Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Opto-thermally excited multimode parametric resonance in graphene membranes.

ABSTRACT: In the field of nanomechanics, parametric excitations are of interest since they can greatly enhance sensing capabilities and eliminate cross-talk. Above a certain threshold of the parametric pump, the mechanical resonator can be brought into parametric resonance. Here we demonstrate parametric resonance of suspended single-layer graphene membranes by an efficient opto-thermal drive that modulates the intrinsic spring constant. With a large amplitude of the optical drive, a record number of 14 mechanical modes can be brought into parametric resonance by modulating a single parameter: the pre-tension. A detailed analysis of the parametric resonance allows us to study nonlinear dynamics and the loss tangent of graphene resonators. It is found that nonlinear damping, of the van der Pol type, is essential to describe the high amplitude parametric resonance response in atomically thin membranes.

SUBMITTER: Dolleman RJ

PROVIDER: S-EPMC6008417 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Opto-thermally excited multimode parametric resonance in graphene membranes.

Dolleman Robin J RJ Houri Samer S Chandrashekar Abhilash A Alijani Farbod F van der Zant Herre S J HSJ Steeneken Peter G PG

Scientific reports 20180619 1

In the field of nanomechanics, parametric excitations are of interest since they can greatly enhance sensing capabilities and eliminate cross-talk. Above a certain threshold of the parametric pump, the mechanical resonator can be brought into parametric resonance. Here we demonstrate parametric resonance of suspended single-layer graphene membranes by an efficient opto-thermal drive that modulates the intrinsic spring constant. With a large amplitude of the optical drive, a record number of 14 m ...[more]

PMID: 29921917

Similar Datasets

A multimode electromechanical parametric resonator array.

Project description:Electromechanical resonators have emerged as a versatile platform in which detectors with unprecedented sensitivities and quantum mechanics in a macroscopic context can be developed. These schemes invariably utilise a single resonator but increasingly the concept of an array of electromechanical resonators is promising a wealth of new possibilities. In spite of this, experimental realisations of such arrays have remained scarce due to the formidable challenges involved in their fabrication. In a variation to this approach, we identify 75 harmonic vibration modes in a single electromechanical resonator of which 7 can also be parametrically excited. The parametrically resonating modes exhibit vibrations with only 2 oscillation phases which are used to build a binary information array. We exploit this array to execute a mechanical byte memory, a shift-register and a controlled-NOT gate thus vividly illustrating the availability and functionality of an electromechanical resonator array by simply utilising higher order vibration modes.

| S-EPMC3963032 | biostudies-literature

Tuning nonlinear damping in graphene nanoresonators by parametric-direct internal resonance.

Project description:Mechanical sources of nonlinear damping play a central role in modern physics, from solid-state physics to thermodynamics. The microscopic theory of mechanical dissipation suggests that nonlinear damping of a resonant mode can be strongly enhanced when it is coupled to a vibration mode that is close to twice its resonance frequency. To date, no experimental evidence of this enhancement has been realized. In this letter, we experimentally show that nanoresonators driven into parametric-direct internal resonance provide supporting evidence for the microscopic theory of nonlinear dissipation. By regulating the drive level, we tune the parametric resonance of a graphene nanodrum over a range of 40-70 MHz to reach successive two-to-one internal resonances, leading to a nearly two-fold increase of the nonlinear damping. Our study opens up a route towards utilizing modal interactions and parametric resonance to realize resonators with engineered nonlinear dissipation over wide frequency range.

| S-EPMC7889630 | biostudies-literature

Excited State Dynamics of Thermally Activated Delayed Fluorescence from an Excited State Intramolecular Proton Transfer System.

Project description:We describe the photophysical processes that give rise to thermally activated delayed fluorescence in the excited state intramolecular proton transfer (ESIPT) molecule, triquinolonobenzene (TQB). Using transient absorption and time-resolved photoluminescence spectroscopy, we fully characterize prompt and delayed emission, phosphorescence, and oxygen quenching to reveal the reverse intersystem crossing mechanism (rISC). After photoexcitation and rapid ESIPT to the TQB-TB tautomer, emission from S1 is found to compete with thermally activated ISC to an upper triplet state, T2, very close in energy to S1 and limiting photoluminescence quantum yield. T2 slowly decays to the lowest triplet state, T1, via internal conversion. In the presence of oxygen, T2 is quenched to the ground state of the double proton transferred TQB-TC tautomer. Our measurements demonstrate that rISC in TQB occurs from T2 to S1 driven by thermally activated reverse internal conversion from T1 to T2 and support recent calculations by Cao et al. (Cao, Y.; Eng, J.; Penfold, T. J. Excited State Intramolecular Proton Transfer Dynamics for Triplet Harvesting in Organic Molecules. J. Phys. Chem. A 2019, 123, 2640-2649).

| S-EPMC7304890 | biostudies-literature

Frequency-Selective Anharmonic Mode Analysis of Thermally Excited Vibrations in Proteins.

Project description:Low-frequency molecular vibrations at far-infrared frequencies are thermally excited at room temperature. As a consequence, thermal fluctuations are not limited to the immediate vicinity of local minima on the potential energy surface, and anharmonic properties cannot be ignored. The latter is particularly relevant in molecules with multiple conformations, such as proteins and other biomolecules. However, existing theoretical and computational frameworks for the analysis of molecular vibrations have so far been limited by harmonic or quasi-harmonic approximations, which are ill-suited to describe anharmonic low-frequency vibrations. Here, we introduce a fully anharmonic analysis of molecular vibrations based on a time correlation formalism that eliminates the need for harmonic or quasi-harmonic approximations. We use molecular dynamics simulations of a small protein to demonstrate that this new approach, in contrast to harmonic and quasi-harmonic normal modes, correctly identifies the collective degrees of freedom associated with molecular vibrations at any given frequency. This allows us to unambiguously characterize the anharmonic character of low-frequency vibrations in the far-infrared spectrum.

| S-EPMC10624555 | biostudies-literature

Tight-binding model for opto-electronic properties of penta-graphene nanostructures.

Project description:We present a tight-binding parametrization for penta-graphene that correctly describes its electronic band structure and linear optical response. The set of parameters is validated by comparing to ab-initio density functional theory calculations for single-layer penta-graphene, showing a very good global agreement. We apply this parameterization to penta-graphene nanoribbons, achieving an adequate description of quantum-size effects. Additionally, a symmetry-based analysis of the energy band structure and the optical transitions involved in the absorption spectra is introduced, allowing for the interpretation of the optoelectronic features of these systems.

| S-EPMC6056545 | biostudies-literature

Excited-State Modulation in Donor-Substituted Multiresonant Thermally Activated Delayed Fluorescence Emitters.

Project description:Strategies to tune the emission of multiresonant thermally activated delayed fluorescence (MR-TADF) emitters remain rare. Here, we explore the effect of donor substitution about a MR-TADF core on the emission energy and the nature of the excited state. We decorate different numbers and types of electron-donors about a central MR-TADF core, DiKTa. Depending on the identity and number of donor groups, the excited state either remains short-range charge transfer (SRCT) and thus characteristic of an MR-TADF emitter or becomes a long-range charge transfer (LRCT) that is typically observed in donor-acceptor TADF emitters. The impact is that in three examples that emit from a SRCT state, Cz-DiKTa, Cz-Ph-DiKTa, and 3Cz-DiKTa, the emission remains narrow, while in four examples that emit via a LRCT state, TMCz-DiKTa, DMAC-DiKTa, 3TMCz-DiKTa, and 3DMAC-DiKTa, the emission broadens significantly. Through this strategy, the organic light-emitting diodes fabricated with the three MR-TADF emitters show maximum electroluminescence emission wavelengths, λEL, of 511, 492, and 547 nm with moderate full width at half-maxima (fwhm) of 62, 61, and 54 nm, respectively. Importantly, each of these devices show high maximum external quantum efficiencies (EQEmax) of 24.4, 23.0, and 24.4%, which are among the highest reported with ketone-based MR-TADF emitters. OLEDs with D-A type emitters, DMAC-DiKTa and TMCz-DiKTa, also show high efficiencies, with EQEmax of 23.8 and 20.2%, but accompanied by broad emission at λEL of 549 and 527 nm, respectively. Notably, the DMAC-DiKTa-based OLED shows very small efficiency roll-off, and its EQE remains 18.5% at 1000 cd m-2. Therefore, this work demonstrates that manipulating the nature and numbers of donor groups decorating a central MR-TADF core is a promising strategy for both red-shifting the emission and improving the performance of the OLEDs.

| S-EPMC9121343 | biostudies-literature

Optoacoustic tweezers: a programmable, localized cell concentrator based on opto-thermally generated, acoustically activated, surface bubbles.

Project description:We present a programmable, biocompatible technique for dynamically concentrating and patterning particles and cells in a microfluidic device. Since our technique utilizes opto-thermally generated, acoustically activated, surface bubbles, we name it "optoacoustic tweezers". The optoacoustic tweezers are capable of concentrating particles/cells at any prescribed locations in a microfluidic chamber without the use of permanent structures, rendering it particularly useful for the formation of flexible, complex cell patterns. Additionally, this technique has demonstrated excellent biocompatibility and can be conveniently integrated with other microfluidic units. In our experiments, micro-bubbles were generated by focusing a 405 nm diode laser onto a gold-coated glass chamber. By properly tuning the laser, we demonstrate precise control over the position and size of the generated bubbles. Acoustic waves were then applied to activate the surface bubbles, causing them to oscillate at an optimized frequency. The resulting acoustic radiation force allowed us to locally trap particles/cells, including 15 ?m polystyrene beads and HeLa cells, around each bubble. Cell-adhesion tests were also conducted after cell concentrating to confirm the biocompatibility of this technique.

| S-EPMC3988908 | biostudies-literature

Chemical-Vapor-Deposited Graphene as a Thermally Conducting Coating.

Project description:We performed scanning thermal microscopy measurements on single layers of chemical-vapor-deposited (CVD) graphene supported by different substrates, namely, SiO2, Al2O3, and PET using a double-scan technique to remove the contribution to the heat flux through the air and the cantilever. Then, by adopting a simple lumped-elements model, we developed a new method that allows determining, through a multistep numerical analysis, the equivalent thermal properties of thermally conductive coatings of nanometric thickness. In this specific case we found that our CVD graphene is "thermally equivalent", for heat injection perpendicular to the graphene planes, to a coating material of conductivity k eff = 2.5 ± 0.3 W/m K and thickness t eff = 3.5 ± 0.3 nm in perfect contact with the substrate. For the SiO2 substrate, we also measured stacks made of 2- and 4-CVD monolayers, and we found that the effective thermal conductivity increases with increasing number of layers and, with a technologically achievable number of layers, is expected to be comparable to that of 1 order of magnitude-thicker metallic thin films. This study provides a powerful method for characterizing the thermal properties of graphene in view of several thermal management applications.

| S-EPMC6541428 | biostudies-literature

Thermally reduced kaolin-graphene oxide nanocomposites for gas sensing.

Project description:Highly sensitive graphene-based gas sensors can be made using large-area single layer graphene, but the cost of large-area pure graphene is high, making the simpler reduced graphene oxide (rGO) an attractive alternative. To use rGO for gas sensing, however, require a high active surface area and slightly different approach is needed. Here, we report on a simple method to produce kaolin-graphene oxide (GO) nanocomposites and an application of this nanocomposite as a gas sensor. The nanocomposite was made by binding the GO flakes to kaolin with the help of 3-Aminopropyltriethoxysilane (APTES). The GO flakes in the nanocomposite were contacting neighboring GO flakes as observed by electron microscopy. After thermal annealing, the nanocomposite become conductive as showed by sheet resistance measurements. Based on the conductance changes of the nanocomposite films, electrical gas sensing devices were made for detecting NH3 and HNO3. These devices had a higher sensitivity than thermally annealed multilayer GO films. This kaolin-GO nanocomposite might be useful in applications that require a low-cost material with large conductive surface area including the demonstrated gas sensors.

| S-EPMC5378989 | biostudies-literature

Ultralight, Ultraflexible, Anisotropic, Highly Thermally Conductive Graphene Aerogel Films.

Project description:Graphene aerogels have attracted much attention as a promising material for various applications. The unusually high intrinsic thermal conductivity of individual graphene sheets makes an obvious contrast with the thermal insulating performance of assembled 3D graphene materials. We report the preparation of anisotropy 3D graphene aerogel films (GAFs) made from tightly packed graphene films using a thermal expansion method. GAFs with different thicknesses and an ultimate low density of 4.19 mg cm-3 were obtained. GAFs show high anisotropy on average cross-plane thermal conductivity (K⊥) and average in-plane thermal conductivity (K||). Additionally, uniaxially compressed GAFs performed a large elongation of 11.76% due to the Z-shape folding of graphene layers. Our results reveal the ultralight, ultraflexible, highly thermally conductive, anisotropy GAFs, as well as the fundamental evolution of macroscopic assembled graphene materials at elevated temperature.

| S-EPMC8623857 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data