Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Adjustable white-light emission from a photo-structured micro-OLED array.

ABSTRACT: White organic light-emitting diodes (OLEDs) are promising candidates for future solid-state lighting applications and backplane illumination in large-area displays. One very specific feature of OLEDs, which is currently gaining momentum, is that they can enable tunable white light emission. This feature is conventionally realized either through the vertical stacking of independent OLEDs emitting different colors or in lateral arrangement of OLEDs. The vertical design is optically difficult to optimize and often results in efficiency compromises between the units. In contrast, the lateral concept introduces severe area losses to dark regions between the subunits, which requires a significantly larger overall device area to achieve equal brightness. Here we demonstrate a color-tunable, two-color OLED device realized by side-by-side alignment of yellow and blue p-i-n OLEDs structured down to 20 μm by a simple and up-scalable orthogonal photolithography technique. This layout eliminates the problems of conventional lateral approaches by utilizing all area for light emission. The corresponding emission of the photo-patterned two-unit OLED can be tuned over a wide range from yellow to white to blue colors. The independent control of the different units allows the desired overall spectrum to be set at any given brightness level. Operated as a white light source, the microstructured OLED reaches a luminous efficacy of 13 lm W^-1 at 1000 cd m^-² without an additional light outcoupling enhancement and reaches a color rendering index of 68 when operated near the color point E. Finally, we demonstrate an improved device lifetime by means of size variation of the subunits.

SUBMITTER: Krotkus S

PROVIDER: S-EPMC6059945 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Nitrogen-Free Bifunctional Bianthryl Leads to Stable White-Light Emission in Bilayer and Multilayer OLED Devices.

Project description:White organic light-emitting diodes (WOLEDs) are at the center stage of OLED research today because of their advantages in replacing the high energy-consuming lighting technologies in vogue for a long time. New materials that emit white light in simple devices are much sought after. We have developed two novel electroluminescent materials, referred to as BABZF and BATOMe, based on a twisted bianthryl core, which are brilliantly fluorescent, thermally highly stable with high T d and T g, and exhibit reversible redox property. Although inherently blue emissive, BABZF leads to white-light emission (CIE ≈ 0.28, 0.33) with a moderate power efficiency of 2.24 lm/W and a very high luminance of 15 600 cd/m2 in the fabricated multilayer nondoped OLED device. This device exhibited excellent color stability over a range of applied potential. Remarkably, similar white-light emission was captured even from a double-layer device, attesting to the innate hole-transporting ability of BABZF despite it being non-nitrogenous, that is, lacking any traditional hole-transporting di-/triarylamino group(s). Similar studies with BATOMe led to inferior device performance results, thereby underscoring the importance of dibenzofuryl groups in BABZF. Experimental as well as theoretical studies suggest the possibility of emission from multiple species involving BABZF and its exciplex and electroplex in the devices. The serendipitously observed white-light emission from a double-layer device fabricated with an unconventional hole-transporting material (HTM) opens up new avenues to create new non-nitrogenous HTMs that may lead to more efficient white-light emission in simple double-layer devices.

| S-EPMC6641470 | biostudies-literature

White Light Emission from Vegetable Extracts.

Project description:A mixture of extracts from two common vegetables, red pomegranate and turmeric, when photoexcited at 380 nm, produced almost pure white light emission (WLE) with Commission Internationale d'Eclairage (CIE) chromaticity index (0.35, 0.33) in acidic ethanol. It was also possible to obtain WLE in polyvinyl alcohol film (0.32, 0.25), and in gelatin gel (0.26, 0.33) using the same extract mixture. The colour temperature of the WLE was conveniently tunable by simply adjusting the concentrations of the component emitters. The primary emitting pigments responsible for contributing to WLE were polyphenols and anthocyanins from pomegranate, and curcumin from turmeric. It was observed that a cascade of Forster resonance energy transfer involving polyphenolics, curcumin and anthocyanins played a crucial role in obtaining a CIE index close to pure white light. The optimized methods of extraction of the two primary emitting pigments from their corresponding plant sources are simple, cheap and fairly green.

| S-EPMC4470329 | biostudies-literature

Emission and Color Tuning of Cyanostilbenes and White Light Emission.

Project description:White-light-emitting diodes are energy efficiency replacement of conventional lighting sources. Herein, we report the luminescent behavior of three simple cyanostilbenes with triphenylamine-donating groups bearing different electron-withdrawing groups (phenyl, pyridyl, and p-nitrophenyl) in a common donor (D)-π-acceptor (A) α-cyanostilbene construct along with their thermal and electrochemical properties. The density functional theory (DFT) studies reveal that aggregation-induced emission characteristic feature of the D-π-A dyes is inversely proportional to the intramolecular charge transfer (ICT) effect, that is, phenyl-and pyridyl-substituted compounds show characteristic aggregation-induced emission in water, whereas the ICT effect is dominant for the nitro derivative. The extent of ICT and the solvatochromic emission shifts, from blue to red, depend on the strength of the electron-withdrawing group. White luminescence and tunable emission colors are obtained by careful admixtures of these cyanostilbenes bearing triphenylamines. The results rationalized through DFT and time-dependent DFT calculations follow a consistent trend with the energy levels measured from the electrochemical and optical studies. Thermogravimetric analysis and differential scanning calorimetry studies showed excellent thermal stability of the compounds. The scanning electron microscopy and dynamic light scattering measurements were performed to reveal the formation of aggregates. This strategy involving synthetically simple and structurally similar molecules with different emission properties has potential applications in the fabrication of multicolor and white-light-emitting materials.

| S-EPMC6643655 | biostudies-literature

Aggregation-Induced Emission Metallocuboctahedra for White Light Devices.

Project description:Materials for organic light-emitting devices which exhibit superior emission properties in both the solution and solid states with a high fluorescence quantum yield have been extensively sought after. Herein, two metallocages, S1 and S2, were constructed, and both showed typical aggregation-induced emission (AIE) features with intense yellow fluorescence. By adding blue-emissive 9,10-dimethylanthracene, pure white light emission can be produced in the solution of S1 and S2. Furthermore, due to the remarkable AIE feature and good fluorescence quantum yield in the solid state, metallocages are highly emissive in the solid state and can be utilized to coat blue LED bulbs or integrate with blue-emitting chips to obtain white light. This study advances the usage of metallocages as practical solid-state fluorescent materials and provides a fresh perspective on highly emissive AIE materials.

| S-EPMC9795569 | biostudies-literature

Blue and white light emission from zinc oxide nanoforests.

Project description:Blue and white light emission is observed when high voltage stress is applied using micrometer-separated tungsten probes across a nanoforest formed of ZnO nanorods. The optical spectrum of the emitted light consistently shows three fine peaks with very high amplitude in the 465-485 nm (blue) range, corresponding to atomic transitions of zinc. Additional peaks with smaller amplitudes in the 330-650 nm range and broad spectrum white light is observed depending on the excitation conditions. The spatial and spectral distribution of the emitted light, with pink-orange regions identifying percolation paths in some cases and high intensity blue and white light with center to edge variations in others, indicate that multiple mechanisms lead to light emission. Under certain conditions, the tungsten probe tips used to make electrical contact with the ZnO structures melt during the excitation, indicating that the local temperature can exceed 3422 °C, which is the melting temperature of tungsten. The distinct and narrow peaks in the optical spectra and the abrupt increase in current at high electric fields suggest that a plasma is formed by application of the electrical bias, giving rise to light emission via atomic transitions in gaseous zinc and oxygen. The broad spectrum, white light emission is possibly due to the free electron transitions in the plasma and blackbody radiation from molten silicon. The white light may also arise from the recombination through multiple defect levels in ZnO or due to the optical excitation from solid ZnO. The electrical measurements performed at different ambient pressures result in light emission with distinguishable differences in the emission properties and I-V curves, which also indicate that the dielectric breakdown of ZnO, sublimation, and plasma formation processes are the underlying mechanisms.

| S-EPMC4734415 | biostudies-literature

Environmentally benign technology for efficient warm-white light emission.

Project description:Nowadays efficient down conversion for white light emission is mainly based on rare-earth doped phosphors or cadmium-containing quantum dots. Although they exhibit high luminescence efficiency, the rare-earth mining and cadmium pollution have so far led to extremely high environmental cost, which conflicts the original purpose of pursuing efficient lighting. Here, we explore a new strategy to achieve efficient luminescence conversion based on polymer-decorated nanoparticles. The ZnO and Mn(2+) doped ZnS nanoparticles are encapsulated by poly(9,9-di-n- hexylfluorenyl-2,7-diyl). The resultant core-shell nanocomposites then encompass three UV-to-visible luminescence conversion routes for photon emissions at blue, green, and orange colors, respectively. As a result, the color temperature is widely tunable (2100 K ~ 6000 K), so candle light or pure white light can be generated. The quantum yield up to 91% could also be achieved. Such rare-earth-element free nanocomposites give the bright perspectives for energy-saving, healthy, and environmentally benign lighting.

| S-EPMC4058875 | biostudies-literature

Single-Lens Light-Sheet Fluorescence Microscopy Based on Micro-Mirror Array.

Project description:Conventional light sheet fluorescence microscopy (LSFM) utilizes two perpendicularly arranged objective lenses for optical excitation and detection, respectively. Such a configuration often limits the use of high-numerical-aperture (NA) objectives or requires specially designed long-working-distance objectives. Here, a LSFM based on a micro-mirror array (MMA) to enable light sheet imaging with a single objective lens is reported. The planar fluorescent emission excited by the light sheet illumination is collected by the same objective, relayed onto an MMA and detected by a side-view camera. The proposed scheme makes LSFM compatible to single objective imaging system and shows promising candidacy for high spatiotemporal imaging.

| S-EPMC9648671 | biostudies-literature

Pulsed-laser micropatterned quantum-dot array for white light source.

Project description:In this study, a novel photoluminescent quantum dots device with laser-processed microscale patterns has been demonstrated to be used as a white light emitting source. The pulsed laser ablation technique was employed to directly fabricate microscale square holes with nano-ripple structures onto the sapphire substrate of a flip-chip blue light-emitting diode, confining sprayed quantum dots into well-defined areas and eliminating the coffee ring effect. The electroluminescence characterizations showed that the white light emission from the developed photoluminescent quantum-dot light-emitting diode exhibits stable emission at different driving currents. With a flexibility of controlling the quantum dots proportions in the patterned square holes, our developed white-light emitting source not only can be employed in the display applications with color triangle enlarged by 47% compared with the NTSC standard, but also provide the great potential in future lighting industry with the correlated color temperature continuously changed in a wide range.

| S-EPMC4804257 | biostudies-literature

Light transport and vortex-supported wave-guiding in micro-structured optical fibres.

Project description:In hydrodynamics, vortex generation upon the transition from smooth laminar flows to turbulence is generally accompanied by increased dissipation. However, vortices in the plane can provide transport barriers and decrease losses, as it happens in numerous geophysical, astrophysical flows and in tokamaks. Photon interactions with matter can affect light transport in ways resembling fluid dynamics. Here, we demonstrate significant impact of light vortex formation in micro-structured optical fibres on the energy dissipation. We show possibility of vortex formation in both solid core and hollow core fibres on the zero energy flow lines in the cladding. Through intensive numerical modelling using different independent approaches, we discovered a correlation between appearance of vortices and reduction of light leakage by three orders of magnitude, effectively improving wave guiding. This new effect potentially might have strong impact on numerous practical applications of micro-structured fibres. For instance, a strong light localization based on the same principle can also be achieved in the negative curvature hollow core fibres.

| S-EPMC7018840 | biostudies-literature

Panchromatic Fluorescence Emission from Thienosquaraines Dyes: White Light Electrofluorochromic Devices.

Project description:Electrofluorochromic devices (EFCDs) that allow the modulation of the light emitted by electroactive fluorophores are very attractive in the research field of optoelectronics. Here, the electrofluorochromic behaviour of a series of squaraine dyes was studied for the first time. In solutions, all compounds are photoluminescent with maxima located in the range 665-690 nm, characterized by quantum yields ranging from 30% to 4.1%. Squaraines were incorporated in a polymer gel used as an active layer in all-in-one gel switchable EFCDs. An aggregation induced quenching occurs in the gel phase, causing a significant decrease in the emission quantum yield in the device. However, the squaraines containing the thieno groups (thienosquaraines, TSQs) show a panchromatic emission and their electrofluorochromism allows the tuning of the fluorescence intensity from 500 nm to the near infrared. Indeed, the application of a potential difference to the device induces a reversible quenching of their emission that is significantly higher and occurs at shorter switching times for TSQs-based devices compared to the reference squaraine dye (DIBSQ). Interestingly, the TSQs fluorescence spectral profile becomes more structured under voltage, and this could be explained by the shift of the aggregates/monomer equilibrium toward the monomeric species, due to electrochemical oxidation, which causes the disassembling of aggregates. This effect may be used to modulate the colour of the fluorescence light emitted by a device and paves the way for conceiving new electrofluorochromic materials based on this mechanism.

| S-EPMC8621610 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data