Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Stress-induced reverse martensitic transformation in a Ti-51Ni (at%) alloy aged under uniaxial stress.

ABSTRACT: Ti-51Ni (at%) alloys including coherent precipitates of Ti₃Ni₄ exhibits thermally-induced B2-R transformation. If the Ti₃Ni₄ is formed under tensile stress, it orientates preferentially so that its habit plane becomes perpendicular to the tensile axis. In such specimens, stress-induced reverse R-B2 transformation is reported to occur. In the present study, the stress-induced reverse R-B2 transformation behavior was studied by infrared camera and in situ X-ray analysis. The infrared camera observation revealed that the temperature of the specimen decreases homogeneously by the application of tensile stress within the resolution of the camera. The in situ X-ray analysis revealed that stress-induced reverse R-B2 transformation and rearrangement of variants of the R-phase occurs simultaneously in the specimen.

SUBMITTER: Xiao F

PROVIDER: S-EPMC5904179 | biostudies-literature | 2018 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Stress-induced reverse martensitic transformation in a Ti-51Ni (at%) alloy aged under uniaxial stress.

Xiao Fei F Chen Hong H Jin Xuejun X Nie Zhihua Z Kakeshita Tomoyuki T Fukuda Takashi T

Scientific reports 20180417 1

Ti-51Ni (at%) alloys including coherent precipitates of Ti3Ni4 exhibits thermally-induced B2-R transformation. If the Ti3Ni4 is formed under tensile stress, it orientates preferentially so that its habit plane becomes perpendicular to the tensile axis. In such specimens, stress-induced reverse R-B2 transformation is reported to occur. In the present study, the stress-induced reverse R-B2 transformation behavior was studied by infrared camera and in sit ...[more]

PMID: 29666459

Similar Datasets

A Stress-Induced Martensitic Transformation in Aged Ti49Ni51 Alloy after High-Velocity Impact.

Project description:The effects of a high-velocity impact on the microstructure, phase transformation and mechanical property of aged Ti49Ni51 alloy are investigated. The transformation behavior and microstructure along the impact direction after impact emerge with regionalization characteristics, including a deformed region near the crater (0-4 mm) and an un-deformed region of the distal crater (5-6 mm). Stress-induced martensite is the main deformation mechanism in the deforming region of aged Ti49Ni51 alloy under high-velocity impact.

| S-EPMC5456876 | biostudies-other

Stress-induced detwinning and martensite transformation in an austenite Ni-Mn-Ga alloy with martensite cluster under uniaxial loading.

Project description:Stress-induced martensitic detwinning and martensitic transformation during step-wise compression in an austenite Ni-Mn-Ga matrix with a martensite cluster under uniaxial loading have been investigated by electron backscatter diffraction, focusing on the crystallographic features of microstructure evolution. The results indicate that detwinning occurs on twins with a high Schmid factor for both intra-plate and inter-plate twins in the hierarchical structure, resulting in a nonmodulated (NM) martensite composed only of favourable variants with [001]NM orientation away from the compression axis. Moreover, the stress-induced martensitic transformation occurs at higher stress levels, undergoing a three-stage transformation from austenite to a twin variant pair and finally to a single variant with increasing compressive stress, and theoretical calculation shows that the corresponding crystallographic configuration is accommodated to the compression stress. The present research not only provides a comprehensive understanding of martensitic variant detwinning and martensitic transformation under compression stress, but also offers important guidelines for the mechanical training process of martensite.

| S-EPMC6503927 | biostudies-literature

Deformation Induced Hierarchical Twinning Coupled with Omega Transformation in a Metastable ?-Ti Alloy.

Project description:Hierarchical twinning, at multiple length scales, was noted in a metastable body-centered cubic (bcc) ?-titanium alloy on tensile deformation. Site-specific characterization within the deformation bands, carried out using EBSD and TEM, revealed {332} <113> type primary bcc twins, containing different variants of secondary and tertiary twins, as well as the formation of stress-induced martensite (?"). Within the primary {332} <113> type twin, "destruction" of the prior quenched-in athermal ? phase was observed, while a stress-induced ? phase reforms within the tertiary twins, revealing the intricate nature of coupling between deformation twinning and displacive ? transformation.

| S-EPMC6362253 | biostudies-literature

A simple variant selection in stress-driven martensitic transformation.

Project description:The study of orientation variant selection helps to reveal the mechanism and dynamic process of martensitic transformations driven by temperature or pressure/stress. This is challenging due to the multiple variants which may coexist. While effects of temperature and microstructure in many martensitic transformations have been studied in detail, effects of stress and pressure are much less understood. Here, an in situ variant selection study of Mn2O3 across the cubic-to-orthorhombic martensitic transformation explores orientation variants at pressures up to 51.5 GPa and stresses up to 5.5 GPa, using diamond anvil cells in radial geometry with synchrotron X-ray diffraction. The diamonds not only exert pressure but also impose stress and cause plastic deformation and texture development. The crystal orientation changes were followed in situ and a {110} c 〈001〉 c // (100) o 〈010〉 o relationship was observed. Only the {110} c plane perpendicular to the stress direction was selected to become (100) o , resulting in a very strong texture of the orthorhombic phase. Contrary to most other martensitic transformations, this study reveals a clear and simple variant selection that is attributed to structural distortions under pressure and stress.

| S-EPMC6660728 | biostudies-literature

Revealing martensitic transformation and ?/? interface evolution in electron beam melting three-dimensional-printed Ti-6Al-4V.

Project description:As an important metal three-dimensional printing technology, electron beam melting (EBM) is gaining increasing attention due to its huge potential applications in aerospace and biomedical fields. EBM processing of Ti-6Al-4V as well as its microstructure and mechanical properties were extensively investigated. However, it is still lack of quantitative studies regarding its microstructural evolution, indicative of EBM thermal process. Here, we report ?' martensitic transformation and ?/? interface evolution in varied printing thicknesses of EBM-printed Ti-6Al-4V block samples by means of atom probe tomography. Quantitative chemical composition analysis suggests a general phase transformation sequence. By increasing in-fill hatched thickness, elemental partitioning ratios arise and ? volume fraction is increased. Furthermore, we observe kinetic vanadium segregation and aluminum depletion at interface front and the resultant ?/? interface widening phenomenon. It may give rise to an increased ?/? lattice mismatch and weakened ?/? interfaces, which could account for the degraded strength as printing thickness increases.

| S-EPMC4869034 | biostudies-literature

Room-temperature photo-induced martensitic transformation in a protein crystal.

Project description:Martensitic transformations are the first-order crystal-to-crystal phase transitions that occur mostly in materials such as steel, alloys and ceramics, thus having many technological applications. These phase transitions are rarely observed in molecular crystals and have not been detected in protein crystals. Reversibly switchable fluorescent proteins are widely used in biotechnology, including super-resolution molecular imaging, and hold promise as candidate biomaterials for future high-tech applications. Here, we report on a reversibly switchable fluorescent protein, Tetdron, whose crystals undergo a photo-induced martensitic transformation at room temperature. Room-temperature X-ray crystallography demonstrates that at equilibrium Tetdron chromophores are all in the trans configuration, with an ∼1:1 mixture of their protonated and deprotonated forms. Irradiation of a Tetdron crystal with 400 nm light induces a martensitic transformation, which results in Tetdron tetramerization at room temperature revealed by X-ray photocrystallography. Crystal and solution spectroscopic measurements provide evidence that the photo-induced martensitic phase transition is coupled with the chromophore deprotonation, but no trans-cis isomerization is detected in the structure of an irradiated crystal. It is hypothesized that protein dynamics assists in the light-induced proton transfer from the chromophore to the bulk solvent and in the ensuing martensitic phase transition. The unique properties of Tetdron may be useful in developing novel biomaterials for optogenetics, data storage and nanotechnology.

| S-EPMC6608640 | biostudies-literature

Transformation Pathway upon Heating of Metastable ? Titanium Alloy Ti-15Mo Investigated by Neutron Diffraction.

Project description:A transformation pathway during thermal treatment of metastable ? Ti-15Mo alloy was investigated by in situ neutron diffraction. The evolution of individual phases ? , ? , and ? was investigated during linear heating with two heating rates of 1.9 ? C / min and 5 ? C / min and during aging at 450 ? C . The results showed that with a sufficient heating rate (5 ? C / min in this case), the ? phase dissolves before the ? phase forms. On the other hand, for the slower heating rate of 1.9 ? C / min , a small temperature interval of the coexistence of the ? and ? phases was detected. Volume fractions and lattice parameters of all phases were also determined.

| S-EPMC6862573 | biostudies-literature

Transformation-Induced Relaxation and Stress Recovery of TiNi Shape Memory Alloy.

Project description:The transformation-induced stress relaxation and stress recovery of TiNi shape memory alloy (SMA) in stress-controlled subloop loading were investigated based on the local variation in temperature and transformation band on the surface of the tape in the tension test. The results obtained are summarized as follows. (1) In the loading process, temperature increases due to the exothermic martensitic transformation (MT) until the holding strain and thereafter temperature decreases while holding the strain constant, resulting in stress relaxation due to the MT; (2) In the unloading process, temperature decreases due to the endothermic reverse transformation until the holding strain and thereafter temperature increases while holding the strain constant, resulting in stress recovery due to the reverse transformation; (3) Stress varies markedly in the initial stage followed by gradual change while holding the strain constant; (4) If the stress rate is high until the holding strain in the loading and unloading processes, both stress relaxation and stress recovery are large; (5) It is important to take into account this behavior in the design of SMA elements, since the force of SMA elements varies even if the atmospheric temperature is kept constant.

| S-EPMC5453294 | biostudies-other

Dynamic reverse phase transformation induced high-strain-rate superplasticity in low carbon low alloy steels with commercial potential.

Project description:Superplastic materials are capable of exhibiting large tensile elongation at elevated temperature, which is of great industrial significance because it forms the basis of a fabrication method to produce complex shapes. Superplasticity with elongation larger than 500% has been widely realized in many metals and alloys, but seldomly been succeeded in low carbon low alloy steel, even though it is commercially applied in the largest quantity. Here we report ultrahigh superplastic elongation of 900-1200% in the FeMnAl low carbon steels at high strain rate of 10-2-10-3 s-1. Such high-strain-rate superplasticity was attributed to dynamic austenite reverse phase transformation from a heavily cold rolled ferrite to fine-grained ferrite/austenite duplex microstructure and subsequent limited dynamic grain coarsening, under which a large fraction of high angle boundaries can be resulted for superplastic deformation. It is believed that this finding of the low carbon low alloy steel with ultrahigh superplasticity and relative low cost would remarkably promote the application of superplastic forming technique in automobile, aeronautical, astronautical and other fields.

| S-EPMC5569066 | biostudies-literature

Assessment of Martensitic Transformation Paths Based on Transformation Potential Calculations.

Project description:Transformation potentials for two different martensitic transformation paths are calculated and compared to experimentally measured austenite textures of an SAE 201 stainless steel. The authors conclude that the ? ? ? ? ?' transformation path is a better match than the ? ? ?' transformation path, based on comparison of the texture evolution and transformation potentials. However, significant plastic deformation is also observed in these samples which occurs simultaneously with the transformation. The values of transformation potentials also demonstrate that the transformation path may also be a function of crystal orientation and stress state, in addition to the effect of stacking fault energy (SFE).

| S-EPMC7436946 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data