Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Detection of chikungunya virus DNA using two-dimensional MoS2 nanosheets based disposable biosensor.

ABSTRACT: Development of platforms for a reliable, rapid, sensitive and selective detection of chikungunya virus (CHIGV) is the need of the hour in developing countries. To the best of our knowledge, there are no reports available for the electrochemical detection of CHIGVDNA. Therefore, we aim at developing a biosensor based on molybdenum disulphide nanosheets (MoS2 NSs) for the point-of-care diagnosis of CHIGV. Briefly, MoS2 NSs were synthesized by chemical route and characterized using scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopy, Raman spectroscopy and X-Ray Diffraction. MoS2 NSs were then subjected to physical adsorption onto the screen printed gold electrodes (SPGEs) and then employed for the detection of CHIGV DNA using electrochemical voltammetric techniques. Herein, the role of MoS2 NSs is to provide biocompatibility to the biological recognition element on the surface of the screen printed electrodes. The detection strategy employed herein is the ability of methylene blue to interact differentially with the guanine bases of the single and double-stranded DNA which leads to change in the magnitude of the voltammetric signal. The proposed genosensor exhibited a wide linear range of 0.1 nM to 100 µM towards the chikungunya virus DNA.

SUBMITTER: Singhal C

PROVIDER: S-EPMC5955964 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Interface strain in vertically stacked two-dimensional heterostructured carbon-MoS2 nanosheets controls electrochemical reactivity.

Project description:Two-dimensional (2D) materials offer numerous advantages for electrochemical energy storage and conversion due to fast charge transfer kinetics, highly accessible surface area, and tunable electronic and optical properties. Stacking of 2D materials generates heterogeneous interfaces that can modify native chemical and physical material properties. Here, we demonstrate that local strain at a carbon-MoS2 interface in a vertically stacked 2D material directs the pathway for chemical storage in MoS2 on lithium metal insertion. With average measured MoS2 strain of ?0.1% due to lattice mismatch between the carbon and MoS2 layers, lithium insertion is facilitated by an energy-efficient cation-exchange transformation. This is compared with low-voltage lithium intercalation for unstrained MoS2. This observation implies that mechanical properties of interfaces in heterogeneous 2D materials can be leveraged to direct energetics of chemical processes relevant to a wide range of applications such as electrochemical energy storage and conversion, catalysis and sensing.

| S-EPMC4895792 | biostudies-literature

Two-dimensional lanthanide coordination polymer nanosheets for detection of FOX-7.

Project description:Despite the recent surge of interest in two-dimensional (2D) inorganic nanosheets derived from photoactive coordination polymers of lanthanide ions having interesting optical properties, research in this area is still in its infancy. Luminescent lanthanide ions, Eu(iii) or/and Tb(iii), as well as a bis-terpyridine ligand (L), were used in this study as the building blocks for the synthesis of the archetypical layered structure of coordination polymers (CPs) (L·Eu/L·Tb). 2D-nanosheets were obtained through exfoliation of the layered precursor of CPs in a suitable solvent system following a sonication-assisted strategy. These nanosheets exhibit lateral sizes on the micrometer scale (0.3-1 μm) and an ultrathin thickness of 2-6.5 nm. 1,1-Diamino-2,2-dinitroethene or FOX-7 is an insensitive high explosive; in a binder mixture, it exhibits a slightly superior detonation velocity of 8870 m s-1 in comparison to RDX. The insensitive nature of FOX-7 makes it a key component for the development of low vulnerable high explosive compositions for further application in weaponry. The growing demand for FOX-7, for use as a suitable replacement of conventional explosives, is of serious concern to human security. Achieving rapid and efficient detection of this unexplored explosive is a challenging task. In the present study, the developed luminescent nanosheets were used for the first time for micromolar level detection of FOX-7 both in solution and in the solid state. A visually distinct color change of the nanosheets from red (L·Eu) and green (L·Tb) to colorless was witnessed upon UV light irradiation during the detection process. Notably, the solid-state detection technique could be exploited for developing a commercial spray kit for quick onsite screening of this important explosive.

| S-EPMC8146459 | biostudies-literature

Disposable all-printed electronic biosensor for instantaneous detection and classification of pathogens.

Project description:A novel disposable all-printed electronic biosensor is proposed for a fast detection and classification of bacteria. This biosensor is applied to classify three types of popular pathogens: Salmonella typhimurium, and the Escherichia coli strains JM109 and DH5-?. The proposed sensor consists of inter-digital silver electrodes fabricated through an inkjet material printer and silver nanowires uniformly decorated on the electrodes through the electrohydrodynamic technique on a polyamide based polyethylene terephthalate substrate. The best sensitivity of the proposed sensor is achieved at 200?µm teeth spaces of the inter-digital electrodes along the density of the silver nanowires at 30?×?103/mm2. The biosensor operates on ±2.5?V and gives the impedance value against each bacteria type in 8?min after sample injection. The sample data are measured through an impedance analyzer and analyzed through pattern recognition methods such as linear discriminate analysis, maximum likelihood, and back propagation artificial neural network to classify each type of bacteria. A perfect classification and cross-validation is achieved by using the unique fingerprints extracted from the proposed biosensor through all the applied classifiers. The overall experimental results demonstrate that the proposed disposable all-printed biosensor is applicable for the rapid detection and classification of pathogens.

| S-EPMC5897556 | biostudies-literature

Two-Dimensional Disposable Graphene Sensor to Detect Na+ Ions.

Project description:The monitoring of Na+ ions distributed in the body has been indirectly calculated by the detection of Na+ ions in urine. We fabricated a two-dimensional (2D) Na+ ion sensor using a graphene ion-sensitive field-effect transistor (G-ISFET) and used fluorinated graphene as a reference electrode (FG-RE). We integrated G-ISFET and FG on a printed circuit board (PCB) designed in the form of a secure digital (SD) card to fabricate a disposable Na+ ion sensor. The sensitivity of the PCB tip to Na+ ions was determined to be -55.4 mV/dec. The sensor exhibited good linearity despite the presence of interfering ions in the buffer solution. We expanded the evaluation of the PCB tip to real human patient urine samples. The PCB tip exhibited a sensitivity of -0.36 mV/mM and linearly detected Na+ ions in human patient urine without any dilution process. We expect that G-ISFET with FG-RE can be used to realize a disposable Na+ ion sensor by serving as an alternative to Ag/AgCl reference electrodes.

| S-EPMC8003527 | biostudies-literature

Two-Dimensional Nanosheets from Redox-Active Superatoms.

Project description:We describe a new approach to synthesize two-dimensional (2D) nanosheets from the bottom-up. We functionalize redox-active superatoms with groups that can direct their assembly into multidimensional solids. We synthesized Co6Se8[PEt2(4-C6H4COOH)]6 and found that it forms a crystalline assembly. The solid-state structure is a three-dimensional (3D) network in which the carboxylic acids form intercluster hydrogen bonds. We modify the self-assembly by replacing the reversible hydrogen bonds that hold the superatoms together with zinc carboxylate bonds via the solvothermal reaction of Co6Se8[PEt2(4-C6H4COOH)]6 with Zn(NO3)2. We obtain two types of crystalline materials using this approach: one is a 3D solid and the other consists of stacked layers of 2D sheets. The dimensionality is controlled by subtle changes in reaction conditions. These 2D sheets can be chemically exfoliated, and the exfoliated, ultrathin 2D layers are soluble. After they are deposited on a substrate, they can be imaged. We cast them onto an electrode surface and show that they retain the redox activity of the superatom building blocks due to the porosity in the sheets.

| S-EPMC5620970 | biostudies-literature

Two-dimensional electronic transport and surface electron accumulation in MoS2.

Project description:Because the surface-to-volume ratio of quasi-two-dimensional materials is extremely high, understanding their surface characteristics is crucial for practically controlling their intrinsic properties and fabricating p-type and n-type layered semiconductors. Van der Waals crystals are expected to have an inert surface because of the absence of dangling bonds. However, here we show that the surface of high-quality synthesized molybdenum disulfide (MoS2) is a major n-doping source. The surface electron concentration of MoS2 is nearly four orders of magnitude higher than that of its inner bulk. Substantial thickness-dependent conductivity in MoS2 nanoflakes was observed. The transfer length method suggested the current transport in MoS2 following a two-dimensional behavior rather than the conventional three-dimensional mode. Scanning tunneling microscopy and angle-resolved photoemission spectroscopy measurements confirmed the presence of surface electron accumulation in this layered material. Notably, the in situ-cleaved surface exhibited a nearly intrinsic state without electron accumulation.

| S-EPMC5897365 | biostudies-literature

Bio-Separated and Gate-Free 2D MoS2 Biosensor Array for Ultrasensitive Detection of BRCA1.

Project description:2D molybdenum disulfide (MoS2)-based thin film transistors are widely used in biosensing, and many efforts have been made to improve the detection limit and linear range. However, in addition to the complexity of device technology and biological modification, the compatibility of the physical device with biological solutions and device reusability have rarely been considered. Herein, we designed and synthesized an array of MoS2 by employing a simple-patterned chemical vapor deposition growth method and meanwhile exploited a one-step biomodification in a sensing pad based on DNA tetrahedron probes to form a bio-separated sensing part. This solves the signal interference, solution erosion, and instability of semiconductor-based biosensors after contacting biological solutions, and also allows physical devices to be reused. Furthermore, the gate-free detection structure that we first proposed for DNA (BRCA1) detection demonstrates ultrasensitive detection over a broad range of 1 fM to 1 μM with a good linear response of R2 = 0.98. Our findings provide a practical solution for high-performance, low-cost, biocompatible, reusable, and bio-separated biosensor platforms.

| S-EPMC7924822 | biostudies-literature

Direct TEM observations of growth mechanisms of two-dimensional MoS2 flakes.

Project description:A microscopic understanding of the growth mechanism of two-dimensional materials is of particular importance for controllable synthesis of functional nanostructures. Because of the lack of direct and insightful observations, how to control the orientation and the size of two-dimensional material grains is still under debate. Here we discern distinct formation stages for MoS2 flakes from the thermolysis of ammonium thiomolybdates using in situ transmission electron microscopy. In the initial stage (400 °C), vertically aligned MoS2 structures grow in a layer-by-layer mode. With the increasing temperature of up to 780 °C, the orientation of MoS2 structures becomes horizontal. When the growth temperature reaches 850 °C, the crystalline size of MoS2 increases by merging adjacent flakes. Our study shows direct observations of MoS2 growth as the temperature evolves, and sheds light on the controllable orientation and grain size of two-dimensional materials.

| S-EPMC4947173 | biostudies-literature

Solid-State Chemiresistors from Two-Dimensional MoS2 Nanosheets Functionalized with l-Cysteine for In-Line Sensing of Part-Per-Billion Cd2+ Ions in Drinking Water.

Project description:Sensing of metal contaminants at ultralow concentrations in aqueous environments is vital in today's overpopulated world, with an extremely stringent limit (<5 ppb) for Cd2+ ions in drinking water. Here, we utilize sonochemically exfoliated molybdenum disulfide (MoS2) nanosheets functionalized with l-cysteine (Cys) as highly sensitive and selective two-dimensional (2D) materials for solid-state chemiresistors. We specifically targeted Cd2+ ions due to their high toxicity at low concentrations. MoS2-Cys nanosheets are fabricated using an ad hoc, low-complexity, one-pot synthesis method. Porous MoS2-Cys thin films with a high surface area are assembled from these nanosheets. Two-terminal chemiresistors incorporating MoS2-Cys films are demonstrated to be preferentially sensitive to Cd2+ ions at neutral pH, irrespective of other metal ions present in water flowing through the device. A 5 ppb concentration of the Cd2+ ions in the water stream increases the device resistivity by 20 times. Our devices operate at broad (1-500 ppb) range and fast (?1 s) response times. Cd2+ is selectively detected because of preferential, size-driven adsorption at the interstitials between l-cysteine functional groups, combined with pH-controlled charge transfer that removes electronic gap states from MoS2. MoS2-Cys-based chemiresistors can be deployed in-line to detect metal ions without any need for additional offline measurements.

| S-EPMC6964307 | biostudies-literature

Chemical sensing in two dimensional porous covalent organic nanosheets.

Project description:Two new imide-based crystalline, porous, and chemically stable covalent organic frameworks (COFs) (TpBDH and TfpBDH) have been successfully synthesized employing solvothermal crystallization route. Furthermore, thin layered covalent organic nanosheets (CONs) were derived from these bulk COFs by the simple liquid phase exfoliation method. These 2D CONs showcase increased luminescence intensity compared to their bulk counterparts (COFs). Notably, TfpBDH-CONs showcase good selectivity and prominent, direct visual detection towards different nitroaromatic analytes over TpBDH-CONs. Quite interestingly, TfpBDH-CONs exhibit a superior "turn-on" detection capability for 2,4,6-trinitrophenol (TNP) in the solid state, but conversely, they also show a "turn-off" detection in the dispersion state. These findings describe a new approach towards developing an efficient, promising fluorescence chemosensor material for both visual and spectroscopic detection of nitroaromatic compounds with very low [10-5 (M)] analyte concentrations.

| S-EPMC5707461 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data