Dataset Information

Predicting Cu and Zn sorption capacity of biochar from feedstock C/N ratio and pyrolysis temperature.

ABSTRACT: Biochars have been proposed for remediation of metal-contaminated water due to their low cost, high surface area and high sorption capacity for metals. However, there is a lack of understanding over how feedstock material and pyrolysis conditions contribute to the metal sorption capacity of biochar. We produced biochars from 10 different organic materials by pyrolysing at 450 °C and a further 10 biochars from cedar wood by pyrolysing at 50 °C intervals (250-700 °C). Batch sorption experiments were conducted to derive the maximum Cu and Zn sorption capacity of each biochar. The results revealed an exponential relationship between Cu and Zn sorption capacity and the feedstock C/N ratio and a sigmoidal relationship between the pyrolysis temperature and the maximum Cu and Zn sorption capacity. FTIR analysis revealed that as temperature increased, the abundance of functional groups reduced. We conclude that the high sorption capacity of high temperature biochars is due to an electrostatic attraction between positively charged Cu and Zn ions and delocalised pi-electrons on the greater surface area of these biochars. These findings demonstrate a method for predicting the maximum sorption capacity of a biochar based on the feedstock C/N ratio and the pyrolysis temperature.

SUBMITTER: Rodriguez-Vila A

PROVIDER: S-EPMC5847629 | biostudies-literature | 2018 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Predicting Cu and Zn sorption capacity of biochar from feedstock C/N ratio and pyrolysis temperature.

Rodríguez-Vila Alfonso A Selwyn-Smith Heather H Enunwa Laurretta L Smail Isla I Covelo Emma F EF Sizmur Tom T

Environmental science and pollution research international 20171229 8

Biochars have been proposed for remediation of metal-contaminated water due to their low cost, high surface area and high sorption capacity for metals. However, there is a lack of understanding over how feedstock material and pyrolysis conditions contribute to the metal sorption capacity of biochar. We produced biochars from 10 different organic materials by pyrolysing at 450 °C and a further 10 biochars from cedar wood by pyrolysing at 50 °C intervals (250-700 °C). Batch sorption experiments we ...[more]

PMID: 29288302

Similar Datasets

Project description:Elevated inorganic phosphate (Pi) concentrations in pore water of amended tailings under direct revegetation may cause toxicity in some native woody species but not native forbs or herb species, all of which are key constituents in target native plant communities for phytostabilizing base metal mine tailings. As a result, Pi sorption capacity has been quantified by a conventional batch procedure in three types of base metal mine tailings sampled from two copper (Cu)-lead (Pb)-zinc (Zn) mines, as the basis for Pi-fertiliser addition. It was found that the Pi-sorption capacity in the tailings and local soil was extremely high, far higher than highly weathered agricultural soils in literature, but similar to those of volcanic ash soils. The Langmuir P-sorption maximum was up to 7.72, 4.12, 4.02 and 3.62 mg P g-1 tailings, in the fresh tailings of mixed Cu-Pb-Zn streams (MIMTD7), the weathered tailings of mixed Cu-Pb-Zn streams (MIMTD5), EHM-TD (fresh Cu-stream, high magnetite content) and local soil (weathered shale and schist), respectively. Physicochemical factors highly correlated with the high Pi-sorption in the tailings were fine particle distribution, oxalate and dithionite-citrate-bicarbonate extractable Fe (FeO and Fed), oxalate-extractable Al and Mn, and the levels of soluble Cd and Zn, and total S and Fe. Large amounts of amorphous Fe oxides and oxyhydroxides may have been formed from the oxidation of pyritic materials and redox cycles of Fe-minerals (such as pyrite (FeS2), ankerite (Ca(Fe Mg)(CO3)2 and siderite (FeCO3), as indicated by the extractable FeO values. The likely formation of sparingly soluble Zn-phosphate in the Pb-Zn tailings containing high levels of Zn (from sphalerite ((Zn,Fe)S, ZnS, (Zn,Cd)S)) may substantially lower soluble Zn levels in the tailings through high rates of Pi-fertiliser addition. As a result, the possibility of P-toxicity in native plant species caused by the addition of soluble phosphate fertilizers would be minimal.

Project description:Microbes that colonize pyrogenic organic matter (PyOM) (also called biochar) play an important role in PyOM mineralization and crucially affect soil biogeochemical cycling, while the microbial community composition associated with PyOM particles is poorly understood. We generated two manure-based PyOMs with different characteristics (PyOM pyrolyzed at the low temperature of 300°C [i.e., PyOM300] and at the high temperature of 700°C [i.e., PyOM700]) and added them to high-carbon (4.15%) and low-C (0.37%) soil for microbial colonization. 16S rRNA gene sequencing showed that Actinobacteria, particularly Actinomycetales, was the dominant taxon in PyOM, regardless of the PyOM pyrolysis temperature and soil type. Bacterial communities associated with PyOM particles from high-C soils were similar to those in non-PyOM-amended soils. PyOM300 had higher total microbial activity and more differential bacterial communities than PyOM700. More bacterial operational taxonomic units (OTUs) preferentially thrived on the low-pyrolysis-temperature PyOM, while some specific OTUs thrived on high-pyrolysis-temperature PyOM. In particular, Chloroflexi species tended to be more prevalent in high-pyrolysis-temperature PyOM in low-C soils. In conclusion, the differences in colonized bacterial community composition between the different PyOMs were strongly influenced by the pyrolysis temperatures of PyOM, i.e., under conditions of easily mineralizable C or fused aromatic C, and by other properties, e.g., pH, surface area, and nutrient content. IMPORTANCE Pyrogenic organic matter (PyOM) is widely distributed in soil and fluvial ecosystems and plays an important role in biogeochemical cycling. Many studies have reported changes in soil microbial communities stimulated by PyOM, but very little is known about the microbial communities associated with PyOM. The microbes that colonize PyOMs can participate in the mineralization of PyOM, so changing its structure affects the fate of PyOMs and contributes to soil biogeochemical cycling. This study identified the bacterial community composition associated with PyOMs on the basis of high-throughput sequencing and demonstrated that both PyOM pyrolysis temperature and the colonization environment determined the bacterial community composition. Our work increases our understanding of the dominant phylogenetic taxa associated with PyOMs, demonstrates mechanisms mediating microbial metabolism and growth in PyOMs, and expands a new research area for pyrogenic organic matter. This study identified the bacterial community composition associated with PyOM, which is widely distributed in the environment. Most bacterial OTUs preferentially thrived on PyOM pyrolyzed at low temperature, while some specific OTUs thrived on PyOM pyrolyzed at high temperature.

Dataset Information

Predicting Cu and Zn sorption capacity of biochar from feedstock C/N ratio and pyrolysis temperature.

Publications

Predicting Cu and Zn sorption capacity of biochar from feedstock C/N ratio and pyrolysis temperature.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets