Dataset Information

Measurement of full-thickness macular hole size using en face optical coherence tomography.

ABSTRACT: PurposeTo assess the feasibility and interest of measuring macular hole (MH) size using en face optical coherence tomography (OCT) compared with manual diameter measurements on B-scans.MethodsAmong our previously published series of 100 patients operated for primary MH, patients whose images were acquired with Cirrus 5000 HD-OCT (Carl Zeiss Meditec) with a quality signal strength >5/10 were included. Three segmentations (internal limiting membrane, horizontal, and retinal pigment epithelium (RPE)) were compared for obtaining the most appropriate en face image. MH surface areas were measured using ImageJ software. Mean diameters calculated from surface areas (diameter=2 × ?(surface area/?)) were compared with those measured on B-scans.ResultsNineteen patients were included with a mean age of 72±8 years (56-86) and a female predominance (3/16). The mean absolute difference between horizontal and vertical diameters measured on B-scans was of 54±47??m (0-180) without reaching significance (P=0.874). RPE segmentation provided the best en face image and was feasible without and with adjustment, respectively, in 79% and 100% (cases with vitreomacular traction) of cases. No significant difference in mean diameters was observed between those calculated from en face images (435±143??m (195-693)) and those measured on horizontal B-scans (426±139??m (214-705), P=0.482).ConclusionMeasuring MH size on en face OCT images is feasible, reliable, and eliminates the potential bias related to manual measurements on B-scans. Its integration into OCT devices would offer an automated and easy-to-use option for clinical practice.

SUBMITTER: Philippakis E

PROVIDER: S-EPMC5848286 | biostudies-literature | 2018 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Measurement of full-thickness macular hole size using en face optical coherence tomography.

Philippakis E E Legrand M M El Sanharawi M M Erginay A A Couturier A A Tadayoni R R

Eye (London, England) 20171208 3

PurposeTo assess the feasibility and interest of measuring macular hole (MH) size using en face optical coherence tomography (OCT) compared with manual diameter measurements on B-scans.MethodsAmong our previously published series of 100 patients operated for primary MH, patients whose images were acquired with Cirrus 5000 HD-OCT (Carl Zeiss Meditec) with a quality signal strength >5/10 were included. Three segmentations (internal limiting membrane, horizontal, and retinal pigment epithelium (RPE ...[more]

PMID: 29219961

Similar Datasets

Project description:ImportanceImaging of the choriocapillaris in vivo is challenging with existing technology. Optical coherence tomography angiography (OCTA), if optimized, could make the imaging less challenging.ObjectiveTo investigate multiple en face image averaging on OCTA images of the choriocapillaris.Design, setting, and participantsObservational, cross-sectional case series at a referral institutional practice in Los Angeles, California. From the original cohort of 21 healthy individuals, 17 normal eyes of 17 participants were included in the study. The study dates were August to September 2016.ExposuresAll participants underwent OCTA imaging of the macula covering a 3 × 3-mm area using OCTA software (Cirrus 5000 with AngioPlex; Carl Zeiss Meditec). One eye per participant was repeatedly imaged to obtain 9 OCTA cube scan sets. Registration was first performed using superficial capillary plexus images, and this transformation was then applied to the choriocapillaris images. The 9 registered choriocapillaris images were then averaged. Quantitative parameters were measured on binarized OCTA images and compared with the unaveraged OCTA images.Main outcome and measureVessel caliber measurement.ResultsSeventeen eyes of 17 participants (mean [SD] age, 35.1 [6.0] years; 9 [53%] female; and 9 [53%] of white race/ethnicity) with sufficient image quality were included in this analysis. The single unaveraged images demonstrated a granular appearance, and the vascular pattern was difficult to discern. After averaging, en face choriocapillaris images showed a meshwork appearance. The mean (SD) diameter of the vessels was 22.8 (5.8) µm (range, 9.6-40.2 µm). Compared with the single unaveraged images, the averaged images showed more flow voids (1423 flow voids [95% CI, 967-1909] vs 1254 flow voids [95% CI, 825-1683], P < .001), smaller average size of the flow voids (911 [95% CI, 301-1521] µm2 vs 1364 [95% CI, 645-2083] µm2, P < .001), and greater vessel density (70.7% [95% CI, 61.9%-79.5%] vs 61.9% [95% CI, 56.0%-67.8%], P < .001). The distribution of the number vs sizes of the flow voids was skewed in both unaveraged and averaged images. A linear log-log plot of the distribution showed a more homogeneous distribution in the averaged images compared with the unaveraged images.Conclusions and relevanceMultiple en face averaging can improve visualization of the choriocapillaris on OCTA images, transforming the images from a granular appearance to a level where the intervascular spaces can be resolved in healthy volunteers.

Project description:To describe the features of foveal microvasculature using optical coherence tomography angiography (OCTA) and to determine the related clinical factors in eyes with surgically closed macular hole (MH).A retrospective case series of 18 patients with unilateral MH was reviewed. The patients maintained complete hole closure after vitrectomy with inner limiting membrane (ILM) peeling for at least 12 months. The healthy fellow eyes were studied as controls. The foveal microvasculature of both eyes was examined by OCTA. The area of the foveal avascular zone (FAZ) and the vascular density (VD) ratio in the superficial and deep capillary plexuses (SCP and DCP) were determined after surgery. Several clinical factors including age, stage and dimensions of MH, papillofoveal distance, the extent of nasal displacement of the fovea after surgery, postoperative central foveal thickness, and outer-retina integrity were evaluated to determine any relationships with the OCTA parameters.The mean FAZ area in both the SCP and DCP (0.29?±?0.11 mm2 and 0.39?±?0.14 mm2) was significantly smaller than those of the controls (0.45?±?0.14 mm2 and 0.62?±?0.22 mm2) (p?=?0.001 and <0.001, respectively). The mean VD ratio in the SCP (0.270?±?0.349) was similar to that of the controls (0.321?±?0.189) (p?=?0.231); however, that in the DCP (0.321?±?0.189) was significantly lower than that of the controls (0.331?±?0.119) (p?=?0.025). Only the extent of nasal displacement of the fovea was correlated with the DCP FAZ-area difference values between the study group and the controls (correlation coefficient?=?0.577; p?=?0.012).After successful MH surgery, the FAZ area in both the SCP and DCP was smaller and the VD ratio of the DCP was lower, suggesting a possible DCP vulnerability to tractional stress. As the FAZ area of the DCP in closed-MH eyes became smaller than that in the controls, the fovea was less displaced toward the optic disc, possibly reflecting a lack of retinal redundancy caused by horizontal stretching accompanied by foveal displacement.

Dataset Information

Measurement of full-thickness macular hole size using en face optical coherence tomography.

Publications

Measurement of full-thickness macular hole size using en face optical coherence tomography.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets