Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Reversible Bis(Salamo)-Based Fluorescence Sensor for Selective Detection of Cd2+ in Water-Containing Systems and Food Samples.

ABSTRACT: A novel, simple, highly selective, and sensitive fluorescence chemosensor for detecting Cd2+ that was constructed from a bis(salamo)-type compound (H?L) with two N?O? chelating moieties as ionophore was successfully developed. Sensor H?L could show fluorescence turn-on response rapidly and significant selectivity to Cd2+ over many other metallic ions (Cu2+, Ba2+, Ca2+, K?, Cr3+, Mn2+, Sr2+, Co2+, Na?, Li?, Ni2+, Ag?, and Zn2+), and a clear change in color from colorless to yellow that can be very easily observed via the naked eyes in the existence of Cd2+, while other metallic ions do not induce such a change. Interestingly, its fluorescent intensity was increased sharply with the increased concentration of Cd2+. The detection limit of sensor H?L towards Cd2+ was down to 8.61 × 10-7 M.

SUBMITTER: Hao J

PROVIDER: S-EPMC5951369 | biostudies-literature | 2018 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A Reversible Bis(Salamo)-Based Fluorescence Sensor for Selective Detection of Cd2+ in Water-Containing Systems and Food Samples.

Hao Jing J Li Xiao-Yan XY Zhang Yang Y Dong Wen-Kui WK

Materials (Basel, Switzerland) 20180329 4

A novel, simple, highly selective, and sensitive fluorescence chemosensor for detecting Cd2+ that was constructed from a bis(salamo)-type compound (H₄L) with two N₂O₂ chelating moieties as ionophore was successfully developed. Sensor H₄L could show fluorescence turn-on response rapidly and significant selectivity to Cd2+ over many other metallic ions (Cu2+, Ba2+, Ca2+, K⁺, Cr3+, Mn2+, Sr2+, Co2+, N ...[more]

PMID: 29596360

Similar Datasets

Reversible photodynamic chloride-selective sensor based on photochromic spiropyran.

Project description:We report here for the first time on a reversible photodynamic bulk optode sensor based on the photoswitching of a spiropyran derivative (Sp). The photoswitching of Sp induces a large basicity increase in the polymeric phase, which triggers the extraction of Cl(-) and H(+). Cl(-) is stabilized by a lipophilic chloride-selective ionophore inside the membrane, while H(+) binds with the open form of Sp and induces a spectral change, hence providing the sensor signal. The system was studied with spectroscopic and electrochemical methods.

| S-EPMC3557920 | biostudies-literature

Graphene as a Reversible and Spectrally Selective Fluorescence Quencher.

Project description:We report reversible and spectrally selective fluorescence quenching of quantum dots (QDs) placed in close proximity to graphene. Controlling interband electronic transitions of graphene via electrostatic gating greatly modifies the fluorescence lifetime and intensity of nearby QDs via blocking of the nonradiative energy transfer between QDs and graphene. Using ionic liquid (IL) based electrolyte gating, we are able to control Fermi energy of graphene in the order of 1 eV, which yields electrically controllable fluorescence quenching of QDs in the visible spectrum. Indeed, our technique enables us to perform voltage controllable spectral selectivity among quantum dots at different emission wavelengths. We anticipate that our technique will provide tunable light-matter interaction and energy transfer that could yield hybrid QDs-graphene based optoelectronic devices with novel functionalities, and additionally, may be useful as a spectroscopic ruler, for example, in bioimaging and biomolecular sensing. We propose that graphene can be used as an electrically tunable and wavelength selective fluorescence quencher.

| S-EPMC5031993 | biostudies-literature

Unexpected Fluorescence Emission Behaviors of Tetraphenylethylene-Functionalized Polysiloxane and Highly Reversible Sensor for Nitrobenzene.

Project description:Tetraphenylethylene (TPE), a typical luminogen with aggregation-induced emission (AIE) features, has been widely used to prepare AIE fluorescent materials. In this study, TPE-functionalized polydimethylsiloxane (n-TPE-AP-PDMS) was successfully synthesized by attaching TPE to polydimethylsiloxane via aza-Michael addition. The introduction of polydimethylsiloxane to TPE had no obvious effect on photophysical properties. Intriguingly, n-TPE-AP-PDMS exhibited two opposite fluorescence emission behaviors in different systems: aggregation-induced quenching (ACQ) behavior in a tetrahydrofuran/water mixture and typical AIE phenomenon in a tetrahydrofuran/hexane mixture. This unexpected transition from ACQ to AIE can be attributed to a twisted intramolecular charge-transfer effect and flexible aminopropyl polydimethylsiloxane. n-TPE-AP-PDMS was further used as a fluorescent probe to detect nitrobenzene and it showed high quenching efficiency. Moreover, the n-TPE-AP-PDMS film showed high reversibility so that the quenching efficiency remained constant after five cycles. This work can provide a deeper understanding of AIE behavior and guidance to develop a new AIE polymer for chemosensors with high performance.

| S-EPMC8470815 | biostudies-literature

Tripeptide Derivative-Modified Glassy Carbon Electrode: A Novel Electrochemical Sensor for Sensitive and Selective Detection of Cd2+ Ions.

Project description:A N-[(Benzyloxy)carbonyl]-l-alanyl-l-prolyl-l-leucine-N-cyclohexylcyclohexanamine (Cbz-APL) tripeptide-coated glassy carbon electrode (GCE)-based sensor was used for sensitive and selective recognition of cadmium ions in environmental water. Detailed cyclic voltammetric and electrochemical impedance spectroscopic studies were performed to investigate the charge transfer and sensing activity of the developed electrochemical sensor. Square wave anodic stripping voltammetry (SWASV) was employed to further investigate the sensitivity, selectivity, validity, and applicability of the developed sensor. A sharp electrochemical signal of oxidized Cd at -0.84 V versus Ag/AgCl provides evidence for the higher sensing ability of Cbz-APL/GCE than bare GCE at -0.79 V. Moreover, on Cbz-APL/GCE, extraordinary low detection limits of 4.34 fM and linearity range of 15 nM to 0.1 pM with coefficients of correlation higher than 0.99 for Cd2+ were achieved. Besides, the influence of inorganic and organic interferents on the targeted analyte signals was examined, and high selectivity of Cbz-APL/GCE for Cd2+ ions was observed. Lastly, the validity and applicability of the developed electrochemical sensor for the detection of Cd2+ ions were checked in real water samples, and 100% recovery was obtained.

| S-EPMC7203962 | biostudies-literature

Furo[3,2-c]coumarin-derived Fe3+ Selective Fluorescence Sensor: Synthesis, Fluorescence Study and Application to Water Analysis.

Project description:Furocoumarin (furo[3,2-c]coumarin) derivatives have been synthesized from single step, high yielding (82-92%) chemistry involving a 4-hydroxycoumarin 4?+?1 cycloaddition reaction. They are characterized by FTIR, 1H-NMR, and, for the first time, a comprehensive UV-Vis and fluorescence spectroscopy study has been carried out to determine if these compounds can serve as useful sensors. Based on the fluorescence data, the most promising furocoumarin derivative (2-(cyclohexylamino)-3-phenyl-4H-furo[3,2-c]chromen-4-one, FH), exhibits strong fluorescence (?F?=?0.48) with long fluorescence lifetime (5.6?ns) and large Stokes' shift, suggesting FH could be used as a novel fluorescent chemosensor. FH exhibits a highly selective, sensitive and instant turn-off fluorescence response to Fe3+ over other metal ions which was attributed to a charge transfer mechanism. Selectivity was demonstrated against 13 other competing metal ions (Na+, K+, Mg2+, Ca2+, Mn2+, Fe2+, Al3+, Ni2+, Cu2+, Zn2+, Co2+, Pb2+ and Ru3+) and aqueous compatibility was demonstrated in 10% MeOH-H2O solution. The FH sensor coordinates Fe3+ in a 1:2 stoichiometry with a binding constant, Ka?=?5.25 × 103?M-1. This novel sensor has a limit of detection of 1.93?µM, below that of the US environmental protection agency guidelines (5.37?µM), with a linear dynamic range of ~28 (~2-30?µM) and an R2 value of 0.9975. As an exemplar application we demonstrate the potential of this sensor for the rapid measurement of Fe3+ in mineral and tap water samples demonstrating the real-world application of FH as a "turn off" fluorescence sensor.

| S-EPMC7198544 | biostudies-literature

Multi-Bandgap Monolithic Metal Nanowire Percolation Network Sensor Integration by Reversible Selective Laser-Induced Redox.

Project description:Active electronics are usually composed of semiconductor and metal electrodes which are connected by multiple vacuum deposition steps and photolithography patterning. However, the presence of interface of dissimilar material between semiconductor and metal electrode makes various problems in electrical contacts and mechanical failure. The ideal electronics should not have defective interfaces of dissimilar materials. In this study, we developed a novel method to fabricate active electronic components in a monolithic seamless fashion where both metal and semiconductor can be prepared from the same monolith material without creating a semiconductor-metal interface by reversible selective laser-induced redox (rSLIR) method. Furthermore, rSLIR can control the oxidation state of transition metal (Cu) to yield semiconductors with two different bandgap states (Cu2O and CuO with bandgaps of 2.1 and 1.2 eV, respectively), which may allow multifunctional sensors with multiple bandgaps from the same materials. This novel method enables the seamless integration of single-phase Cu, Cu2O, and CuO, simultaneously while allowing reversible, selective conversion between oxidation states by simply shining laser light. Moreover, we fabricated a flexible monolithic metal-semiconductor-metal multispectral photodetector that can detect multiple wavelengths. The unique monolithic characteristics of rSLIR process can provide next-generation electronics fabrication method overcoming the limitation of conventional photolithography methods.

| S-EPMC8789997 | biostudies-literature

Electrified Soft Interface as a Selective Sensor for Cocaine Detection in Street Samples.

Project description:A straightforward, direct, and selective method is presented for electrochemical cocaine identification in street samples. The sensing mechanism is based on a simple ion transfer reaction across the polarized liquid-liquid interface. The interfacial behavior of a number of cutting agents is also reported. Interfacial miniaturization has led to improved electroanalytical properties of the liquid-liquid interface based sensor as compared with the macroscopic analogue. The reported method holds great potential to replace colorimetric tests with poor selectivity for on-site street sample analysis.

| S-EPMC6011179 | biostudies-literature

Exploration and application of a highly sensitive bis(salamo)-based fluorescent sensor for B4O72- in water-containing systems and living cells.

Project description:A highly selective fluorescent sensor H4L based on a bis(salamo)-type compound with two N2O2 chelating moieties as ionophore was successfully developed. Sensor H4L was found to have excellent selectivity for B4O72- over many other anions (Br-, CI-, CN-, CO32-, HCO3-, H2PO4-, HSO4-, NO3-, OAc-, S2O3-, SCN-, SO42-, Hcy (homocysteine) and H2O2), and it exhibited an approximately 150-fold enhancement of the fluorescence response to B4O72- in Tris-HCl buffer (DMF/H2O?=?9:1, v/v, pH?=?7) solutions. Significantly, its fluorescence intensity was enhanced in a linear fashion with increasing concentrations of B4O72-. The detection limit of sensor H4L towards B4O72- was 8.61?×?10-7 M. The test strips could conveniently, efficiently and simply detect B4O72- ions in Tris-HCl buffer (DMF/H2O?=?9:1, v/v, pH?=?7) solutions. Furthermore, sensor H4L showed excellent membrane permeability in living cells, and it was successfully used to monitor intracellular B4O72- by confocal luminescence imaging.

| S-EPMC6145891 | biostudies-other

Reversible fluorescence photoswitching in DNA.

Project description:We describe the engineering of reversible fluorescence photoswitching in DNA with high-density substitution, and its applications in advanced fluorescence microscopy methods. High-density labeling of DNA with cyanine dyes can be achieved by polymerase chain reaction using a modified DNA polymerase that has been evolved to efficiently incorporate Cy3- and Cy5-labeled cytosine base analogues into double-stranded DNA. The resulting biopolymer, "CyDNA", displays hundreds of fluorophores per DNA strand and is strongly colored and highly fluorescent, although previous observations suggest that fluorescence quenching at such high density might be a concern, especially for Cy5. Herein, we first investigate the mechanisms of fluorescence quenching in CyDNA and we suggest that two different mechanisms, aggregate formation and resonance energy transfer, are responsible for fluorescence quenching at high labeling densities. Moreover, we have been able to re-engineer CyDNA into a reversible fluorescence photoswitchable biopolymer by using the properties of the Cy3-Cy5 pair. This novel biopolymer constitutes a new class of photoactive DNA-based nanomaterial and is of great interest for advanced microscopy applications. We show that reversible fluorescence photoswitching in CyDNA can be exploited in optical lock-in detection imaging. It also lays the foundations for improved and sequence-specific super-resolution fluorescence microscopy of DNA.

| S-EPMC3439957 | biostudies-literature

Selective Affinity Enrichment of Nitrotyrosine-Containing Peptides for Quantitative Analysis in Complex Samples.

Project description:Protein tyrosine nitration by oxidative and nitrate stress is important in the pathogenesis of many inflammatory or aging-related diseases. Mass spectrometry analysis of protein nitrotyrosine is very challenging because the non-nitrated peptides suppress the signals of the low-abundance nitrotyrosine (NT) peptides. No validated methods for enrichment of NT-peptides are currently available. Here we report an immunoaffinity enrichment of NT-peptides for proteomics analysis. The effectiveness of this approach was evaluated using nitrated protein standards and whole-cell lysates in vitro. A total of 1881 NT sites were identified from a nitrated whole-cell extract, indicating that this immunoaffinity-MS method is a valid approach for the enrichment of NT-peptides, and provides a significant advance for characterizing the nitrotyrosine proteome. We noted that this method had higher affinity to peptides with N-terminal nitrotyrosine relative to peptides with other nitrotyrosine locations, which raises the need for future study to develop a pan-specific nitrotyrosine antibody for unbiased, proteome-wide analysis of tyrosine nitration. We applied this method to quantify the changes in protein tyrosine nitration in mouse lungs after intranasal poly(I:C) treatment and quantified 237 NT sites. This result indicates that the immunoaffinity-MS method can be used for quantitative analysis of protein nitrotyrosines in complex samples.

| S-EPMC5656043 | biostudies-literature