Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Isospectrals of non-uniform Rayleigh beams with respect to their uniform counterparts.

ABSTRACT: In this paper, we look for non-uniform Rayleigh beams isospectral to a given uniform Rayleigh beam. Isospectral systems are those that have the same spectral properties, i.e. the same free vibration natural frequencies for a given boundary condition. A transformation is proposed that converts the fourth-order governing differential equation of non-uniform Rayleigh beam into a uniform Rayleigh beam. If the coefficients of the transformed equation match with those of the uniform beam equation, then the non-uniform beam is isospectral to the given uniform beam. The boundary-condition configuration should be preserved under this transformation. We present the constraints under which the boundary configurations will remain unchanged. Frequency equivalence of the non-uniform beams and the uniform beam is confirmed by the finite-element method. For the considered cases, examples of beams having a rectangular cross section are presented to show the application of our analysis.

SUBMITTER: Bhat K S

PROVIDER: S-EPMC5830768 | biostudies-literature | 2018 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Isospectrals of non-uniform Rayleigh beams with respect to their uniform counterparts.

Bhat K Srivatsa S Ganguli Ranjan R

Royal Society open science 20180214 2

In this paper, we look for non-uniform Rayleigh beams isospectral to a given uniform Rayleigh beam. Isospectral systems are those that have the same spectral properties, i.e. the same free vibration natural frequencies for a given boundary condition. A transformation is proposed that converts the fourth-order governing differential equation of non-uniform Rayleigh beam into a uniform Rayleigh beam. If the coefficients of the transformed equation match with those of the uniform beam equation, the ...[more]

PMID: 29515879

Similar Datasets

Rayleigh-scattering microscopy for tracking and sizing nanoparticles in focused aerosol beams.

Project description:Ultra-bright femtosecond X-ray pulses generated by X-ray free-electron lasers (XFELs) can be used to image high-resolution structures without the need for crystallization. For this approach, aerosol injection has been a successful method to deliver 70-2000?nm particles into the XFEL beam efficiently and at low noise. Improving the technique of aerosol sample delivery and extending it to single proteins necessitates quantitative aerosol diagnostics. Here a lab-based technique is introduced for Rayleigh-scattering microscopy allowing us to track and size aerosolized particles down to 40?nm in diameter as they exit the injector. This technique was used to characterize the 'Uppsala injector', which is a pioneering and frequently used aerosol sample injector for XFEL single-particle imaging. The particle-beam focus, particle velocities, particle density and injection yield were measured at different operating conditions. It is also shown how high particle densities and good injection yields can be reached for large particles (100-500?nm). It is found that with decreasing particle size, particle densities and injection yields deteriorate, indicating the need for different injection strategies to extend XFEL imaging to smaller targets, such as single proteins. This work demonstrates the power of Rayleigh-scattering microscopy for studying focused aerosol beams quantitatively. It lays the foundation for lab-based injector development and online injection diagnostics for XFEL research. In the future, the technique may also find application in other fields that employ focused aerosol beams, such as mass spectrometry, particle deposition, fuel injection and three-dimensional printing techniques.

| S-EPMC6211534 | biostudies-literature

Selective optical assembly of highly uniform nanoparticles by doughnut-shaped beams.

Project description:A highly efficient natural light-harvesting antenna has a ring-like structure consisting of dye molecules whose absorption band changes through selective evolutionary processes driven by external stimuli, i.e., sunlight depending on its territory and thermal fluctuations. Inspired by this fact, here, we experimentally and theoretically demonstrate the selective assembling of ring-like arrangements of many silver nanorods with particular shapes and orientations onto a substrate by the light-induced force of doughnut beams with different colours (wavelengths) and polarizations in conjunction with thermal fluctuations at room temperature. Furthermore, the majority of nanorods are electromagnetically coupled to form a prominent red-shifted collective mode of localized surface plasmons resonant with the wavelength of the irradiated light, where a spectral broadening also appears for the efficient broadband optical response. The discovered principle is a promising route for "bio-inspired selective optical assembly" of various nanomaterials that can be used in the wide field of nanotechnology.

| S-EPMC6505715 | biostudies-literature

Uniform and Non-uniform Perturbations in Brain-Machine Interface Task Elicit Similar Neural Strategies.

Project description:The neural mechanisms that take place during learning and adaptation can be directly probed with brain-machine interfaces (BMIs). We developed a BMI controlled paradigm that enabled us to enforce learning by introducing perturbations which changed the relationship between neural activity and the BMI's output. We introduced a uniform perturbation to the system, through a visuomotor rotation (VMR), and a non-uniform perturbation, through a decorrelation task. The controller in the VMR was essentially unchanged, but produced an output rotated at 30° from the neurally specified output. The controller in the decorrelation trials decoupled the activity of neurons that were highly correlated in the BMI task by selectively forcing the preferred directions of these cell pairs to be orthogonal. We report that movement errors were larger in the decorrelation task, and subjects needed more trials to restore performance back to baseline. During learning, we measured decreasing trends in preferred direction changes and cross-correlation coefficients regardless of task type. Conversely, final adaptations in neural tunings were dependent on the type controller used (VMR or decorrelation). These results hint to the similar process the neural population might engage while adapting to new tasks, and how, through a global process, the neural system can arrive to individual solutions.

| S-EPMC4994425 | biostudies-literature

Active Cloaking of a Non-Uniform Scatterer.

Project description:An object illuminated by an electromagnetic wave can be actively cloaked using a surface conformal array of radiating sources to cancel out scattering. This method is promising as elementary antennas can be used as sources while its active nature can surpass passivity-based performance limitations. While this technique has been conceptually extended to accommodate complex geometries, experimental validation past simple uniform scatterers is lacking. To address this scarcity, the design and experimental demonstration of a low-profile, active cloak capable of concealing a complex, metallic, polygonal target is presented. This cloak is constructed with commercially available monopoles and enclosed within a parallel-plate waveguide-based apparatus to approximate a quasi-2D environment. Performance is then assessed when the target is illuminated at either frontal or oblique incidence by a 1.2 GHz cylindrical wave. Overall, the cloak reduces the target's scattering cross-section by an average of 7.2 dB at frontal incidence and 8.6 dB at oblique incidence. These results demonstrate the feasibility of this kind of active cloaking for more complex scatterers containing flat surfaces and edges. Further analysis shows that the cloak possesses a functional bandwidth of 14% and can be reconfigured for single frequency operation over 0.8-1.8 GHz.

| S-EPMC7005261 | biostudies-literature

Light-Sheet Fluorescence Microscopy with Scanning Non-diffracting Beams.

Project description:Light-sheet fluorescence microscopy (LSFM) has now become a unique tool in different fields ranging from three-dimensional (3D) tissue imaging to real-time functional imaging of neuronal activities. Nevertheless, obtaining high-quality artifact-free images from large, dense and inhomogeneous samples is the main challenge of the method that still needs to be adequately addressed. Here, we demonstrate significant enhancement of LSFM image qualities by using scanning non-diffracting illuminating beams, both through experimental and numerical investigations. The effect of static and scanning illumination with several beams are analyzed and compared, and it is shown that scanning 2D Airy light-sheet is minimally affected by the inhomogeneities in the samples, and provides higher contrasts and uniform resolution over a wide field-of-view, due to its reduced spatial coherence, self-healing feature and longer penetration depth. Further, the capabilities of the illumination scheme is utilized for both single-and double-wavelength 3D imaging of large and dense mammospheres of cancer tumor cells as complex inhomogeneous biological samples.

| S-EPMC7244762 | biostudies-literature

Deep Penetration Microscopic Imaging with Non-Diffracting Airy Beams.

Project description:We report a deep penetration microscopic imaging method with a non-diffracting Airy beam. The direct mapping of volume imaging in free space shows that the axial imaging range of the Airy beam is approximately 4 times that of the traditional Gaussian beam along the axial direction while maintaining a narrow lateral width. Benefiting from its non-diffracting property, the microscopic imaging with Airy beam illumination can acquire image structures through turbid medium and capture a volumetric image in a single frame. We demonstrate the penetration ability of the Airy microscopic imaging through a strongly scattering environment with 633 nm and 780 nm lasers. The performances of the volumetric imaging method were evaluated using HeLa cells and isolated mouse kidney tissue. The thick sample was scanned layer by layer in the Gaussian mode, however, in the Airy mode, the three-dimensional (3D) structure information was projected onto a two-dimensional (2D) image, which vastly increased the volume imaging speed. To show the characteristics of the Airy microscope, we performed dynamic volumetric imaging on the isolated mouse kidney tissue with two-photon.

| S-EPMC8229875 | biostudies-literature

Time-resolved multidimensional NMR with non-uniform sampling.

Project description:Time-resolved experiments demand high resolution both in spectral dimensions and in time of the studied kinetic process. The latter requirement traditionally prohibits applications of the multidimensional experiments, which, although capable of providing invaluable information about structure and dynamics and almost unlimited spectral resolution, require too lengthy data collection. Our work shows that the problem has a solution in using modern methods of NMR data collection and signal processing. A continuous fast pulsing three-dimensional experiment is acquired using non-uniform sampling during full time of the studied reaction. High sensitivity and time-resolution of a few minutes is achieved by simultaneous processing of the full data set with the multi-dimensional decomposition. The method is verified and illustrated in realistic simulations and by measuring deuterium exchange rates of amide protons in ubiquitin. We applied the method for characterizing kinetics of in vitro phosphorylation of two tyrosine residues in an intrinsically disordered cytosolic domain of the B cell receptor protein CD79b. Signals of many residues including tyrosines in both phosphorylated and unmodified forms of CD79b are found in a heavily crowded region of 2D ¹H-¹⁵N correlation spectrum and the significantly enhanced spectral resolution provided by the 3D time-resolved approach was essential for the quantitative site-specific analysis.

| S-EPMC3929766 | biostudies-literature

Project description:The semiconductor nanowire architecture provides opportunities for non-planar electronics and optoelectronics arising from its unique geometry. This structure gives rise to a large surface area-to-volume ratio and therefore understanding the effect of nanowire surfaces on nanowire optoelectronic properties is necessary for engineering related devices. We present a systematic study of the non-uniform optical properties of Au-catalyzed GaAs/AlGaAs core-shell nanowires introduced by changes in the sidewall faceting. Significant variation in intra-wire photoluminescence (PL) intensity and PL lifetime (τ PL ) was observed along the nanowire axis, which was strongly correlated with the variation of sidewall facets from {112} to {110} from base to tip. Faster recombination occurred in the vicinity of {112}-oriented GaAs/AlGaAs interfaces. An alternative nanowire heterostructure, the radial quantum well tube consisting of a GaAs layer sandwiched between two AlGaAs barrier layers, is proposed and demonstrates superior uniformity of PL emission along the entire length of nanowires. The results emphasize the significance of nanowire facets and provide important insights for nanowire device design.

| S-EPMC7750184 | biostudies-literature

Non-diffracting multi-electron vortex beams balancing their electron-electron interactions.

Project description:The wave-like nature of electrons has been known for almost a century, but only in recent years has the ability to shape the wavefunction of EBeams (Electron-Beams) become experimentally accessible. Various EBeam wavefunctions have been demonstrated, such as vortex, self-accelerating, Bessel EBeams etc. However, none has attempted to manipulate multi-electron beams, because the repulsion between electrons rapidly alters the beam shape. Here, we show how interference effects of the quantum wavefunction describing multiple electrons can be used to exactly balance both the repulsion and diffraction-broadening. We propose non-diffracting wavepackets of multiple electrons, which can also carry orbital angular momentum. Such wavefunction shaping facilitates the use of multi-electron beams in electron microscopy with higher current without compromising on spatial resolution. Simulating the quantum evolution in three-dimensions and time, we show that imprinting such wavefunctions on electron pulses leads to shape-preserving multi-electrons ultrashort pulses. Our scheme applies to any beams of charged particles, such as protons and ion beams.Vortex electron beams are generated using single electrons but their low beam-density is a limitation in electron microscopy. Here the authors propose a scheme for the realization of non-diffracting electron beams by shaping wavepackets of multiple electrons and including electron-electron interactions.

| S-EPMC5608825 | biostudies-literature

Asymmetric and non-uniform evolution of recently duplicated human genes.

Project description:BACKGROUND: Gene duplications are a source of new genes and protein functions. The innovative role of duplication events makes families of paralogous genes an interesting target for studies in evolutionary biology. Here we study global trends in the evolution of human genes that resulted from recent duplications. RESULTS: The pressure of negative selection is weaker during a short time immediately after a duplication event. Roughly one fifth of genes in paralogous gene families are evolving asymmetrically: one of the proteins encoded by two closest paralogs accumulates amino acid substitutions significantly faster than its partner. This asymmetry cannot be explained by differences in gene expression levels. In asymmetric gene pairs the number of deleterious mutations is increased in one copy, while decreased in the other copy as compared to genes constituting non-asymmetrically evolving pairs. The asymmetry in the rate of synonymous substitutions is much weaker and not significant. CONCLUSIONS: The increase of negative selection pressure over time after a duplication event seems to be a major trend in the evolution of human paralogous gene families. The observed asymmetry in the evolution of paralogous genes shows that in many cases one of two gene copies remains practically unchanged, while the other accumulates functional mutations. This supports the hypothesis that slowly evolving gene copies preserve their original functions, while fast evolving copies obtain new specificities or functions.

| S-EPMC2942815 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data