Electrochemical Reduction of Carbon Dioxide on Nitrogen-Doped Carbons: Insights from Isotopic Labeling Studies.
Ontology highlight
ABSTRACT:
SUBMITTER: Hursan D
PROVIDER: S-EPMC5848144 | biostudies-literature | 2018 Mar
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The electroreduction of carbon dioxide offers a promising avenue to produce valuable fuels and chemicals using greenhouse gas carbon dioxide as the carbon feedstock. Because industrial carbon dioxide point sources often contain numerous contaminants, such as nitrogen oxides, understanding the potential impact of contaminants on carbon dioxide electrolysis is crucial for practical applications. Herein, we investigate the impact of various nitrogen oxides, including nitric oxide, nitrogen dioxide, and nitrous oxide, on carbon dioxide electroreduction on three model electrocatalysts (i.e., copper, silver, and tin). We demonstrate that the presence of nitrogen oxides (up to 0.83%) in the carbon dioxide feed leads to a considerable Faradaic efficiency loss in carbon dioxide electroreduction, which is caused by the preferential electroreduction of nitrogen oxides over carbon dioxide. The primary products of nitrogen oxides electroreduction include nitrous oxide, nitrogen, hydroxylamine, and ammonia. Despite the loss in Faradaic efficiency, the electrocatalysts exhibit similar carbon dioxide reduction performances once a pure carbon dioxide feed is restored, indicating a negligible long-term impact of nitrogen oxides on the catalytic properties of the model catalysts.
| S-EPMC7672067 | biostudies-literature
Project description:The carbon-carbon coupling via electrochemical reduction of carbon dioxide represents the biggest challenge for using this route as platform for chemicals synthesis. Here we show that nanostructured iron (III) oxyhydroxide on nitrogen-doped carbon enables high Faraday efficiency (97.4%) and selectivity to acetic acid (61%) at very-low potential (-0.5?V vs silver/silver chloride). Using a combination of electron microscopy, operando X-ray spectroscopy techniques and density functional theory simulations, we correlate the activity to acetic acid at this potential to the formation of nitrogen-coordinated iron (II) sites as single atoms or polyatomic species at the interface between iron oxyhydroxide and the nitrogen-doped carbon. The evolution of hydrogen is correlated to the formation of metallic iron and observed as dominant reaction path over iron oxyhydroxide on oxygen-doped carbon in the overall range of negative potential investigated, whereas over iron oxyhydroxide on nitrogen-doped carbon it becomes important only at more negative potentials.
| S-EPMC5838105 | biostudies-literature
Project description:Polymer electrolyte membrane fuel cells require cheap and active electrocatalysts to drive the oxygen reduction reaction. Nitrogen-doped carbons have been extensively studied regarding their oxygen reduction reaction. The work at hand looks beyond the nitrogen chemistry and brings to light the role of oxygen. Nitrogen-doped nanocarbons were obtained by a radio-frequency plasma route at 0, 100, 250, and 350 W. The lateral size of the graphitic domain, determined from Raman spectroscopy, showed that the nitrogen plasma treatment decreased the crystallite size. Synchrotron radiation photoelectron spectroscopy showed a similar nitrogen chemistry, albeit the nitrogen concentration increased with the plasma power. Lateral crystallite size and several nitrogen moieties were plotted against the onset potential determined from oxygen reduction reaction curves. There was no correlation between the electrochemical activity and the sample structure, as determine from Raman and synchrotron radiation photoelectron spectroscopy. Near-edge X-ray absorption fine structure (NEXAFS) was performed to unravel the carbon and nitrogen local structure. A difference analysis of the NEXAFS spectra showed that the oxygen surrounding the pyridinic nitrogen was critical in achieving high onset potentials. The work shows that there were more factors at play, other than carbon organization and nitrogen chemistry.
| S-EPMC8147284 | biostudies-literature
Project description:Nitrogen-containing superporous activated carbons were prepared by chemical polymerization of aniline and nitrogen functionalization by organic routes. The resulting N-doped carbon materials were carbonized at high temperatures (600⁻800 °C) in inert atmosphere. X-ray Photoelectron Spectroscopy (XPS) revealed that nitrogen amount ranges from 1 to 4 at.% and the nature of the nitrogen groups depends on the treatment temperature. All samples were assessed as electrocatalysts for the oxygen reduction reaction (ORR) in alkaline solution (0.1 M KOH) in order to understand the role of well-developed microporosity as well as the different nitrogen functionalities on the electrocatalytic performance in ORR. It was observed that nitrogen groups generated at high temperatures were highly selective towards the water formation. Among the investigated samples, polyaniline-derived activated carbon carbonized at 800 °C displayed the best performance (onset potential of 0.88 V versus RHE and an electron transfer number of 3.4), which was attributed to the highest concentration of N⁻C⁻O sites.
| S-EPMC6515461 | biostudies-literature
Project description:Electrochemical carbon dioxide reduction to fuels presents one of the great challenges in chemistry. Herein we present an understanding of trends in electrocatalytic activity for carbon dioxide reduction over different metal catalysts that rationalize a number of experimental observations including the selectivity with respect to the competing hydrogen evolution reaction. We also identify two design criteria for more active catalysts. The understanding is based on density functional theory calculations of activation energies for electrochemical carbon monoxide reduction as a basis for an electrochemical kinetic model of the process. We develop scaling relations relating transition state energies to the carbon monoxide adsorption energy and determine the optimal value of this descriptor to be very close to that of copper.
| S-EPMC5458145 | biostudies-literature
Project description:The morphology of electrode materials is often overlooked when comparing different carbon-based electrocatalysts for carbon dioxide reduction. To investigate the role of morphological attributes, we studied polymer-derived, interconnected, N-doped carbon structures with uniformly sized meso or macropores, differing only in the pore size. We found that the carbon dioxide reduction selectivity (versus the hydrogen evolution reaction) increased around three times just by introducing the porosity into the carbon structure (with an optimal pore size of 27 nm). We attribute this change to alterations in the wetting and CO2 adsorption properties of the carbon catalysts. These insights offer a new platform to advance CO2 reduction performance by only morphological engineering of the electrocatalyst.
| S-EPMC6686629 | biostudies-literature
Project description:The activity and selectivity of a copper electrocatalyst during the electrochemical CO2 reduction reaction (eCO2RR) are largely dominated by the interplay between local reaction environment, the catalyst surface, and the adsorbed intermediates. In situ characterization studies have revealed many aspects of this intimate relationship between surface reactivity and adsorbed species, but these investigations are often limited by the spatial and temporal resolution of the analytical technique of choice. Here, Raman spectroscopy with both space and time resolution was used to reveal the distribution of adsorbed species and potential reaction intermediates on a copper electrode during eCO2RR. Principal component analysis (PCA) of the in situ Raman spectra revealed that a working electrocatalyst exhibits spatial heterogeneities in adsorbed species, and that the electrode surface can be divided into CO-dominant (mainly located at dendrite structures) and C-C dominant regions (mainly located at the roughened electrode surface). Our spectral evaluation further showed that in the CO-dominant regions, linear CO was observed (as characterized by a band at ∼2090 cm-1), accompanied by the more classical Cu-CO bending and stretching vibrations located at ∼280 and ∼360 cm-1, respectively. In contrast, in the C-C directing region, these three Raman bands are suppressed, while at the same time a band at ∼495 cm-1 and a broad Cu-CO band at ∼2050 cm-1 dominate the Raman spectra. Furthermore, PCA revealed that anodization creates more C-C dominant regions, and labeling experiments confirmed that the 495 cm-1 band originates from the presence of a Cu-C intermediate. These results indicate that a copper electrode at work is very dynamic, thereby clearly displaying spatiotemporal heterogeneities, and that in situ micro-spectroscopic techniques are crucial for understanding the eCO2RR mechanism of working electrocatalyst materials.
| S-EPMC10369669 | biostudies-literature
Project description:Five nitrogen sources (glycine, β-alanine, urea, melamine and nicotinamide) and three heating methods (thermal, monomodal microwave and multimodal microwave) are used to prepare nitrogen-doped Starbons® derived from starch. The materials are initially produced at 250-300 °C (SNx 300y ), then heated in vacuo to 800 °C to produce nitrogen-doped SNx 800y 's. Melamine gives the highest nitrogen incorporation without destroying the Starbon® pore structure and the microwave heating methods give higher nitrogen incorporations than thermal heating. The carbon dioxide adsorption capacities of the nitrogen-doped Starbons® determined gravimetrically, in many cases exceed those of S300 and S800. The carbon dioxide, nitrogen and methane adsorption isotherms of the most promising materials are measured volumetrically. Most of the nitrogen-doped materials show higher carbon dioxide adsorption capacities than S800, but lower methane and nitrogen adsorption capacities. As a result, the nitrogen-doped Starbons® exhibit significantly enhanced carbon dioxide versus nitrogen and methane versus nitrogen selectivities compared to S800.
| S-EPMC10952171 | biostudies-literature
Project description:Electrochemical CO[Formula: see text] reduction is a potential route to the sustainable production of valuable fuels and chemicals. Here, we perform CO[Formula: see text] reduction experiments on Gold at neutral to acidic pH values to elucidate the long-standing controversy surrounding the rate-limiting step. We find the CO production rate to be invariant with pH on a Standard Hydrogen Electrode scale and conclude that it is limited by the CO[Formula: see text] adsorption step. We present a new multi-scale modeling scheme that integrates ab initio reaction kinetics with mass transport simulations, explicitly considering the charged electric double layer. The model reproduces the experimental CO polarization curve and reveals the rate-limiting step to be *COOH to *CO at low overpotentials, CO[Formula: see text] adsorption at intermediate ones, and CO[Formula: see text] mass transport at high overpotentials. Finally, we show the Tafel slope to arise from the electrostatic interaction between the dipole of *CO[Formula: see text] and the interfacial field. This work highlights the importance of surface charging for electrochemical kinetics and mass transport.
| S-EPMC6946669 | biostudies-literature
Project description:Direct electrochemical reduction of CO2 to fuels and chemicals using renewable electricity has attracted significant attention partly due to the fundamental challenges related to reactivity and selectivity, and partly due to its importance for industrial CO2-consuming gas diffusion cathodes. Here, we present advances in the understanding of trends in the CO2 to CO electrocatalysis of metal- and nitrogen-doped porous carbons containing catalytically active M-N x moieties (M = Mn, Fe, Co, Ni, Cu). We investigate their intrinsic catalytic reactivity, CO turnover frequencies, CO faradaic efficiencies and demonstrate that Fe-N-C and especially Ni-N-C catalysts rival Au- and Ag-based catalysts. We model the catalytically active M-N x moieties using density functional theory and correlate the theoretical binding energies with the experiments to give reactivity-selectivity descriptors. This gives an atomic-scale mechanistic understanding of potential-dependent CO and hydrocarbon selectivity from the M-N x moieties and it provides predictive guidelines for the rational design of selective carbon-based CO2 reduction catalysts.Inexpensive and selective electrocatalysts for CO2 reduction hold promise for sustainable fuel production. Here, the authors report N-coordinated, non-noble metal-doped porous carbons as efficient and selective electrocatalysts for CO2 to CO conversion.
| S-EPMC5643516 | biostudies-literature