Dataset Information

Polymethylmethacrylate distribution is associated with recompression after vertebroplasty or kyphoplasty for osteoporotic vertebral compression fractures: A retrospective study.

ABSTRACT:

Background

Osteoporotic vertebral compression fracture, always accompanied with pain and height loss of vertebral body, has a significant negative impact on life quality of patients. Vertebroplasty or kyphoplasty is minimal invasive techniques to reconstruct the vertebral height and prevent further collapse of the fractured vertebrae by injecting polymethylmethacrylate into vertebral body. However, recompression of polymethylmethacrylate augmented vertebrae with significant vertebral height loss and aggressive local kyphotic was observed frequently after VP or KP. The purpose of this study was to investigate the effect of polymethylmethacrylate distribution on recompression of the vertebral body after vertebroplasty or kyphoplasty surgery for osteoporotic vertebral compression fracture.

Methods

A total of 281 patients who were diagnosed with vertebral compression fracture (T5-L5) from June 2014 to June 2016 and underwent vertebroplasty or kyphoplasty by polymethylmethacrylate were retrospectively analyzed. The X-ray films at 1 day and 12 months after surgery were compared to evaluate the recompression of operated vertebral body. Patients were divided into those without recompression (non-recompression group) and those with recompression (recompression group). Polymethylmethacrylate distribution pattern, including location and relationship to endplates, was compared between the two groups by lateral X-ray film. Multivariate logistic regression analysis was performed to assess the potential risk factors associated with polymethylmethacrylate distribution for recompression.

Results

One hundred and six (37.7%) patients experienced recompression after surgery during the follow-up period. The polymethylmethacrylate distributed in the middle of vertebral body showed significant differences between two groups. In non-recompression group, the polymethylmethacrylate in the middle portion of vertebral body were closer to endplates than that in the recompression group (upper: t = 31.41, p<0.001; lower: t = 12.19, p<0.001). The higher percentage of the height of polymethylmethacrylate in the middle portion of vertebral body indicates the lower risk of recompression (odds ratio [OR]<0.01, p<0.001). The recompression group and non-recompression group showed significant difference in "contacted" polymethylmethacrylate distribution pattern (polymethylmethacrylate contacted to the both upper/lower endplates) (?2 = 66.23, p<0.001). The vertebra with a "contacted" polymethylmethacrylate distribution pattern has lower risk of recompression (OR = 0.09, p<0.001).

Conclusions

Either more polymethylmethacrylate in the middle portion of vertebral body or "contacted" polymethylmethacrylate distribution pattern had a significantly less incidence of recompression. The findings indicated that the control of polymethylmethacrylate distribution during surgery may reduce the risks of recompression after vertebroplasty or kyphoplasty.

SUBMITTER: Hou Y

PROVIDER: S-EPMC5983445 | biostudies-literature | 2018

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Polymethylmethacrylate distribution is associated with recompression after vertebroplasty or kyphoplasty for osteoporotic vertebral compression fractures: A retrospective study.

Hou Yu Y Yao Qi Q Zhang Genai G Ding Lixiang L Huang Hui H

PloS one 20180601 6

<h4>Background</h4>Osteoporotic vertebral compression fracture, always accompanied with pain and height loss of vertebral body, has a significant negative impact on life quality of patients. Vertebroplasty or kyphoplasty is minimal invasive techniques to reconstruct the vertebral height and prevent further collapse of the fractured vertebrae by injecting polymethylmethacrylate into vertebral body. However, recompression of polymethylmethacrylate augmented vertebrae with significant vertebral hei ...[more]

PMID: 29856859

Similar Datasets

Project description:BackgroundOsteoporotic vertebral compression fractures (OVCF) is a common and often debilitating complication of osteoporosis, leading to significant morbidity and increased mortality. Percutaneous vertebroplasty (PVP) and Percutaneous kyphoplasty (PKP) are recommendable surgical treatments for OVCF.ObjectiveTo evaluate PVP/PKP utilisation and their related direct medical costs for OVCF treatment in China from the payer perspective.MethodsA population-based medical claims database of a metropolitan city in China was analysed from the payer perspective, which included all inpatient claims from 01/01/2015 to 31/12/2017. All vertebral fractures patients that met the eligibility criteria (aged ≥50 years old, having vertebral fracture diagnosis, without unrelated diseases diagnoses such as tumour and scoliosis, received PVP/PKP) were deemed as OVCF patients. Baseline characteristics, surgery rate, length of stay in hospital, time to re-surgery, and costs (including costs per hospitalisation and annual costs) were described. Survival analysis function was used to estimate the re-surgery rate.ResultsOf the 50,686 patients with OVCF identified, 14,527 (28.66%) received a total number of 15,599 records of PVP/PKP surgeries from 2015 to 2017. Mean age was 75 at the first surgery captured in the database analysis period; females accounted for 79.54% of all cases. The median length of surgery stay was 9 days. Cumulative re-surgery rates were 1.22% in 30 days, 2.58% in 90 days, 3.61% in 183 days, 5.42% in 1 year, and 7.95% in 2 years. There was no significant difference in re-surgery rate between PVP and PKP (p = 0.3897). The median time to the re-surgery was 139 days. Mean costs per PVP/PKP-related hospitalisation were 35,906 CNY/5122 USD (34,195 CNY/4878USD for PVP, 44,414 CNY/6336 USD for PKP, p < 0.01). The overall costs of hospitalisation averaged 186.61 million CNY (26.62 million USD) per year in this metropolitan city.ConclusionFrom 2015 to 2017, nearly one-third of OVCF inpatients received PVP/PKP and the re-surgery rate was 7.95%. PVP/PKP procedures for OVCF place a high economic burden for both the healthcare system and patients. Early detection and treatment of patients with osteoporosis are critical in China.

Project description:This retrospective analysis of insurance claims evaluated real-world trends in prescription fills among patients treated with balloon kyphoplasty (N = 6,656) or vertebroplasty (N = 2,189) following diagnosis of vertebral compression fracture. Among those with evidence of opioid use, nearly half of patients discontinued or reduced prescription fills relative to pre-operative levels.IntroductionVertebral compression fractures (VCF) are associated with debilitating pain, spinal misalignment, increased mortality, and increased healthcare-resource utilization in elderly patients. This study evaluated the effect of balloon kyphoplasty (BKP) or vertebroplasty (VP) on post-procedure opioid prescription fills and payer costs in patients with VCF.MethodsThis was a retrospective analysis of a large, nationally representative insurance-claims database. Clinical characteristics, opioid prescription patterns, and payer costs for subjects who underwent either BKP or VP to treat VCF were evaluated beginning 6 months prior to surgery through 7-month follow-up that included a 30-day, postoperative medication washout. Patient demographics, changes in opioid utilization, and payer costs were analyzed.ResultsA total of 8,845 patients met eligibility criteria (75.3% BKP and 24.7% VP) with a mean of age 77 and 74% female. Among the 75% of patients who used opioids, 48.7% of patients discontinued opioid medication and 8.4% reduced prescription fills versus preoperative baseline. Patients who reduced or discontinued prescriptions exhibited a decrease in all-cause payer costs relative to pre-intervention levels, which was a significantly greater change relative to patients with no change, increase, or new start of opioids.ConclusionsInterventional treatment for VCF was associated with decreased or discontinued opioid prescription fills and reduced payer costs in follow-up in a significant proportion of the study population. Reduction of opioid-based harms may represent a previously unrecognized benefit of vertebral augmentation for VCF, especially in this elderly and medically fragile population.

Project description:Kyphoplasty (KP) is an effective method for treating osteoporotic vertebral compression fractures (OVCFs). Although the bipedicular approach is considered the main treatment approach, the unipedicular approach has also been shown to be effective. This study aimed to retrospectively compare the radiological and clinical outcomes of unipedicular and bipedicular KP in the treatment of single-level OVCFs.In total, 96 patients with single-level OVCF who received KP were divided into 2 groups: the unipedicular group, in which 28 patients underwent KP via the unipedicular approach, and the bipedicular group, in which 68 patients underwent KP via the bipedicular approach. Clinical results, radiological findings, and complications were compared between the groups. The clinical results were evaluated for up to 1 year after surgery using a numerical rating scale score. The radiological findings were compared in terms of recovery of the lowest vertebral body height at the same location on radiographs taken both 1 day and 1 year after surgery. The degrees of recovery of the kyphotic angle (KA) were simultaneously compared. The surgical time, amount of cement used, and any postoperative complications were also compared.Both groups showed significant improvements in all clinical and radiological parameters until 1 year after surgery. The unipedicular group required significantly lower amounts of cement than the bipedicular group (unipedicular: 4.4 ± 0.8 mL, bipedicular: 5.6 ± 1.0 mL, P = .00), but there were no significant differences in the clinical and radiological results for up to 1 year after surgery. There were no significant differences in leakage of intradiscal cement, appearance of adjacent vertebral compression fractures within 1 year of surgery, and surgical time.Unipedicular and bipedicular KP significantly reduced the pain experienced by patients with single-level OVCF, restored vertebral height, and corrected the KA, which remained stable for at least 1 year after treatment. Unipedicular KP required lower amounts of cement than bipedicular KP and was as effective as bipedicular KP in terms of radiological and clinical outcomes. The results of this study have level three evidence and grade B recommendation.

Project description:Study Design A biomechanical and radiographic study using vertebral analogues. Objectives Kyphoplasty and vertebroplasty are widely used techniques to alleviate pain in fractures secondary to osteoporosis. However, cement leakage toward vital structures like the spinal cord can be a major source of morbidity and even mortality. We define safe cement injection as the volume of the cement injected into a vertebra before the cement leakage occurs. Our objective is to compare the amount of cement that can be safely injected into an osteoporotic vertebra with simulated compression fracture using either vertebroplasty or balloon kyphoplasty techniques. Methods Forty artificial vertebral analogues made of polyurethane with osteoporotic cancellous matrix representing the L3 vertebrae were used for this study and were divided into four groups of 10 vertebrae each. The four groups tested were: low-viscosity cement injected using vertebroplasty, high-viscosity cement injected using vertebroplasty, low-viscosity cement injected using balloon kyphoplasty, and high-viscosity cement injected using balloon kyphoplasty. The procedures were performed under fluoroscopic guidance. The injection was stopped when the cement started protruding from the created vascular channel in the osteoporotic vertebral fracture model. The main outcome measured was the volume of the cement injected safely into a vertebra before leakage through the posterior vascular channel. Results The highest volume of the cement injected was in the vertebroplasty group using high-viscosity cement, which was almost twice the injected volume in the other three groups. One-way analysis of variance comparing the four groups showed a statistically significant difference (p < 0.005). Conclusions High-viscosity cement injected using vertebroplasty delivers more cement volume before cement leakage and fills the vertebral body more uniformly when compared with balloon kyphoplasty in osteoporotic vertebrae with compression fractures.

Dataset Information

Polymethylmethacrylate distribution is associated with recompression after vertebroplasty or kyphoplasty for osteoporotic vertebral compression fractures: A retrospective study.

Background

Methods

Results

Conclusions

Publications

Polymethylmethacrylate distribution is associated with recompression after vertebroplasty or kyphoplasty for osteoporotic vertebral compression fractures: A retrospective study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets