Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced extraction of butyric acid under high-pressure CO₂ conditions to integrate chemical catalysis for value-added chemicals and biofuels.

ABSTRACT:

Background

Extractive fermentation with the removal of carboxylic acid requires low pH conditions because acids are better partitioned into the solvent phase at low pH values. However, this requirement conflicts with the optimal near-neutral pH conditions for microbial growth.

Results

CO₂ pressurization was used, instead of the addition of chemicals, to decrease pH for the extraction of butyric acid, a fermentation product of Clostridium tyrobutyricum, and butyl butyrate was selected as an extractant. CO₂ pressurization (50 bar) improved the extraction efficiency of butyric acid from a solution at pH 6, yielding a distribution coefficient (D) 0.42. In situ removal of butyric acid during fermentation increased the production of butyric acid by up to 4.10 g/L h, an almost twofold increase over control without the use of an extraction process.

Conclusion

In situ extraction of butyric acid using temporal CO₂ pressurization may be applied to an integrated downstream catalytic process for upgrading butyric acid to value-added chemicals in an organic solvent.

SUBMITTER: Chun J

PROVIDER: S-EPMC5911967 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Versatile Chemical Recycling Strategies: Value-Added Chemicals from Polyester and Polycarbonate Waste.

Project description:ZnII -complexes bearing half-salan ligands were exploited in the mild and selective chemical upcycling of various commercial polyesters and polycarbonates. Remarkably, we report the first example of discrete metal-mediated poly(bisphenol A carbonate) (BPA-PC) methanolysis being appreciably active at room temperature. Indeed, Zn(2)2 and Zn(2)Et achieved complete BPA-PC consumption within 12-18 mins in 2-Me-THF, noting high bisphenol A (BPA) yields (SBPA =85-91 %) within 2-4 h. Further kinetic analysis found such catalysts to possess kapp values of 0.28±0.040 and 0.47±0.049 min-1 respectively at 4 wt%, the highest reported to date. A completely circular upcycling approach to plastic waste was demonstrated through the production of several renewable poly(ester-amide)s (PEAs), based on a terephthalamide monomer derived from bottle-grade poly(ethylene terephthalate) (PET), which exhibited excellent thermal properties.

| S-EPMC9306953 | biostudies-literature

Copper(II) invigorated EHU-30 for continuous electroreduction of CO2 into value-added chemicals.

Project description:The doping of zirconium based EHU-30 and EHU-30-NH2 metal-organic frameworks with copper(II) yielded a homogeneous distribution of the dopant with a copper/zirconium ratio of 0.04-0.05. The doping mechanism is analysed by chemical analysis, microstructural analysis and pair distribution function (PDF) analysis of synchrotron total scattering data in order to get deeper insight into the local structure. According to these data, the Cu(II) atoms are assembled within the secondary building unit by a transmetalation reaction, contrarily to UiO-66 series in which the post-synthetic metalation of the MOF takes place through chemical anchorage. The resulting materials doubled the overall performance of the parent compounds for the CO2 electroreduction, while retained stable the performance during continuous transformation reaction.

| S-EPMC9123010 | biostudies-literature

Direct Biocatalytic Processes for CO2 Capture as a Green Tool to Produce Value-Added Chemicals.

Project description:Direct biocatalytic processes for CO2 capture and transformation in value-added chemicals may be considered a useful tool for reducing the concentration of this greenhouse gas in the atmosphere. Among the other enzymes, carbonic anhydrase (CA) and formate dehydrogenase (FDH) are two key biocatalysts suitable for this challenge, facilitating the uptake of carbon dioxide from the atmosphere in complementary ways. Carbonic anhydrases accelerate CO2 uptake by promoting its solubility in water in the form of hydrogen carbonate as the first step in converting the gas into a species widely used in carbon capture storage and its utilization processes (CCSU), particularly in carbonation and mineralization methods. On the other hand, formate dehydrogenases represent the biocatalytic machinery evolved by certain organisms to convert CO2 into enriched, reduced, and easily transportable hydrogen species, such as formic acid, via enzymatic cascade systems that obtain energy from chemical species, electrochemical sources, or light. Formic acid is the basis for fixing C1-carbon species to other, more reduced molecules. In this review, the state-of-the-art of both methods of CO2 uptake is assessed, highlighting the biotechnological approaches that have been developed using both enzymes.

| S-EPMC10383722 | biostudies-literature

Nanowire-bacteria hybrids for unassisted solar carbon dioxide fixation to value-added chemicals.

Project description:Direct solar-powered production of value-added chemicals from CO2 and H2O, a process that mimics natural photosynthesis, is of fundamental and practical interest. In natural photosynthesis, CO2 is first reduced to common biochemical building blocks using solar energy, which are subsequently used for the synthesis of the complex mixture of molecular products that form biomass. Here we report an artificial photosynthetic scheme that functions via a similar two-step process by developing a biocompatible light-capturing nanowire array that enables a direct interface with microbial systems. As a proof of principle, we demonstrate that a hybrid semiconductor nanowire-bacteria system can reduce CO2 at neutral pH to a wide array of chemical targets, such as fuels, polymers, and complex pharmaceutical precursors, using only solar energy input. The high-surface-area silicon nanowire array harvests light energy to provide reducing equivalents to the anaerobic bacterium, Sporomusa ovata, for the photoelectrochemical production of acetic acid under aerobic conditions (21% O2) with low overpotential (? < 200 mV), high Faradaic efficiency (up to 90%), and long-term stability (up to 200 h). The resulting acetate (?6 g/L) can be activated to acetyl coenzyme A (acetyl-CoA) by genetically engineered Escherichia coli and used as a building block for a variety of value-added chemicals, such as n-butanol, polyhydroxybutyrate (PHB) polymer, and three different isoprenoid natural products. As such, interfacing biocompatible solid-state nanodevices with living systems provides a starting point for developing a programmable system of chemical synthesis entirely powered by sunlight.

| S-EPMC5812269 | biostudies-literature

Thermocatalytic Pyrolysis of Waste Areca Nut into Renewable Fuel and Value-Added Chemicals.

Project description:Pyrolytic oil is currently in its early stages of production and distribution but has the potential to grow into a significant renewable energy source. It may be processed into a variety of useful substances, including chemicals, and used for heating, transportation, and energy production. The present investigation involves the production and characterization of pyrolytic oil from areca nut husk (ANH), with and without ZSM-5. The pyrolysis experiment was conducted in a semibatch tubular reactor at 600 °C and a heating rate of 80 °C min-1 using ZSM-5 at 20 wt %. The pyrolytic oil was examined via elemental analysis, viscosity, density, moisture content, GC-MS, FTIR, higher heating value (HHV), and ash content. The analysis of kinetics verified that the activation energy rises in proportion to the conversion rate. Additionally, employing ZSM-5 in catalytic pyrolysis at 20 wt % boosted the yield of pyrolytic oil by 11% compared to thermal pyrolysis. Employing ZSM-5 at 20 wt % resulted in a decrease in viscosity, oxygen content, and density by approximately 43.40 cSt, 15.20%, and 168 MJ kg-1, respectively. Moreover, it led to an increase in higher heating value (HHV) and carbon content by 11.71 MJ kg1- and 14.06%, respectively. An FTIR study of pyrolytic oil revealed the occurrence of hydrocarbons, aromatics, phenols, alcohols, and oxygenated chemicals. Moreover, GC-MS analysis indicated a significant increase in hydrocarbons (10.31%) and a decrease in phenols (2.36%), acids (6.38%), and oxygenated compounds with the introduction of the catalyst. Consequently, it can be inferred that utilizing ZSM-5 at 20 wt % during the pyrolysis of ANH aids in enhancing both the yield and characteristics of the resulting pyrolysis oil.

| S-EPMC11190932 | biostudies-literature

One-Step Reforming of CO2 and CH4 into High-Value Liquid Chemicals and Fuels at Room Temperature by Plasma-Driven Catalysis.

Project description:The conversion of CO2 with CH4 into liquid fuels and chemicals in a single-step catalytic process that bypasses the production of syngas remains a challenge. In this study, liquid fuels and chemicals (e.g., acetic acid, methanol, ethanol, and formaldehyde) were synthesized in a one-step process from CO2 and CH4 at room temperature (30 °C) and atmospheric pressure for the first time by using a novel plasma reactor with a water electrode. The total selectivity to oxygenates was approximately 50-60 %, with acetic acid being the major component at 40.2 % selectivity, the highest value reported for acetic acid thus far. Interestingly, the direct plasma synthesis of acetic acid from CH4 and CO2 is an ideal reaction with 100 % atom economy, but it is almost impossible by thermal catalysis owing to the significant thermodynamic barrier. The combination of plasma and catalyst in this process shows great potential for manipulating the distribution of liquid chemical products in a given process.

| S-EPMC5656906 | biostudies-literature

Valorization of cigarette butts for synthesis of levulinic acid as top value-added chemicals.

Project description:Unprecedented in the literature, levulinic acid (LA), one of the top value-added intermediates of chemical industry, is obtained from cigarette butts as cellulose feedstock by means of a one-pot hydrothermal process carried out at 200 °C for 2 h and catalysed by phosphoric acid. The protocol avoids the use of more aggressive and toxic H2SO4 and HCl, that are generally employed on several cellulose sources (e.g. sludge paper), thus minimizing corrosion phenomena of plants. Neither chemical pre-treatment of butts nor specific purification procedure of LA are required. Notably, by simply modifying acid catalyst (e.g. using CH3COOH), another top value-added fine chemical such as 5-hydroxymethylfuraldehyde (HMF) is obtained, thus widening the scope of the method. Being cigarette filters a waste available in quantities of megatonnes per year, they represent an unlimited at no cost source of cellulose, thus enabling the up-scale to an industrial level of LA production.

| S-EPMC8338950 | biostudies-literature

Cell-free metabolic engineering enables selective biotransformation of fatty acids to value-added chemicals.

Project description:Fatty acid-derived products such as alkanes, fatty aldehydes, and fatty alcohols have many applications in the chemical industry. These products are predominately produced from fossil resources, but their production processes are often not environmentally friendly. While microbes like Escherichia coli have been engineered to convert fatty acids to corresponding products, the design and optimization of metabolic pathways in cells for high productivity is challenging due to low mass transfer, heavy metabolic burden, and intermediate/product toxicity. Here, we describe an E. coli-based cell-free protein synthesis (CFPS) platform for in vitro conversion of long-chain fatty acids to value-added chemicals with product selectivity, which can also avoid the above issues when using microbial production systems. We achieve the selective biotransformation by cell-free expression of different enzymes and the use of different conditions (e.g., light and heating) to drive the biocatalysis toward different final products. Specifically, in response to blue light, cell-free expressed fatty acid photodecarboxylase (CvFAP, a photoenzyme) was able to convert fatty acids to alkanes with approximately 90% conversion. When the expressed enzyme was switched to carboxylic acid reductase (CAR), fatty acids were reduced to corresponding fatty aldehydes, which, however, could be further reduced to fatty alcohols by endogenous reductases in the cell-free system. By using a thermostable CAR and a heating treatment, the endogenous reductases were deactivated and fatty aldehydes could be selectively accumulated (>97% in the product mixture) without over-reduction to alcohols. Overall, our cell-free platform provides a new strategy to convert fatty acids to valuable chemicals with notable properties of operation flexibility, reaction controllability, and product selectivity.

| S-EPMC9791597 | biostudies-literature

Recovering high value-added anthocyanins from blueberry pomace with ultrasound-assisted extraction.

Project description:Food waste is a potential source to replace fresh materials for obtaining functional ingredients. Blueberry pomace contains considerable amounts of anthocyanins. In this study, we investigated ultrasonic-assisted extraction (UAE) of anthocyanins from blueberry pomace. We used a Box-Behnken design (BBD) to screen and optimize the important factors influencing yield. The optimum extraction conditions were a temperature of 40 °C, an ultrasonic power of 400 W and an extraction time of 40 min. The optimum yield was 108.23 mg/100 g DW. In addition, we used a cation column to separate anthocyanins, and optimized the chromatographic conditions of HPLC to analyze and identify the main anthocyanins. Thirteen anthocyanins were found in blueberry pomace, of which Malvidin-3-Galactoside (22.65 %) was the highest. These findings provide a theoretical basis and optimized process parameters for the recovery of high value-added anthocyanins from blueberry pomace with ultrasound-assisted extraction, thus facilitating the comprehensive utilization of blueberry pomace.

| S-EPMC9579799 | biostudies-literature

Prospecting the biodiversity of the fungal family Ustilaginaceae for the production of value-added chemicals.

Project description:BackgroundUstilaginaceae (belonging to the smut fungi) are commonly known for their plant pathogenicity. Although these microbes lead to yield reduction of cereal production, they can also have an economically positive side. Ustilaginaceae naturally produce a versatile range of value-added chemicals with potential applications in the food, pharmaceutical, and chemical industry.ResultsIn this study 68 Ustilaginaceae of 13 species were screened for the production of organic acids, polyols, and glycolipids from glucose to characterize their biodiversity and identify potential novel strains for biocatalysis of these valuable chemicals. Ustilago cynodontis, Ustilago maydis, Ustilago avenae, and Sporisorium exsertum were identified as promising production organisms for itaconate, malate, succinate, and erythritol, respectively. The influence of buffer concentration (pH) on acid production was investigated. Selected strains with best itaconate and malate production were characterized in more detail in bioreactor experiments obtaining total acid concentrations of up to 47 ± 1 g L-1.ConclusionThe identification and detailed characterization of these producers of valuable chemicals highlights the potential of these unicellular smut fungi for industrial applications and is a further step towards the biotechnological utilization of Ustilaginaceae.

| S-EPMC5598272 | biostudies-literature