Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Highly efficient removal of ammonia nitrogen from wastewater by dielectrophoresis-enhanced adsorption.

ABSTRACT: A new approach, based on dielectrophoresis (DEP), was developed in this work to enhance traditional adsorption for the removal of ammonia nitrogen (NH₃-N) from wastewater. The factors that affected the removal efficiency were systematically investigated, which allowed us to determine optimal operation parameters. With this new method we found that the removal efficiency was significantly improved from 66.7% by adsorption only to 95% by adsorption-DEP using titanium metal mesh as electrodes of the DEP and zeolite as the absorbent material. In addition, the dosage of the absorbent/zeolite and the processing time needed for the removal were greatly reduced after the introduction of DEP into the process. In addition, a very low discharge concentration (C, 1.5 mg/L) of NH₃-N was achieved by the new method, which well met the discharge criterion of C < 8 mg/L (the emission standard of pollutants for rare earth industry in China).

SUBMITTER: Liu D

PROVIDER: S-EPMC6005170 | biostudies-literature | 2018

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Highly efficient removal of ammonia nitrogen from wastewater by dielectrophoresis-enhanced adsorption.

Liu Dongyang D Cui Chenyang C Wu Yanhong Y Chen Huiying H Geng Junfeng J Xia Jianxin J

PeerJ 20180615

A new approach, based on dielectrophoresis (DEP), was developed in this work to enhance traditional adsorption for the removal of ammonia nitrogen (NH3-N) from wastewater. The factors that affected the removal efficiency were systematically investigated, which allowed us to determine optimal operation parameters. With this new method we found that the removal efficiency was significantly improved from 66.7% by adsorption only to 95% by adsorption-DEP using titanium metal mesh as elect ...[more]

PMID: 29922513

Similar Datasets

Highly Efficient Removal of Nitrate and Phosphate to Control Eutrophication by the Dielectrophoresis-Assisted Adsorption Method.

Project description:The removal of excessive amounts of nitrate and phosphate from water sources, especially agricultural wastewater, has been of high significance to control eutrophication in aquatic systems. Here, a new method is reported for the removal of nitrate and phosphate simultaneously from wastewater based on the combination of the solution-phased adsorption (ADS) and dielectrophoresis (DEP) techniques. The plant ash was first selected as the adsorbent by screening tests, followed by a systematic investigation of using the adsorbent to remove nitrate and phosphate from wastewater under various experimental conditions, including the testing of adsorbent dosage, pretreatment time, water flow rate, and electrode voltage. The analysis of the adsorbent particles was also performed by scanning electron microscope (SEM) analysis, the energy dispersive X-ray spectroscopy (EDX) test, and the measurement of Zeta potentials. Compared with the ADS method alone, the introduction of DEP into the purification process has greatly increased the removal rate by 66.06% for nitrate and 43.04% for phosphate, respectively. In the meantime, it is observed that the processing time has been greatly reduced by 92% with the assistance of DEP.

| S-EPMC8835578 | biostudies-literature

Enhanced nitrogen removal via Yarrowia lipolytica-mediated nitrogen and related metabolism of Chlorella pyrenoidosa from wastewater

Project description:To investigate the mechanism by which the microalgae-yeast co-culture system promotes wastewater denitrification. We concluded that microalgae and yeast exhibit a mutually beneficial relationship in the co-culture system. Microalgae nitrogen metabolism can be influenced by both miRNA and mRNA, and the presence of yeast stimulates gene expression in microalgae.

2023-07-12 | GSE231399 | GEO

Active nitrogen sites on nitrogen doped carbon for highly efficient associative ammonia decomposition.

Project description:Nitrogen doped carbon materials have been studied as catalyst support for ammonia decomposition. There are 4 different types of nitrogen environments (graphitic, pyrrolic, pyridinic and nitrogen oxide) on the amorphous support identified. In this paper, we report a 5%Ru on MgCO3 pre-treated nitrogen doped carbon catalyst with high content of edge nitrogen-containing sites which displays an ammonia conversion rate of over 90% at 500°C and WHSV = 30,000 mL gcat -1 h-1. It also gives an impressive hydrogen production rate of 31.3 mmol/(min gcat) with low apparent activation energy of 43 kJ mol-1. Fundamental studies indicate that the distinct average Ru-N4 coordination site on edge regions is responsible for such high catalytic activity. Ammonia is stepwise decomposed via a Ru-N(H)-N(H)-Ru intermediate. This associative mechanism circumvents the direct cleavage of energetic surface nitrogen from metal to form N2 hence lowering the activation barrier for the decomposition over this catalyst.

| S-EPMC11342281 | biostudies-literature

Autotrophic nitrogen removal for decentralized treatment of ammonia-rich industrial textile wastewater: process assessment, stabilization and modelling.

Project description:Digital textile printing (DTP) is a game-changer technology that is rapidly expanding worldwide. On the other hand, process wastewater is rich in ammoniacal and organic nitrogen, resulting in relevant issues for discharge into sewer system and treatment in centralized plants. The present research is focused on the assessment of the partial nitritation/anammox process in a single-stage granular sequencing batch reactor for on-site decentralized treatment. The technical feasibility of the process was assessed by treating wastewater from five DTP industries in a laboratory-scale reactor, in one case investigating long-term process stabilization. While experimental results indicated nitrogen removal efficiencies up to about 70%, complying with regulations on discharge in sewer system, these data were used as input for process modelling, whose successful parameter calibration was carried out. The model was applied to the simulation of two scenarios: (i) the current situation of a DTP company, in which wastewater is discharged into the sewer system and treated in a centralized plant, (ii) the modified situation in which on-site decentralized treatment for DTP wastewater is implemented. The second scenario resulted in significant improvements, including reduced energy consumption (- 15%), reduced greenhouse gases emission, elimination of external carbon source for completing denitrification at centralized WWTP and reduced sludge production (- 25%).

| S-EPMC8384811 | biostudies-literature

Highly Efficient Photo-/Electrocatalytic Reduction of Nitrogen into Ammonia by Dual-Metal Sites.

Project description:The photo-/electrocatalytic nitrogen reduction reaction (NRR) is an up and coming method for sustainable NH3 production; however, its practical application is impeded by poor Faradaic efficiency originating from the competing hydrogen evolution reaction (HER) and the inert N≡N triple bond activation. In this work, we put forth a method to boost NRR through construction of donor-acceptor couples of dual-metal sites. The synergistic effect of dual active sites can potentially break the metal-based activity benchmark toward efficient NRR. By systematically evaluating the stability, activity, and selectivity of 28 heteronuclear dual-atom catalysts (DACs) of M1M2/g-C3N4 candidates, FeMo/g-C3N4 is screened out as an effective electrocatalyst for NRR with a particularly low limiting potential of -0.23 V for NRR and a rather high potential of -0.79 V for HER. Meanwhile, TiMo/g-C3N4, NiMo/g-C3N4, and MoW/g-C3N4 with suitable band edge positions and visible light absorption can be applied to NRR as photocatalysts. The excellent catalytic activity is attributed to the tunable composition of metal dimers, which play an important role in modulating the binding strength of the target intermediates. This work may pave a new way for the rational design of heteronuclear DACs with high activity and stability for NRR, which may also apply to other reactions.

| S-EPMC7596869 | biostudies-literature

Nitrogen-rich based conjugated microporous polymers for highly efficient adsorption and removal of COVID-19 antiviral drug chloroquine phosphate from environmental waters.

Project description:Chloroquine phosphate (CQP) has been suggested as an important and effective clinical reliever medication for the 2019 coronavirus (COVID-19). Nevertheless, its excessive use will inevitably cause irreparable damage to the entire ecosystem, thereby posing a considerable environmental safety concern. Hence, the development of highly-efficient methods of removing CQP from water pollution sources, e.g., effluents from hospitals and pharmaceutical factories is significant. This study reported the fabrication of novel C-N bond linked conjugated microporous polymers (CMPs) (BPT-DMB-CMP) with multiple nitrogen-rich anchoring sites for the quick and efficient removal of CQP from aqueous solutions. The irreversible covalent C-N bond linked in the internal framework of BPT-DMB-CMP endowed it with good chemical stability and excellent adsorbent regeneration. With its predesigned functional groups (i.e., rich N-H bonds, triazine rings, and benzene rings) and large area surface (1,019.89 m2·g-1), BPT-DMB-CMP demonstrated rapid adsorption kinetics (25 min) and an extraordinary adsorption capacity (334.70 mg·g-1) for CQP, which is relatively higher than that of other adsorbents. The adsorption behavior of CQP on BPT-DMB-CMP corresponded with Liu model and mixed-order model. Based on the density functional theory (DFT) calculations, X-ray photoelectron spectroscopy (XPS), and adsorption comparisons test, the halogen bonding, and hydrogen bonding cooperates with π - π, C - H···π interactions and size-matching effect in the CQP adsorption system on BPT-DMB-CMP. The excellent practicability for the removal of CQP from real wastewater samples verified the prospect of practical application of BPT-DMB-CMP. BPT-DMB-CMP exhibited the application potentials for the adsorption of other antiviral drugs. This work opens up an efficient, simple, and high adsorption capacity way for removal CQP.

| S-EPMC9624067 | biostudies-literature

Biological nitrogen removal from low carbon wastewater

Project description:Nitrogen has traditionally been removed from wastewater by nitrification and denitrification processes, in which organic carbon has been used as an electron donor during denitrification. However, some wastewaters contain low concentrations of organic carbon, which may require external organic carbon supply, increasing treatment costs. As a result, processes such as partial nitrification/anammox (anaerobic ammonium oxidation) (PN/A), autotrophic denitrification, nitritation-denitritation and bioelectrochemical processes have been studied as possible alternatives, and are thus evaluated in this study based on process kinetics, applicability at large-scale and process configuration. Oxygen demand for nitritation-denitritation and PN/A is 25% and 60% lower than for nitrification/denitrification, respectively. In addition, PN/A process does not require organic carbon supply, while its supply for nitritation-denitritation is 40% less than for nitrification/denitrification. Both PN/A and nitritation-denitritation produce less sludge compared to nitrification/denitrification, which saves on sludge handling costs. Similarly, autotrophic denitrification generates less sludge compared to heterotrophic denitrification and could save on sludge handling costs. However, autotrophic denitrification driven by metallic ions, elemental sulfur (S) and its compounds could generate harmful chemicals. On the other hand, hydrogenotrophic denitrification can remove nitrogen completely without generation of harmful chemicals, but requires specialized equipment for generation and handling of hydrogen gas (H2), which complicates process configuration. Bioelectrochemical processes are limited by low kinetics and complicated process configuration. In sum, anammox-mediated processes represent the best alternative to nitrification/denitrification for nitrogen removal in low- and high-strength wastewaters.

| S-EPMC9709150 | biostudies-literature

Enhanced nitrogen removal via Yarrowia lipolytica-mediated nitrogen and related metabolism of Chlorella pyrenoidosa from wastewater.

Project description:We investigated the optimum co-culture ratio with the highest biological nitrogen removal rate, revealing that chemical oxygen demand, total nitrogen (TN), and ammoniacal nitrogen (NH3-N) removal was increased in the Chlorella pyrenoidosa and Yarrowia lipolytica co-culture system at a 3:1 ratio. Compared with the control, TN and NH3-N content in the co-incubated system was decreased within 2-6 days. We investigated mRNA/microRNA (miRNA) expression in the C. pyrenoidosa and Y. lipolytica co-culture after 3 and 5 days, identifying 9885 and 3976 differentially expressed genes (DEGs), respectively. Sixty-five DEGs were associated with Y. lipolytica nitrogen, amino acid, photosynthetic, and carbon metabolism after 3 days. Eleven differentially expressed miRNAs were discovered after 3 days, of which two were differentially expressed and their target mRNA expressions negatively correlated with each other. One of these miRNAs regulates gene expression of cysteine dioxygenase, hypothetical protein, and histone-lysine N-methyltransferase SETD1, thereby reducing amino acid metabolic capacity; the other miRNA may promote upregulation of genes encoding the ATP-binding cassette, subfamily C (CFTR/MRP), member 10 (ABCC10), thereby promoting nitrogen and carbon transport in C. pyrenoidosa. These miRNAs may further contribute to the activation of target mRNAs. miRNA/mRNA expression profiles confirmed the synergistic effects of a co-culture system on pollutant disposal.

| S-EPMC10325826 | biostudies-literature

Highly efficient removal of thallium(I) by facilely fabricated amorphous titanium dioxide from water and wastewater.

Project description:In this study, amorphous hydrous titanium dioxide was synthesized by a facile precipitation method at room temperature, aiming to effectively remove thallium(I) from water. The titanium dioxide prepared using ammonia as precipitant (TiO2I) is more effective for thallium(I) uptake than the one synthesized with sodium hydroxide (TiO2II). The TiO2 obtained particles are amorphous, aggregates of many nanoparticles and irregular in shape. The thallium(I) uptake increases with the rise of solution pH value. Under neutral pH conditions, the maximal thallium(I) adsorption capacities of TiO2I and TiO2II are 302.6 and 230.3 mg/g, respectively, outperforming most of the reported adsorbents. The amorphous TiO2 has high selectivity towards thallium(I) in the presence of multiple cations such as K+, Ca2+, Mg2+, Zn2+ and Ni2+. Moreover, the TiO2I is efficient in removing thallium(I) from real river water and mining wastewater. Additionally, the spent TiO2I can be regenerated using hydrochloric acid solution and reused. The Tl(I) adsorption is achieved via replacing the H+ in hydroxyl group on the surface of TiO2 and forming inner-sphere surface complexes. Owing to its high efficiency, facile synthesis and environmental friendliness, the TiO2I has the potential to be used as an alternative adsorbent to remove Tl(I) from water.

| S-EPMC8741997 | biostudies-literature

Highly efficient removal of lead and cadmium during wastewater irrigation using a polyethylenimine-grafted gelatin sponge.

Project description:Wastewater irrigation is a very important resource for heavy metal pollution in soil and then accumulation in vegetable crops. In this study, a polyethylenimine (PEI)-grafted gelatin sponge was prepared to effectively adsorb heavy metals during wastewater irrigation. Based on the strong water adsorption ability, wastewater remained in the PEI-grafted gelatin sponge for a sufficient time for the heavy metals to interact with the sorbents. The binding capacities of Pb(II) ions and Cd(II) ions on the PEI-grafted gelatin sponge were 66 mg g(-1) and 65 mg g(-1), which were much more than those on the gelatin sponge (9.75 mg g(-1) and 9.35 mg g(-1)). Subsequently, the PEI-grafted gelatin sponge was spread on the surface of soil planted with garlic and then sprayed with synthetic wastewater. The concentrations of cadmium and lead in the garlic leaves were 1.59 mg kg(-1) and 5.69 mg kg(-1), respectively, which were much lower than those (15.78 mg kg(-1) and 27.98 mg kg(-1)) without the gelatin sponge, and the removal efficiencies were 89.9% and 79.7%. The PEI-grafting gelatin sponge could effectively remove heavy metals during wastewater irrigation, which improved the soil environment and reduced human exposure to heavy metals.

| S-EPMC5025662 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data