Dataset Information

Accuracy of one algorithm used to modify a planned DVH with data from actual dose delivery.

ABSTRACT: Detection and accurate quantification of treatment delivery errors is important in radiation therapy. This study aims to evaluate the accuracy of DVH based QA in quantifying delivery errors. Eighteen previously treated VMAT plans (prostate, H&N, and brain) were randomly chosen for this study. Conventional IMRT delivery QA was done with the ArcCHECK diode detector for error-free plans and plans with the following modifications: 1) induced monitor unit differences up to ± 3.0%, 2) control point deletion (3, 5, and 8 control points were deleted for each arc), and 3) gantry angle shift (2° uniform shift clockwise and counterclockwise). 2D and 3D distance-to-agreement (DTA) analyses were performed for all plans with SNC Patient software and 3DVH software, respectively. Subsequently, accuracy of the reconstructed DVH curves and DVH parameters in 3DVH software were analyzed for all selected cases using the plans in the Eclipse treatment planning system as standard. 3D DTA analysis for error-induced plans generally gave high pass rates, whereas the 2D evaluation seemed to be more sensitive to detecting delivery errors. The average differences for DVH parameters between each pair of Eclipse recalculation and 3DVH prediction were within 2% for all three types of error-induced treatment plans. This illustrates that 3DVH accurately quantifies delivery errors in terms of actual dose delivered to the patients. 2D DTA analysis should be routinely used for clinical evaluation. Any concerns or dose discrepancies should be further analyzed through DVH-based QA for clinically relevant results and confirmation of a conventional passing-rate-based QA.

SUBMITTER: Ma T

PROVIDER: S-EPMC5874102 | biostudies-literature | 2016 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Accuracy of one algorithm used to modify a planned DVH with data from actual dose delivery.

Ma Tianjun T Podgorsak Matthew B MB Kumaraswamy Lalith K LK

Journal of applied clinical medical physics 20160908 5

Detection and accurate quantification of treatment delivery errors is important in radiation therapy. This study aims to evaluate the accuracy of DVH based QA in quantifying delivery errors. Eighteen previously treated VMAT plans (prostate, H&N, and brain) were randomly chosen for this study. Conventional IMRT delivery QA was done with the ArcCHECK diode detector for error-free plans and plans with the following modifications: 1) induced monitor unit differences up to ± 3.0%, 2) control point de ...[more]

PMID: 27685140

Similar Datasets

Project description:ObjectivesTo perform a comprehensive within-subject image quality analysis of abdominal CT examinations reconstructed with DLIR and to evaluate diagnostic accuracy compared to the routinely applied adaptive statistical iterative reconstruction (ASiR-V) algorithm.Materials and methodsOncologic patients were prospectively enrolled and underwent contrast-enhanced CT. Images were reconstructed with DLIR with three intensity levels of reconstruction (high, medium, and low) and ASiR-V at strength levels from 10 to 100% with a 10% interval. Three radiologists characterized the lesions and two readers assessed diagnostic accuracy and calculated signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), figure of merit (FOM), and subjective image quality, the latter with a 5-point Likert scale.ResultsFifty patients (mean age: 70 ± 10 years, 23 men) were enrolled and 130 liver lesions (105 benign lesions, 25 metastases) were identified. DLIR_H achieved the highest SNR and CNR, comparable to ASiR-V 100% (p ≥ .051). DLIR_M returned the highest subjective image quality (score: 5; IQR: 4-5; p ≤ .001) and significant median increase (29%) in FOM (p < .001). Differences in detection were identified only for lesions ≤ 0.5 cm: 32/33 lesions were detected with DLIR_M and 26 lesions were detected with ASiR-V 50% (p = .031). Lesion accuracy of was 93.8% (95% CI: 88.1, 97.3; 122 of 130 lesions) for DLIR and 87.7% (95% CI: 80.8, 92.8; 114 of 130 lesions) for ASiR-V 50%.ConclusionsDLIR yields superior image quality and provides higher diagnostic accuracy compared to ASiR-V in the assessment of hypovascular liver lesions, in particular for lesions ≤ 0.5 cm.Clinical relevance statementDeep learning image reconstruction algorithm demonstrates higher diagnostic accuracy compared to iterative reconstruction in the identification of hypovascular liver lesions, especially for lesions ≤ 0.5 cm.Key points• Iterative reconstruction algorithm impacts image texture, with negative effects on diagnostic capabilities. • Medium-strength deep learning image reconstruction algorithm outperforms iterative reconstruction in the diagnostic accuracy of ≤ 0.5 cm hypovascular liver lesions (93.9% vs 78.8%), also granting higher objective and subjective image quality. • Deep learning image reconstruction algorithm can be safely implemented in routine abdominal CT protocols in place of iterative reconstruction.

Project description:ObjectiveTo evaluate whether there is a differential benefit of planned Cesarean delivery (CD) over planned vaginal delivery (VD) in women with a twin pregnancy and the first twin in cephalic presentation, depending on prespecified baseline maternal and pregnancy characteristics, and/or gestational age (GA) at delivery.MethodsThis was a secondary analysis of the Twin Birth Study, which included 2804 women with a twin pregnancy and the first twin (Twin A) in cephalic presentation between 32 + 0 and 38 + 6 weeks' gestation at 106 centers in 25 countries. Women were assigned randomly to either planned CD or planned VD. The main outcome measure was composite adverse perinatal outcome, defined as the occurrence of perinatal mortality or serious neonatal morbidity in at least one twin. The baseline maternal and pregnancy characteristics (markers) considered were maternal age, parity, history of CD, use of antenatal corticosteroids, estimated fetal weight (EFW) of Twin A, EFW of Twin B, > 25% difference in EFW between the twins, presentation of Twin B, chorionicity on ultrasound, method of conception, complications of pregnancy, ruptured membranes at randomization and GA at randomization. Separate logistic regression models were developed for each marker in order to model composite adverse perinatal outcome as a function of the specific marker, planned delivery mode and the interaction between these two terms. In addition, multivariable logistic regression analysis with backward variable elimination was performed separately in each arm of the trial. The association between planned mode of delivery and composite adverse perinatal outcome, according to GA at delivery, was assessed using logistic regression analysis.ResultsOf the 2804 women initially randomized, 1391 were included in each study arm. None of the studied baseline markers was associated with a differential benefit of planned CD over planned VD in the rate of composite adverse perinatal outcome. GA at delivery was associated differentially with composite adverse perinatal outcome in the treatment arms (P for interaction < 0.001). Among pregnancies delivered at 32 + 0 to 36 + 6 weeks, there was a trend towards a lower rate of composite adverse perinatal outcome in those in the planned-VD group compared with those in planned-CD group (29 (2.2%) vs 48 (3.6%) cases; odds ratio (OR) 0.62 (95% CI, 0.37-1.03)). In pregnancies delivered at or after 37 + 0 weeks, planned VD was associated with a significantly higher rate of composite adverse perinatal outcome, as compared with planned CD (23 (1.5%) vs 10 (0.7%) cases; OR, 2.25 (95% CI, 1.06-4.77)).ConclusionThe perinatal outcome of twin pregnancies with the first twin in cephalic presentation may differ depending on GA at delivery and planned mode of delivery. At 32-37 weeks, planned VD seems to be favorable, while, from around 37 weeks onwards, planned CD might be safer. The absolute risks of adverse perinatal outcomes at term are low and must be weighed against the increased maternal risks associated with planned CD. © 2019 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology.

Project description:BackgroundLong-read sequencing platforms offered by Oxford Nanopore Technologies (ONT) allow native DNA containing epigenetic modifications to be directly sequenced, but can be limited by lower per-base accuracies. A key step post-sequencing is basecalling, the process of converting raw electrical signals produced by the sequencing device into nucleotide sequences. This is challenging as current basecallers are primarily based on mixtures of model species for training. Here we utilise both ONT PromethION and higher accuracy PacBio Sequel II HiFi sequencing on two plants, Phebalium stellatum and Xanthorrhoea johnsonii, to train species-specific basecaller models with the aim of improving per-base accuracy. We investigate sequencing accuracies achieved by ONT basecallers and assess accuracy gains by training single-species and species-specific basecaller models. We also evaluate accuracy gains from ONT's improved flowcells (R10.4, FLO-PRO112) and sequencing kits (SQK-LSK112). For the truth dataset for both model training and accuracy assessment, we developed highly accurate, contiguous diploid reference genomes with PacBio Sequel II HiFi reads.ResultsBasecalling with ONT Guppy 5 and 6 super-accurate gave almost identical results, attaining read accuracies of 91.96% and 94.15%. Guppy's plant-specific model gave highly mixed results, attaining read accuracies of 91.47% and 96.18%. Species-specific basecalling models improved read accuracy, attaining 93.24% and 95.16% read accuracies. R10.4 sequencing kits also improve sequencing accuracy, attaining read accuracies of 95.46% (super-accurate) and 96.87% (species-specific).ConclusionsThe use of a single mixed-species basecaller model, such as ONT Guppy super-accurate, may be reducing the accuracy of nanopore sequencing, due to conflicting genome biology within the training dataset and study species. Training of single-species and genome-specific basecaller models improves read accuracy. Studies that aim to do large-scale long-read genotyping would primarily benefit from training their own basecalling models. Such studies could use sequencing accuracy gains and improving bioinformatics tools to improve study outcomes.

Project description:Volumetric-modulated arc therapy (VMAT) plans may require more control points (or segments) than some of fixed-beam IMRT plans that are created with a limited number of segments. Increasing number of control points in a VMAT plan for a given prescription dose could create a large portion of the total number of segments with small number monitor units (MUs) per segment. The purpose of this study is to investigate the impact of the small number MU/segment on the delivery accuracy of VMAT delivered with various dose rates. Ten patient datasets were planned for hippocampus sparing for whole brain irradiation. For each dataset, two VMAT plans were created with maximum dose rates of 600 MU/min (the maximum field size of 21 × 40 cm2) and 1000 MU/min (the maximum field size of 15 × 15 cm2) for a daily dose of 3 Gy. Without reoptimization, the daily dose of these plans was purposely reduced to 1.5 Gy and 1.0 Gy while keeping the same total dose. Using the two dose rates and three different daily doses, six VMAT plans for each dataset were delivered to a physical phantom to investigate how the changes of dose rate and daily doses impact on delivery accuracy. Using the gamma index, we directly compared the delivered planar dose profiles with the reduced daily doses (1.5 Gy and 1.0 Gy) to the delivered planar dose at 3 Gy daily dose, delivered at dose rate of 600 MU/min and 1000 MU/min, respectively. The average numbers of segments with MU/segment ? 1 were 35 ± 8, 87 ± 6 for VMAT-600 1.5 Gy, VMAT-600 1 Gy plans, and 30 ± 7 and 42 ± 6 for VMAT-1000 1.5 Gy and VMAT-1000 1 Gy plans, respectively. When delivered at 600 MU/min dose rate, the average gamma index passing rates (1%/1 mm criteria) of comparing delivered 1.5 Gy VMAT planar dose profiles to 3.0 Gy VMAT delivered planar dose profiles was 98.28% ± 1.66%, and the average gamma index passing rate of comparing delivered 1.0 Gy VMAT planar dose to 3.0 Gy VMAT delivered planar dose was 83.75% ± 4.86%. If using 2%/2mm and 3%/3 mm criteria, the gamma index passing rates were greater than 97% for both 1.5 Gy VMAT and 1.0 Gy VMAT delivered planar doses. At 1000MU/min dose rate, the average gamma index passing rates were 96.59% ± 2.70% for 1.5 Gy VMAT planar dose profiles and 79.37% ± 9.96% for 1.0 Gy VMAT planar dose profiles when compared to the 3.0 Gy VMAT planar delivered dose profile. When using 2%/2 mm and 3%/3 mm criteria, the gamma index passing rates were greater than 93% for both 1.5 Gy VMAT and 1.0 Gy VMAT planar delivered dose. Under a stricter gamma index criterion (1%/1 mm), significant differences in delivered planar dose profiles at different daily doses were detected, indicating that the known communication delay between the MU console and MLC console may affect VMAT delivery accuracy.

Dataset Information

Accuracy of one algorithm used to modify a planned DVH with data from actual dose delivery.

Publications

Accuracy of one algorithm used to modify a planned DVH with data from actual dose delivery.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets