Dataset Information

Cell density overrides the effect of substrate stiffness on human mesenchymal stem cells' morphology and proliferation.

ABSTRACT: The effect of substrate stiffness on the cellular morphology, proliferation, and differentiation of human mesenchymal stem cells (hMSCs) has been extensively researched and well established. However, the majority of these studies are done with a low seeding density where cell to cell interactions do not play a significant role. While these conditions permit an analysis of cell-substratum interactions at the single cell level, such a model system fails to capture a critical aspect of the cellular micro-environment in vivo, i.e. the cell-cell interaction via matrix deformation (i.e., strain). To address this question, we seeded hMSCs on soft poly-acrylamide (PAA) gels, at a seeding density that permits cells to be mechanically interacting via the underlying substrate. We found that as the intercellular distance decreases with the increasing seeding density, cellular sensitivity towards the substrate rigidity becomes significantly diminished. With the increasing seeding density, the cell spread area increased on a soft substrate (500 Pa) but reduced on an even slightly stiffer substrate (2 kPa) as well as on glass making them indistinguishable at a high seeding density. Not only in terms of cell spread area but also at a high seeding density, cells formed mature focal adhesions and prominent stress fibres on a soft substrate similar to that of the cells being cultured on a stiff substrate. The decreased intercellular distance also influenced the proliferation rate of the cells: higher seeding density on the soft substrate showed cell cycle progression similar to that of the cells on glass substrates. In summary, this paper demonstrates how the effect of substrate rigidity on the cell morphology and fate is a function of inter-cellular distance when seeded on a soft substrate. Our AFM data suggest that such changes happen due to local strain stiffening of the soft PAA gel, an effect that has been rarely reported in the literature so far.

SUBMITTER: Venugopal B

PROVIDER: S-EPMC5933002 | biostudies-literature | 2018 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Cell density overrides the effect of substrate stiffness on human mesenchymal stem cells' morphology and proliferation.

Venugopal Balu B Mogha Pankaj P Dhawan Jyotsna J Majumder Abhijit A

Biomaterials science 20180501 5

The effect of substrate stiffness on the cellular morphology, proliferation, and differentiation of human mesenchymal stem cells (hMSCs) has been extensively researched and well established. However, the majority of these studies are done with a low seeding density where cell to cell interactions do not play a significant role. While these conditions permit an analysis of cell-substratum interactions at the single cell level, such a model system fails to capture a critical aspect of the cellular ...[more]

PMID: 29528341

Similar Datasets

Project description:Treating recurrent GBM is a clinical challenge due to its highly resistant and aggressive nature. In order to develop new therapeutic targets for recurrent GBM a better understanding of its molecular landscape is necessary. Here we used a cellular model, developed in our lab which generates paired primary and recurrent samples from GBM cell lines and primary patient samples hence allowing us to compare the molecular differences between the two populations. Total RNA seq analysis of parent and recurrent population of two cell lines and one patient sample revealed a significant upregulation of Extracellular matrix interaction in recurrent population. Since matrix stiffness plays a pivotal role in cell-ECM interaction and downstream signaling, we developed a system that mimicked the brain like substrate stiffness by using collagen coated polyacrylamide-based substrate whose stiffness can be modified from normal brain (0.5kPa) to tumorigenic (10kPa). Using these substrates, we were able to capture the morphological and physiological differences between parent and recurrent GBM which were not evident on plastic surfaces (~1 GPa). On 0.5kPa, unlike circular parent cells, recurrent GBM cells showed two morphologies (circular and elongated). The recurrent cells growing on 0.5kPa also showed higher proliferation, invasion, migration and in-vivo tumorigenicity in orthotropic GBM mouse model, compared to parent cells. Furthermore, recurrent cells exhibited elevated velocity irrespective of substrate stiffness, which indicated that recurrent cells may possess inherent differential mechanosignalling ability which was reflected by higher expression of ECM proteins like Collagen IVA, MMP2 and MMP9. Moreover, mice brain injected with recurrent cells grown on 0.5kPa substrate showed higher Young’s modulus values suggesting that recurrent cells conditioned on 0.5kPa make the surrounding ECM stiffer. Importantly, inhibition of EGFR signaling, that is amplified with tissue stiffening in GBM resulted in decreased invasion, migration and proliferation in 0.5kPa recurrent cells, but interestingly survival remained unaffected, highlighting the importance of mimicking the physiological stiffness of the brain mimicking clinical scenario. Total RNA seq analysis of parent and recurrent cells grown on plastic and 0.5kPa substrate identified PLEKHA7 as significantly upregulated gene specifically in 0.5kPa recurrent sample. Higher protein expression of PLEKHA7 in recurrent GBM as compared to primary GBM was validated in patient biopsies. Accordingly, PLEKHA7 knockdown reduced invasion and survival of recurrent GBM cells. Together, these data provides a model system that captures the differential mechanosensing signals of primary and recurrent GBM cells and identifies a novel potential target specific for recurrent GBM.

Project description:UnlabelledStiffness of biomaterial substrates plays a critical role in regulation of cell behavior. Although the effect of substrate stiffness on cell behavior has been extensively studied, molecular mechanisms of regulation rather than those involving cytoskeletal activities still remain elusive. In this study, we fabricated aligned ultrafine fibers and treated the fiber with different annealing temperatures to produce fibrous substrates with different stiffness. Human mesenchymal stem cells (hMSCs) were then cultured on these fibrous substrates. Our results showed that annealing treatment did not change the diameter of electrospun fibers but increased their polymer crystallinity and mechanical properties. The mRNA expression of RUNX2 was upregulated while the mRNA expression of scleraxis was downregulated in response to an increase in substrate stiffness, suggesting that increased stiffness favorably drives hMSCs into the osteogenic lineage. With subsequent induction of osteogenic differentiation, osteogenesis of hMSCs on stiffer substrates was increased compared to that of the cells on control substrates. Cells on stiffer substrates increasingly activated AKT and YAP and upregulated transcript expression of YAP target genes compared to those on control substrates, and inhibition of AKT led to decreased expression of YAP and RUNX2. Furthermore, macrophage migration inhibitory factor (MIF) was increasingly produced by the cell on stiffer substrates, and knocking down MIF by siRNA resulted in decreased AKT phosphorylation. Taken together, we hereby demonstrate that simply using the annealing approach can manipulate stiffness of an aligned fibrous substrate without altering the material chemistry, and substrate stiffness dictates hMSC differentiation through the MIF-mediated AKT/YAP/RUNX2 pathway.Statement of significanceStiffness of biomaterial substrates plays a critical role in regulation of cell behavior. Although the effect of substrate stiffness on cell behavior has been extensively studied, molecular mechanisms of regulation rather than those involving cytoskeletal activities still remain elusive. In this manuscript, we report our new findings that simply using the annealing approach can manipulate stiffness of an aligned fibrous substrate without altering the material chemistry, and substrate stiffness dictates human mesenchymal stem cell (hMSC) differentiation through the macrophage migration inhibitory factor-mediated AKT/YAP/RUNX2 pathway. The findings are novel and interesting because we have identified a new mechanism rather than those involving cytoskeleton activity, by which substrate stiffness regulates hMSC behavior.

Project description:Three-dimensional hydrogel constructs incorporated with live stem cells that support chondrogenic differentiation and maintenance offer a promising regenerative route towards addressing the limited self-repair capabilities of articular cartilage. In particular, hydrogel scaffolds that augment chondrogenesis and recapitulate the native physical properties of cartilage, such as compressive strength, can potentially be applied in point-of-care procedures. We report here the synthesis of two new materials, [poly-l-lactic acid/polyethylene glycol/poly-l-lactic acid] (PLLA-PEG 1000) and [poly-d,l-lactic acid/polyethylene glycol/poly-d,l-lactic acid] (PDLLA-PEG 1000), that are biodegradable, biocompatible (>80% viability post fabrication), and possess high, physiologically relevant mechanical strength (∼1500 to 1800kPa). This study examined the effects of physiologically relevant cell densities (4, 8, 20, and 50×106/mL) and hydrogel stiffnesses (∼150kPa to∼1500kPa Young's moduli) on chondrogenesis of human bone marrow stem cells incorporated in hydrogel constructs fabricated with these materials and a previously characterized PDLLA-PEG 4000. Results showed that 20×106cells/mL, under a static culture condition, was the most efficient cell seeding density for extracellular matrix (ECM) production on the basis of hydroxyproline and glycosaminoglycan content. Interestingly, material stiffness did not significantly affect chondrogenesis, but rather material concentration was correlated to chondrogenesis with increasing levels at lower concentrations based on ECM production, chondrogenic gene expression, and histological analysis. These findings establish optimal cell densities for chondrogenesis within three-dimensional cell-incorporated hydrogels, inform hydrogel material development for cartilage tissue engineering, and demonstrate the efficacy and potential utility of PDLLA-PEG 1000 for point-of-care treatment of cartilage defects.Statement of significanceEngineering cartilage with physiologically relevant mechanical properties for point-of-care applications represents a major challenge in orthopedics, given the generally low mechanical strengths of traditional hydrogels used in cartilage tissue engineering. In this study, we characterized a new material that possesses high mechanical strength similar to native cartilage, and determined the optimal cell density and scaffold stiffness to achieve the most efficient chondrogenic response from seeded human bone marrow stem cells. Results show robust chondrogenesis and strongly suggest the potential of this material to be applied clinically for point-of-care repair of cartilage defects.

Dataset Information

Cell density overrides the effect of substrate stiffness on human mesenchymal stem cells' morphology and proliferation.

Publications

Cell density overrides the effect of substrate stiffness on human mesenchymal stem cells' morphology and proliferation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets