Dataset Information

Free radicals and ultrafine particulate emissions from the co-pyrolysis of Croton megalocarpus biodiesel and fossil diesel.

ABSTRACT:

Background

The atmosphere has become a major transport corridor for free radicals and particulate matter from combustion events. The motivation behind this study was to determine the nature of particulate emissions and surface bound radicals formed during the thermal degradation of diesel blends in order to assess the health and environmental hazards of binary transport fuels.

Methodology

Accordingly, this contribution explored the interactions that occur when Croton megalocarpus biodiesel and fossil diesel in the ratio of 1:1 by weight were co-pyrolyzed in a quartz reactor at a residence time of 0.5 s under an inert flow of nitrogen at 600 °C. The surface morphology of the thermal char formed were imaged using a Feld emission gun scanning electron microscope (FEG SEM) while Electron paramagnetic resonance spectrometer (EPR) was used to explore the presence of free radicals on the surface of thermal char. Molecular functional groups adsorbed on the surface of thermal char were explored using Fourier transform infrared spectroscopy (FTIR).

Results

FTIR spectrum showed that the major functional groups on the surface of the char were basically aromatic and some methylene groups. The particulate emissions detected in this work were ultrafine (~?32 nm). The particulates are consistent with the SEM images observed in this study. Electron paramagnetic resonance results gave a g-value of 2.0027 characteristic of carbon-based radicals of aromatic nature. Spectral peak-to-peak width (?Hp-p) obtained was narrow (4.42 G).

Conclusions

The free radicals identified as carbon-based are medically notorious and may be transported by various sizes of particulate matter on to the surface of the human lung which may trigger cancer and pulmonary diseases. The nanoparticulates determined in this work can precipitate severe biological health problems among humans and other natural ecosystems.

SUBMITTER: Kibet JK

PROVIDER: S-EPMC6081488 | biostudies-literature | 2018 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Free radicals and ultrafine particulate emissions from the co-pyrolysis of Croton megalocarpus biodiesel and fossil diesel.

Kibet Joshua K JK Mosonik Bornes C BC Nyamori Vincent O VO Ngari Silas M SM

Chemistry Central journal 20180807 1

<h4>Background</h4>The atmosphere has become a major transport corridor for free radicals and particulate matter from combustion events. The motivation behind this study was to determine the nature of particulate emissions and surface bound radicals formed during the thermal degradation of diesel blends in order to assess the health and environmental hazards of binary transport fuels.<h4>Methodology</h4>Accordingly, this contribution explored the interactions that occur when Croton megalocarpus ...[more]

PMID: 30088167

Similar Datasets

Project description:Diesel exhaust emissions have been reported for a number of engine operating strategies, after-treatment technologies, and fuels. However, information is limited regarding emissions of many pollutants during idling and when biodiesel fuels are used. This study investigates regulated and unregulated emissions from both light-duty passenger car (1.7 L) and medium-duty (6.4 L) diesel engines at idle and load and compares a biodiesel blend (B20) to conventional ultralow sulfur diesel (ULSD) fuel. Exhaust aftertreatment devices included a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF). For the 1.7 L engine under load without a DOC, B20 reduced brake-specific emissions of particulate matter (PM), elemental carbon (EC), nonmethane hydrocarbons (NMHCs), and most volatile organic compounds (VOCs) compared to ULSD; however, formaldehyde brake-specific emissions increased. With a DOC and high load, B20 increased brake-specific emissions of NMHC, nitrogen oxides (NOx), formaldehyde, naphthalene, and several other VOCs. For the 6.4 L engine under load, B20 reduced brake-specific emissions of PM2.5, EC, formaldehyde, and most VOCs; however, NOx brake-specific emissions increased. When idling, the effects of fuel type were different: B20 increased NMHC, PM2.5, EC, formaldehyde, benzene, and other VOC emission rates from both engines, and changes were sometimes large, e.g., PM2.5 increased by 60% for the 6.4 L/2004 calibration engine, and benzene by 40% for the 1.7 L engine with the DOC, possibly reflecting incomplete combustion and unburned fuel. Diesel exhaust emissions depended on the fuel type and engine load (idle versus loaded). The higher emissions found when using B20 are especially important given the recent attention to exposures from idling vehicles and the health significance of PM2.5. The emission profiles demonstrate the effects of fuel type, engine calibration, and emission control system, and they can be used as source profiles for apportionment, inventory, and exposure purposes.

Project description:Biodiesel is regarded by many as a "greener" alternative fuel to petroleum diesel with potentially lower health risk. However, recent studies examining biodiesel particulate matter (PM) characteristics and health effects are contradictive, and typically utilize PM generated by passenger car engines in laboratory settings. There is a critical need to analyze diesel and biodiesel PM generated in a "real-world" setting where heavy duty-diesel (HDD) engines and commercially purchased fuel are utilized. This study compares the mass concentrations, chemical composition and cytotoxicity of real-world PM from combustion of both petroleum diesel and a waste grease 20% biodiesel blend (B20) at a community recycling center operating HDD nonroad equipment. PM was analyzed for metals, elemental/organic carbon (EC/OC), polycyclic aromatic hydrocarbons (PAHs), and nitro-polycyclic aromatic hydrocarbons (N-PAHs). Cytotoxicity in a human lung epithelial cell line (BEAS-2B) following 24h exposure to the real-world particles was also evaluated. On average, higher concentrations for both EC and OC were measured in diesel PM. B20 PM contained significantly higher levels of Cu and Mo whereas diesel PM contained significantly higher concentrations of Pb. Principal component analysis determined Mo, Cu, and Ni were the metals with the greatest loading factor, suggesting a unique pattern related to the B20 fuel source. Total PAH concentration during diesel fuel use was 1.9 times higher than during B20 operations; however, total N-PAH concentration was 3.3 times higher during B20 use. Diesel PM cytotoxicity was 8.5 times higher than B20 PM (p<0.05) in a BEAS-2B cell line. This study contributes novel data on real-world, nonroad engine sources of metals, PAH and N-PAH species, comparing tailpipe PM vs. PM collected inside the equipment cabin. Results suggest PM generated from burning petroleum diesel in nonroad engines may be more harmful to human health, but the links between exposure, composition and toxicity are not straightforward.

Dataset Information

Free radicals and ultrafine particulate emissions from the co-pyrolysis of Croton megalocarpus biodiesel and fossil diesel.

Background

Methodology

Results

Conclusions

Publications

Free radicals and ultrafine particulate emissions from the co-pyrolysis of Croton megalocarpus biodiesel and fossil diesel.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets