Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Identification of Tobacco Types and Cigarette Brands Using an Electronic Nose Based on Conductive Polymer/Porphyrin Composite Sensors.

ABSTRACT: Three tobacco types (Burley, Flue Cured, and Oriental) and eight cigarette brands were unequivocally identified using an electronic nose formed by only three sensors based on a single novel conducting polymer (PF-BTB) doped with different porphyrins (H2TPP, H2TPFP, and H2BTBOP). The synthesis and characterization of the polymer are also discussed. Small changes in the porphyrin structure caused significant changes in the electrical conductance response patterns of the sensors upon exposure to complex chemical matrixes, representing a novel approach for tuning the selectivity of chemiresistive sensors for e-nose application. This e-nose is fast, cheap, reliable, can be easily operated, and could be a valuable tool for border agents fighting cigarette smuggling around the world, helping them prevent losses of millions in tax revenues and sales.

SUBMITTER: Esteves CHA

PROVIDER: S-EPMC6044931 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Identification of Tobacco Types and Cigarette Brands Using an Electronic Nose Based on Conductive Polymer/Porphyrin Composite Sensors.

Esteves C Henrique A CHA Iglesias Bernardo A BA Ogawa Takuji T Araki Koiti K Hoehne Lucélia L Gruber Jonas J

ACS omega 20180618 6

Three tobacco types (Burley, Flue Cured, and Oriental) and eight cigarette brands were unequivocally identified using an electronic nose formed by only three sensors based on a single novel conducting polymer (PF-BTB) doped with different porphyrins (H2TPP, H2TPFP, and H2BTBOP). The synthesis and characterization of the polymer are also discussed. Small changes in the porphyrin structure caused ...[more]

PMID: 30023949

Similar Datasets

Stretchable and Conductive Cellulose/Conductive Polymer Composite Films for On-Skin Strain Sensors.

Project description:Conductive composite materials have attracted considerable interest of researchers for application in stretchable sensors for wearable health monitoring. In this study, highly stretchable and conductive composite films based on carboxymethyl cellulose (CMC)-poly (3,4-ethylenedioxythiopehe):poly (styrenesulfonate) (PEDOT:PSS) (CMC-PEDOT:PSS) were fabricated. The composite films achieved excellent electrical and mechanical properties by optimizing the lab-synthesized PEDOT:PSS, dimethyl sulfoxide, and glycerol content in the CMC matrix. The optimized composite film exhibited a small increase of only 1.25-fold in relative resistance under 100% strain. The CMC-PEDOT:PSS composite film exhibited outstanding mechanical properties under cyclic tape attachment/detachment, bending, and stretching/releasing tests. The small changes in the relative resistance of the films under mechanical deformation indicated excellent electrical contacts between the conductive PEDOT:PSS in the CMC matrix, and strong bonding strength between CMC and PEDOT:PSS. We fabricated highly stretchable and conformable on-skin sensors based on conductive and stretchable CMC-PEDOT:PSS composite films, which can sensitively monitor subtle bio-signals and human motions such as respiratory humidity, drinking water, speaking, skin touching, skin wrinkling, and finger bending. Because of the outstanding electrical properties of the films, the on-skin sensors can operate with a low power consumption of only a few microwatts. Our approach paves the way for the realization of low-power-consumption stretchable electronics using highly stretchable CMC-PEDOT:PSS composite films.

| S-EPMC9317044 | biostudies-literature

Development of a Low-Cost Portable Electronic Nose for Cigarette Brands Identification.

Project description:In China, the government and the cigarette industry yearly lose millions in sales and tax revenue because of imitation cigarettes. Usually, visual observation is not enough to identify counterfeiting. An auxiliary analytical method is needed for cigarette brands identification. To this end, we developed a portable, low-cost electronic nose (e-nose) system for brand recognition of cigarettes. A gas sampling device was designed to reduce the influence caused by humidity fluctuation and the volatile organic compounds (VOCs) in the environment. To ensure the uniformity of airflow distribution, the structure of the sensing chamber was optimized by computational fluid dynamics (CFD) simulations. The e-nose system is compact, portable, and lightweight with only 15 cm in side length and the cost of the whole device is less than $100. Results from the machine learning algorithm showed that there were significant differences between 5 kinds of cigarettes we tested. Random Forest (RF) has the best performance with accuracy of 91.67% and K Nearest Neighbor (KNN) has the accuracy of 86.98%, which indicated that the e-nose was able to discriminate samples. We believe this portable, cheap, reliable e-nose system could be used as an auxiliary screen technique for counterfeit cigarettes.

| S-EPMC7435456 | biostudies-literature

A highly porous and conductive composite gate electrode for OTFT sensors.

Project description:Ionic/protonic to electronic transducers based on organic thin film transistors have shown great promise for applications in bioelectronic interface devices and biosensors, and development of materials that exhibit mixed ionic/electronic conduction are an essential part of these devices. In this work, we investigated the proton sensing properties of an all solid-state and low voltage operating organic thin film transistor (OTFT) that uses the organic mixed conductor poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) as the gate electrode. To address the limited sensitivity due to the lack of porosity in PEDOT:PSS base sensors, we proposed a composite gate electrode material composed of PEDOT:PSS and proton conducting mesoporous SO3H-Si-MCM-41 nanoparticles for improved proton sensitivity. The composite gate electrode doubles the proton sensitivity of the OTFT, indicating a clear advantage of adding SO3H-Si-MCM-41 in the PEDOT:PSS gate. Moreover, the OTFTs with the composite gate electrode maintained OTFT characteristics similar to that of the PEDOT:PSS gated OTFT. A detailed and systematic study of the effect of variation in the composition of PEDOT:PSS:SO3H-Si-MCM-41 on OTFT characteristics and sensing properties is carried out. Our results open up the possibility of combining inorganic nanomaterials with organic conductors in the development of highly efficient bioelectronic sensing platforms.

| S-EPMC9061173 | biostudies-literature

Stretchable and Self-Healable Graphene-Polymer Conductive Composite for Wearable EMG Sensor.

Project description:In bioelectronics, stretchable and self-healable electrodes can reliably measure electrophysiological signals from the human body because they have good modulus matching with tissue and high durability. In particular, the polymer-graphene composite has advantages when it is used as an electrode for bioelectronic sensor devices. However, it has previously been reported that external stimuli such as heat or light are required for the self-healing process of polymer/graphene composites. In this study, we optimized a conducting composite by mixing a self-healing polymer (SHP) and graphene. The composite materials can not only self-heal without external stimulation but also have rapid electrical recovery from repeated mechanical damage such as scratches. In addition, they had stable electrical endurance even when the cyclic test was performed over 200 cycles at 50% strain, so they can be useful for a bioelectronic sensor device with high durability. Finally, we measured the electromyogram signals caused by the movement of arm muscles using our composite, and the measured data were transmitted to a microcontroller to successfully control the movement of the robot's hand.

| S-EPMC9505217 | biostudies-literature

Differentiation of Candida albicans Species Complex by Tobacco Agar Obtained from Different Cigarette Brands Available in Colombia.

Project description:Aim:To evaluate the efficacy of different brands of cigarettes in the preparation of tobacco agar, for the differentiation of these related yeasts. Methodology. Tobacco agar was prepared using six brands and four varieties of cigarettes, and 125 clinical isolates previously identified by PCR and Maldi-Tof were used. To determine whether the results of the microbiological tests were associated with similarities in the chemical components of cigarettes, thin-layer chromatography was performed. Results:Candida dubliniensis colonies presented hue differences according to the incubation temperature and the brand or variety of cigarette used, except in the tobacco agar produced with Marlboro Xpress cigarette, where its differentiation was not possible. The chromatograms showed few differences among apolar and medium polarity extract components. Conclusions:Tobacco agar is a low-cost tool used for the differentiation of Candida dubliniensis; however, incubation temperature and cigarette brand affect the performance of the media. No relationship was found between the microbiological results and the chemical similarity of the extracts of the cigarettes by chromatography.

| S-EPMC7114770 | biostudies-literature

Reduction of tobacco smoke components yield in commercial cigarette brands by addition of HUSY, NaY and Al-MCM-41 to the cigarette rod.

Project description:The effect of two zeolites, HUSY, NaY and a mesoporous synthesized Al-MCM-41 material on the smoke composition of ten commercial cigarettes brands has been studied. Cigarettes were prepared by mixing the tobacco with the three powdered materials, and the smoke obtained under the ISO conditions was analyzed. Up to 32 compounds were identified and quantified in the gas fraction and 80 in the total particulate matter (TPM) condensed in the cigarettes filters and in the traps located after the mouth end of the cigarettes. Al-MCM-41 is by far the best additive, providing the highest reductions of the yield for most compounds and brands analyzed. A positive correlation was observed among the TPM and nicotine yields with the reduction obtained in nicotine, CO, and most compounds with the three additives. The amount of ashes in additive free basis increases due to the coke deposited on the solids, especially with Al-MCM-41. Nicotine is reduced with Al-MCM-41 by an average of 34.4% for the brands studied (49.5% for the brand where the major reduction was obtained and 18.5 for the brand behaving the worst). CO is reduced by an average of 18.6% (ranging from 10.3 to 35.2% in the different brands).

| S-EPMC5598513 | biostudies-literature

Smoking patterns in Great Britain: the rise of cheap cigarette brands and roll your own (RYO) tobacco.

Project description:In Britain, the tobacco industry segments cigarettes into four price categories-premium, mid-price, economy and ultra-low-price (ULP). Our previous work shows that tobacco companies have kept ULP prices stable in real terms. Roll your own (RYO) tobacco remains cheaper still.Analysis of 2001-08 General Household Survey data to examine trends in use of these cheap products and, using logistic regression, the profile of users of these products.Among smokers, the proportion using cheap products (economy, ULP and RYO combined) increased significantly in almost all age groups and geographic areas. Increases were most marked in under 24 year olds, 76% of whom smoked cheap cigarettes by 2008. All cheap products were more commonly used in lower socio-economic groups. Men and younger smokers were more likely to smoke RYO while women smoked economy brands. Smokers outside London and the South East of England were more likely to smoke some form of cheap tobacco even once socio-economic differences were accounted for.This paper demonstrates that cheap tobacco use is increasing among young and disadvantaged smokers compromising declines in population smoking prevalence. Thus, tobacco industry pricing appears to play a key role in explaining smoking patterns and inequalities in smoking.

| S-EPMC4340325 | biostudies-other

Conductive Polymer Composites for Hydrogen Sulphide Sensors Working at Sub-PPM Level and Room Temperature.

Project description:Hybrid composites based on tin chloride and the conductive polymers, polyaniline (PAni) and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), were integrated into high-performance hydrogen sulphide (H2S) gas sensors working at room temperature. The morphology and chemical properties were studied by scanning and transmission electron microscopy (SEM, TEM), energy dispersive spectroscopy (EDS) and Fourier-transform infrared (FTIR). The composites demonstrated a slightly porous nanostructure and strong interactions between the polymers and the metal salt, which slightly dopes PAni. The hybrid sensors exhibited a very low detection limit (<85 ppb), fast response, repeatability, reproducibility and stability over one month. Moreover, this work presents how calibration based on the derivative of the signal can give hybrid sensors the ability to quantify the concentration of targeted gas, even during continuous variation of the analyte concentration. Finally, the effect of interfering species, such as water and ammonia, is discussed.

| S-EPMC8512851 | biostudies-literature

Facile Fabrication of Conductive Graphene/Polyurethane Foam Composite and Its Application on Flexible Piezo-Resistive Sensors.

Project description:Flexible pressure sensors have attracted tremendous research interests due to their wide applications in wearable electronics and smart robots. The easy-to-obtain fabrication and stable signal output are meaningful for the practical application of flexible pressure sensors. The graphene/polyurethane foam composites are prepared to develop a convenient method for piezo-resistive devices with simple structure and outstanding sensing performance. Graphene oxide was prepared through the modified Hummers method. Polyurethane foam was kept to soak in the obtained graphene oxide aqueous solution and then dried. After that, reduced graphene oxide/polyurethane composite foam has been fabricated under air phase reduction by hydrazine hydrate vapor. The chemical components and micro morphologies of the prepared samples have been observed by using FT-IR and scanning electron microscopy (SEM). The results predicted that the graphene is tightly adhered to the bare surface of the pores. The pressure sensing performance has been also evaluated by measuring the sensitivity, durability, and response time. The results indicate that the value of sensitivity under the range of 0-6 kPa and 6-25 kPa are 0.17 kPa-1 and 0.005 kPa-1, respectively. Cycling stability test has been performed 30 times under three varying pressures. The signal output just exhibits slight fluctuations, which represents the good cycling stability of the pressure sensor. At the same stage, the response time of loading and unloading of 20 g weight turned out to be about 300 ms. These consequences showed the superiority of graphene/polyurethane composite foam while applied in piezo-resistive devices including wide sensitive pressure range, high sensitivity, outstanding durability, and fast response.

| S-EPMC6722995 | biostudies-literature

Laser-Etched Stretchable Graphene-Polymer Composite Array for Sensitive Strain and Viscosity Sensors.

Project description:The ability to control surface wettability and liquid spreading on textured surfaces is of interest for extensive applications. Soft materials have prominent advantages for producing the smart coatings with multiple functions for strain sensing. Here, we report a simple method to prepare flexible hydrophobic smart coatings using graphene-polymer films. Arrays of individual patterns in the films were created by laser engraving and controlled the contact angle of small drops by pinning the contact lines in a horizontal tensile range of 0-200%. By means of experiments and model, we demonstrate that the ductility of drops is relied on the height-to-spacing ratio of the individual pattern and the intrinsic contact angle. Moreover, the change of drop size was utilized to measure the applied strain and liquid viscosity, enabling a strain sensitivity as high as 1068 μm2/%. The proposed laser-etched stretchable graphene-polymer composite has potential applications in DNA microarrays, biological assays, soft robots, and so on.

| S-EPMC7770859 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data