrated to power the LEDs, capacitors, and temperature sensors. The reported HF-TENG significantly promotes the utilization of the ambient wind energy and sheds some light on providing a pervasive and sustainable energy solution to the distributed devices/sensors in the era of the Internet of Things.

| S-EPMC9143998 | biostudies-literature

A triboelectric nanogenerator based on cosmetic fixing powder for mechanical energy harvesting.

Project description:In this work, we use commercial powder particulates (a cosmetic fixing powder) as triboelectric materials for constructing a triboelectric nanogenerator (CFP-TENG). Through finger pressing, the CFP-TENG generated approximate open-circuit voltage, short-circuit current, and maximum power density values of 1141 V, 521 µA, and 570.96 μW/cm2, respectively. Thirty-seven commercial blue LEDs can be easily lit up by the CFP-TENG. Moreover, this TENG, which was designed as a novel palette structure for harvesting mechanical energy from bicycle motion, serves as a self-powered bicycle speed sensor. In addition, the cosmetic fixing powder can be used as an effective material to enhance the triboelectric property of skin. This study provides an effective method for developing a cost-effective TENG without the use of complex surface micro-/nano-texturing.

| S-EPMC6799839 | biostudies-literature

Real single ion solvation free energies with quantum mechanical simulation.

Project description:Single ion solvation free energies are one of the most important properties of electrolyte solutions and yet there is ongoing debate about what these values are. Only the values for neutral ion pairs are known. Here, we use DFT interaction potentials with molecular dynamics simulation (DFT-MD) combined with a modified version of the quasi-chemical theory (QCT) to calculate these energies for the lithium and fluoride ions. A method to correct for the error in the DFT functional is developed and very good agreement with the experimental value for the lithium fluoride pair is obtained. Moreover, this method partitions the energies into physically intuitive terms such as surface potential, cavity and charging energies which are amenable to descriptions with reduced models. Our research suggests that lithium's solvation free energy is dominated by the free energetics of a charged hard sphere, whereas fluoride exhibits significant quantum mechanical behavior that cannot be simply described with a reduced model.

| S-EPMC5625628 | biostudies-literature

Data from a dynamic simulation in a free-floating and continuous regime of a solar greenhouse modelled in TRNSYS 17 considering simultaneously different thermal phenomena.

Project description:This dataset supports the research article "Complete greenhouse dynamic simulation tool to assess the crop thermal well-being and energy needs" [1]. In the agricultural sector, the use of energy can be very intensive [2] and the simulation of solar greenhouses is a very complex work [3]. This dataset provides the results of thermal modeling and dynamic simulation of a solar greenhouse considering simultaneously several thermal phenomena. The analysis was performed by TRNSYS 17 software (TRaNsient SYstem Simulation). The results obtained consider different phenomena that affect the thermal behavior of the greenhouse, including evapotranspiration produced by plants, heat exchange with the soil and the presence of artificial lights. Different models are presented for the calculation of the convective coefficient that best suits the presence of glass surfaces, considering the different discretization of the internal volume (single thermal zone and twenty thermal zones). The parameters that influence the thermal behavior of the greenhouse are analyzed on an hourly basis, the model has been validated with EnergyPlus. The data allow the researcher to choose a suitable greenhouse model in the case of free-floating model or in the presence of an air conditioning system.

| S-EPMC7549062 | biostudies-literature

A Coupled Thermal-Hydrological-Mechanical Damage Model and Its Numerical Simulations of Damage Evolution in APSE.

Project description:This paper proposes a coupled thermal-hydrological-mechanical damage (THMD) model for the failure process of rock, in which coupling effects such as thermally induced rock deformation, water flow-induced thermal convection, and rock deformation-induced water flow are considered. The damage is considered to be the key factor that controls the THM coupling process and the heterogeneity of rock is characterized by the Weibull distribution. Next, numerical simulations on excavation-induced damage zones in Äspö pillar stability experiments (APSE) are carried out and the impact of in situ stress conditions on damage zone distribution is analysed. Then, further numerical simulations of damage evolution at the heating stage in APSE are carried out. The impacts of in situ stress state, swelling pressure and water pressure on damage evolution at the heating stage are simulated and analysed, respectively. The simulation results indicate that (1) the v-shaped notch at the sidewall of the pillar is predominantly controlled by the in situ stress trends and magnitude; (2) at the heating stage, the existence of confining pressure can suppress the occurrence of damage, including shear damage and tensile damage; and (3) the presence of water flow and water pressure can promote the occurrence of damage, especially shear damage.

| S-EPMC5457231 | biostudies-other

Designing a Polymer-Based Hybrid with Simultaneously Improved Mechanical and Damping Properties via a Multilayer Structure Construction: Structure Evolution and a Damping Mechanism.

Project description:Though hindered phenol/polymer-based hybrid damping materials, with an excellent loss factor, attract more and more attention, the significantly decreased mechanical property and the narrow damping temperature range limit the application of such promising materials. To solve the problems, a polyurethane (hindered phenol)/polyvinyl acetate multilayer system with varied layer numbers was prepared in this study. The multilayer microstructures were first verified through the scanning electron microscopy. A subsequent molecular dynamics simulation revealed the promoted diffusion of polyurethane (hindered phenol) and polyvinyl acetate layers, the compact chain packing of the polyurethane (hindered phenol) layer, the extended chain packing of the polyvinyl acetate layer, the intermolecular hydrogen bonds among the three components and the enhanced interface interactions between the two layers in a quantitative manner. Further the mechanical and dynamic mechanical analysis detected the successful preparation of the multilayer hybrids with simultaneously improved mechanical and damping properties. Then, by a combination of molecular dynamics simulation and experiment, the relationship between the structure evolution and the properties of the multilayer hybrids was established, which was expected to have some guiding significance for industrial production.

| S-EPMC7077642 | biostudies-literature

Wearable Triboelectric Nanogenerator with Ground-Coupled Electrode for Biomechanical Energy Harvesting and Sensing.

Project description:Harvesting biomechanical energy for electricity as well as physiological monitoring is a major development trend for wearable devices. In this article, we report a wearable triboelectric nanogenerator (TENG) with a ground-coupled electrode. It has a considerable output performance for harvesting human biomechanical energy and can also be used as a human motion sensor. The reference electrode of this device achieves a lower potential by coupling with the ground to form a coupling capacitor. Such a design can significantly improve the TENG's outputs. A maximum output voltage up to 946 V and a short-circuit current of 36.3 μA are achieved. The quantity of the charge that transfers during one step of an adult walking reaches 419.6 nC, while it is only 100.8 nC for the separate single-electrode-structured device. In addition, using the human body as a natural conductor to connect the reference electrode allows the device to drive the shoelaces with integrated LEDs. Finally, the wearable TENG is able to perform motion monitoring and sensing, such as human gait recognition, step count and movement speed calculation. These show great application prospects of the presented TENG device in wearable electronics.

| S-EPMC10216270 | biostudies-literature

Semiconductor-based Multilayer Selective Solar Absorber for Unconcentrated Solar Thermal Energy Conversion.

Project description:Solar thermal energy conversion has attracted substantial renewed interest due to its applications in industrial heating, air conditioning, and electricity generation. Achieving stagnation temperatures exceeding 200?°C, pertinent to these technologies, with unconcentrated sunlight requires spectrally selective absorbers with exceptionally low emissivity in the thermal wavelength range and high visible absorptivity for the solar spectrum. In this Communication, we report a semiconductor-based multilayer selective absorber that exploits the sharp drop in optical absorption at the bandgap energy to achieve a measured absorptance of 76% at solar wavelengths and a low emittance of approximately 5% at thermal wavelengths. In field tests, we obtain a peak temperature of 225?°C, comparable to that achieved with state-of-the-art selective surfaces. With straightforward optimization to improve solar absorption, our work shows the potential for unconcentrated solar thermal systems to reach stagnation temperatures exceeding 300?°C, thereby eliminating the need for solar concentrators for mid-temperature solar applications such as supplying process heat.

| S-EPMC5509749 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data