Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and Characterization of Modified BiOCl and Their Application in Adsorption of Low-Concentration Dyes from Aqueous Solution.

ABSTRACT: The synthesis and characterization of BiOCl and Fe³⁺-grafted BiOCl (Fe/BiOCl) is reported that are developed as efficient adsorbents for the removal of cationic dyes rhodamine B (RhB) and methylene blue (MB) as well as anionic dyes methyl orange (MO) and acid orange (AO) from aqueous solutions with low concentration of 0.01~0.04 mmol/L. Characterizations by various techniques indicate that Fe³⁺ grafting induced more open porous structure and higher specific surface area. Both BiOCl and Fe/BiOCl with negatively charged surfaces showed excellent adsorption efficiency toward cationic dyes, which could sharply reach 99.6 and nearly 100% within 3 min on BiOCl and 97.0 and 98.0% within 10 min on Fe/BiOCl for removing RhB and MB, respectively. However, Fe/BiOCl showed higher adsorption capacity than BiOCl toward ionic dyes. The influence of initial dye concentration, temperature, and pH value on the adsorption capacity is comprehensively studied. The adsorption process of RhB conforms to Langmuir adsorption isotherm and pseudo-second-order kinetic feature. The excellent adsorption capacities of as-prepared adsorbents toward cationic dyes are rationalized on the basis of electrostatic attraction as well as open porous structure and high specific surface area. In comparison with Fe/BiOCl, BiOCl displays higher selective efficiency toward cationic dyes in mixed dye solutions.

SUBMITTER: Zhao Q

PROVIDER: S-EPMC5834949 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Preparation of Fe3O4@polyoxometalates Nanocomposites and Their Efficient Adsorption of Cationic Dyes from Aqueous Solution.

Project description:In this work, two magnetic adsorbents Fe3O4@1 and Fe3O4@2 were prepared by combining Fe3O4 nanoparticles and polyoxometalate hybrids [Ni(HL)2]2H2[P2Mo5O23]·4H2O (1), [H2L]5H[P2Mo5O23]·12H2O (2) (HL = 2-acetylpyridine-thiosemicarbazone). The temperature-dependent zero-field-cooled (ZFC) and field-cooled (FC) measurements indicated the blocking temperature at 160 K and 180 K, respectively. The Brunauer-Emmett-Teller (BET) surface area of Fe3O4@1 and Fe3O4@2 is 8.106 m2/g and 1.787 m2/g, respectively. Cationic dye methylene blue (MB) and anionic dye methyl orange (MO) were investigated for selective dye adsorption on Fe3O4@1 and Fe3O4@2. The two adsorbents were beneficial for selective adsorption of cationic dyes. The adsorption efficiency of MB was 94.8% for Fe3O4@1, 97.67% for Fe3O4@2. Furthermore, the two adsorbents almost maintained the same adsorption efficiency after seven runs. The maximum MB adsorption capacity of Fe3O4@1 and Fe3O4@2 is 72.07 and 73.25 mg/g, respectively. The fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) spectra of the adsorbents collected after adsorption of MB are very similar to the initial as-synthesized Fe3O4@polyoxometalates indicating the high stability of the two adsorbents. The adsorption kinetics indicated that the MB removal followed the pseudo-second-order model. These results showed that the two adsorbents had a potential application in treating wastewater.

| S-EPMC6523850 | biostudies-literature

Efficient Adsorption of Tebuconazole in Aqueous Solution by Calcium Modified Water Hyacinth-Based Biochar: Adsorption Kinetics, Mechanism, and Feasibility.

Project description:The application of fungicides (such as tebuconazole) can impose harmful impacts on the ecosystem and humans. In this study, a new calcium modified water hyacinth-based biochar (WHCBC) was prepared and its effectiveness for removing tebuconazole (TE) via adsorption from water was tested. The results showed that Ca was loaded chemically (CaC2O4) onto the surface of WHCBC. The adsorption capacity of the modified biochar increased by 2.5 times in comparison to that of the unmodified water hyacinth biochar. The enhanced adsorption was attributed to the improved chemical adsorption capacity of the biochar through calcium modification. The adsorption data were better fitted to the pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by monolayer adsorption. It was found that liquid film diffusion was the main rate-limiting step in the adsorption process. The maximum adsorption capacity of WHCBC was 40.5 mg/g for TE. The results indicate that the absorption mechanisms involved surface complexation, hydrogen bonding, and π-π interactions. The inhibitory rate of Cu2+ and Ca2+ on the adsorption of TE by WHCBC were at 4.05-22.8%. In contrast, the presence of other coexisting cations (Cr6+, K+, Mg2+, Pb2+), as well as natural organic matter (humic acid), could promote the adsorption of TE by 4.45-20.9%. In addition, the regeneration rate of WHCBC was able to reach up to 83.3% after five regeneration cycles by desorption stirring with 0.2 mol/L HCl (t = 360 min). The results suggest that WHCBC has a potential in application for removing TE from water.

| S-EPMC10145345 | biostudies-literature

Study on adsorption of phosphate from aqueous solution by zirconium modified coal gasification coarse slag.

Project description:Zr-modified materials have an adsorption affinity for phosphate ions, but because of the cost of carrier materials, they are difficult to apply on a large scale. Herein, coal gasification coarse slag (CGCS) was used as a carrier material and modified with Zr, and its dephosphorization performance was studied. A series of adsorbents with different CGCS/ZrOCl2·8H2O mass ratios were prepared, from which the adsorbent with a CGCS/ZrOCl2·8H2O mass ratio of 5 : 4 (denoted as CGCS-Zr4) was identified as the most promising for phosphate adsorption. The specific surface area of CGCS-Zr4 was much greater than that of raw CGCS (100.12 vs. 12.43 m2 g-1). CGCS-Zr4 showed good adsorption selectivity towards phosphate when competitive anions co-existed, and exhibited good reusability; the adsorption capacity in the fourth adsorption-desorption cycle remained above 11.98 mg g-1. The adsorbent was also suitable for the continuous treatment of up to 830 and 743 bed volumes of synthesised and actual wastewater, respectively. The results of Fourier-transform infrared and X-ray photoelectron spectroscopy indicated that CGCS not only plays the role of a carrier, but also that Ca and Al in CGCS play an important role in phosphate adsorption. Compared with other carrier materials such as biochar and synthetic zeolite, CGCS has the advantages of a large stockpile, low cost, and easy availability. In addition, the preparation of CGCS-Zr4 is simpler and more energy-saving. Zr-modified CGCS is a promising dephosphorization material.

| S-EPMC9179347 | biostudies-literature

Synthesis of Mesoporous Silica Adsorbent Modified with Mercapto-Amine Groups for Selective Adsorption of Cu<sup>2+</sup> Ion from Aqueous Solution.

Project description:In a sol-gel co-condensation, a mesoporous silica hybrid integrated with (3-mercaptopropyl)trimethoxysilane (TMPSH) was prepared and then reacted with allylamine via a post-surface functionalization approach. Approximately 15 mol% of TMSPSH was introduced into the mesoporous silica pore walls along with tetraethyl orthosilicate. The mercapto ligands in the prepared mesoporous silica pore walls were then reacted with allylamine (AM) to form the mercapto-amine-modified mesoporous silica adsorbent (MSH@MA). The MSH@MA NPs demonstrate highly selective adsorption of copper (Cu2+) ions (~190 mg/g) with a fast equilibrium adsorption time (30 min). The prepared adsorbent shows at least a five times more efficient recyclable stability. The MSH@MA NPs adsorbent is useful for selective adsorption of Cu2+ ions.

| S-EPMC9503849 | biostudies-literature

Polyethylene Glycol-Modified Layered Double Hydroxides: Synthesis, Characterization, and Study on Adsorption Characteristics for Removal of Acid Orange II from Aqueous Solution.

Project description:The present study aimed to improve the adsorption characteristics of the pristine layered double hydroxide (LDH) by physicochemical modification using polyethylene glycol (PEG400), a nontoxic hydrophilic polymer. With this objective, LDH was synthesized and modified with different concentrations of PEG400. The PEG-modified LDHs (LDH/PEGs) were characterized using X-ray diffraction, thermogravimetric analysis, Brunauer-Emmett-Teller surface area and porosity measurement, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potential measurements. The adsorption properties of the pristine LDH (PLDH) and the LDH/PEGs were studied for the removal of Acid Orange II from water, and the results were compared. The PLDH treated with 15% PEG solution showed ∼30% increase in adsorption capacity as compared to the PLDH. The adsorption isotherm data were analyzed using Langmuir, Freundlich, and Temkin isotherm models. The values of thermodynamic parameters such as ΔS and ΔH showed the spontaneous and endothermic nature of the adsorption process. The adsorption kinetics data for both PLDH and the LDH/PEG adsorbents presented a good fit to the pseudo-second-order kinetic model.

| S-EPMC6648746 | biostudies-literature

Synthesis, adsorption and molecular simulation study of methylamine-modified hyper-cross-linked resins for efficient removal of citric acid from aqueous solution.

Project description:A series of methylamine-modified hyper-cross-linked resins were fabricated from chloromethylated polystrene-co-divinylbenzene by two continuous reactions (Friedel-Crafts alkylation and amination). The BET surface area and pore volume of the as-prepared resins took a positive correlation to the reaction time and temperature during alkylation reaction while lessened during amination process. When running batch adsorption experiments for adsorption of citric acid, the methylamine-modified resin named HM-65-2 showed higher adsorption capacity of 136.3 mg/g and selectivity of 6.98 (citric/glucose) than the precursor resins. The pseudo-second-order rate model fitted better than the pseudo-first-order model, implying the adsorption sites distributed on the resins surface tended to be heterogeneous. Subsequently, the interactions between citric acid and the resin were investigated by means of molecular simulation. Simulation result showed the addition of nitrogen-containing groups significantly enhanced the adsorption performance of citric acid. Lastly, the dynamic column experiments were performed to obtain the suitable operating conditions for the citric acid adsorption.

| S-EPMC7295785 | biostudies-literature

Application of Biochar Derived From Pyrolysis of Waste Fiberboard on Tetracycline Adsorption in Aqueous Solution.

Project description:In this study, biochars derived from waste fiberboard biomass were applied in tetracycline (TC) removal in aqueous solution. Biochar samples were prepared by slow pyrolysis at 300, 500, and 800°C, and were characterized by ultimate analysis, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), etc. The effects of ionic strength (0-1.0 mol/L of NaCl), initial TC concentration (2.5-60 ppm), biochar dosage (1.5-2.5 g/L), and initial pH (2-10) were systemically determined. The results present that biochar prepared at 800°C (BC800) generally possesses the highest aromatization degree and surface area with abundant pyridinic N (N-6) and accordingly shows a better removal efficiency (68.6%) than the other two biochar samples. Adsorption isotherm data were better fitted by the Freundlich model (R 2 is 0.94) than the Langmuir model (R 2 is 0.85). Thermodynamic study showed that the adsorption process is endothermic and mainly physical in nature with the values of ?H 0 being 48.0 kJ/mol, ?S 0 being 157.1 J/mol/K, and ?G 0 varying from 1.02 to -2.14 kJ/mol. The graphite-like structure in biochar enables the ?-? interactions with a ring structure in the TC molecule, which, together with the N-6 acting as electron donor, is the main driving force of the adsorption process.

| S-EPMC7031499 | biostudies-literature

Synthesis of Acryl Group-Modified Adsorption Resins and Their Adsorption Properties for Matrine and Oxymatrine in Aqueous Solutions.

Project description:Three series of resins with different functional groups (PS-EA, PS-MP, and PS-BA) based on D101 copolymer were prepared via the atom transfer radical polymerization method. The adsorption capacities of functionalized resins toward matrine (MT) and oxymatrine (OM) depended on the specific surface area, the surface chemistry, and the good polarity match between the target compound and porous material. It is noted that the accumulation of functional groups uploaded on the surface of resins increased the adsorption affinity difference between the MT-functionalized resin system and OM-modified copolymer system. The selectivity of modified resins to MT and OM would attribute to polarity matching. The results could provide a possible strategy for the design of efficient adsorbents applied for the isolation the bioactive compound from complex natural products.

| S-EPMC7542831 | biostudies-literature

Influence of Magnetic Nanoparticles on Modified Polypyrrole/m-Phenylediamine for Adsorption of Cr(VI) from Aqueous Solution.

Project description:A novel, modified polypyrrole/m-phenylediamine (PPy-mPD) composite, decorated with magnetite (Fe3O4) nanoparticles, and prepared via an in-situ oxidative polymerisation, was investigated. The PPy-mPD/Fe3O4 nanocomposite was employed for the removal of highly toxic oxyanion hexavalent chromium Cr(VI) from an aqueous solution. The structure and successful formation of the PPy-mPD/Fe3O4 nanocomposite was confirmed and investigated using various techniques. The presence of Fe3O4 was confirmed by high resolution transmission electron microscopy, with an appearance of Fe lattice fringes. The estimation of the saturation magnetisation of the nanocomposite, using a vibrating sample magnetometer, was observed to be 6.6 emu/g. In batch adsorption experiments, PPy-mPD/Fe3O4 nanocomposite (25 mg) was able to remove 99.6% of 100 mg/L of Cr(VI) at pH 2 and 25 °C. Adsorption isotherms were investigated at different Cr(VI) concentration (100-600 mg/L) and temperature (15-45 °C). It was deduced that adsorption follows the Langmuir model, with a maximum adsorption capacity of 555.6 mg/g for Cr(VI) removal. Furthermore, isotherm data were used to calculate thermodynamic values for Gibbs free energy, enthalpy change and entropy change, which indicated that Cr(VI) adsorption was spontaneous and endothermic in nature. Adsorption-desorption experiments revealed that the nanocomposite was usable for two consecutive cycles with no significant loss of adsorption capacity. This research demonstrates the application potential for the fascinating properties of PPy-mPD/Fe3O4 nanocomposite as a highly efficient adsorbent for the removal of heavy metal ions from industrial wastewater.

| S-EPMC7182836 | biostudies-literature

Synthesis, Photophysics, Electrochemistry and Electrogenerated Chemiluminescence of PEG-Modified BODIPY dyes in Organic and Aqueous Solutions.

Project description:A set polyethylene glycol (PEG) appended BODIPY architectures (BOPEG1 - BOPEG3) have been prepared and studied in CH2Cl2, H2O:CH3CN (1:1) and aqueous solutions. BOPEG1 and BOPEG2 both contain a short PEG chain and differ in substitution about the BODIPY framework. BOPEG3 is comprised of a fully substituted BODIPY moiety linked to a PEG polymer that is roughly 13 units in length. The photophysics and electrochemical properties of these compounds have been thoroughly characterized in CH2Cl2 and aqueous CH3CN solutions. The behavior of BOPEG1 - BOPEG3 correlates with established rules of BODIPY stability based on substitution about the BODIPY moiety. ECL for each of these compounds was also monitored. BOPEG1, which is unsubstituted at the 2- and 6-positions dimerized upon electrochemical oxidation while BOPEG2, which contains ethyl groups at the 2- and 6-positions, was much more robust and served as an excellent ECL luminophore. BOPEG3 is highly soluble in water due to the long PEG tether and demonstrated modest ECL activity in aqueous solutions using tri-n-propylamine (TPrA) as a coreactant. As such, BOPEG3 represents the first BODIPY derivative that has been shown to display ECL in water without the need for an organic cosolvent, and marks an important step in the development of BODIPY based ECL probes for various biosensing applications.

| S-EPMC3633524 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data