Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cold Vapor Generation beyond the Input Solar Energy Limit.

ABSTRACT: 100% efficiency is the ultimate goal for all energy harvesting and conversion applications. However, no energy conversion process is reported to reach this ideal limit before. Here, an example with near perfect energy conversion efficiency in the process of solar vapor generation below room temperature is reported. Remarkably, when the operational temperature of the system is below that of the surroundings (i.e., under low density solar illumination), the total vapor generation rate is higher than the upper limit that can be produced by the input solar energy because of extra energy taken from the warmer environment. Experimental results are provided to validate this intriguing strategy under 1 sun illumination. The best measured rate is ≈2.20 kg m-2 h-1 under 1 sun illumination, well beyond its corresponding upper limit of 1.68 kg m-2 h-1 and is even faster than the one reported by other systems under 2 sun illumination.

SUBMITTER: Song H

PROVIDER: S-EPMC6096986 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Reactive Inorganic Vapor Deposition of Perovskite Oxynitride Films for Solar Energy Conversion.

Project description:The synthesis of perovskite oxynitrides, which are promising photoanode candidates for solar energy conversion, is normally accomplished by high-temperature ammonolysis of oxides and carbonate precursors, thus making the deposition of their planar films onto conductive substrates challenging. Here, we proposed a facile strategy to prepare a series of perovskite oxynitride films. Taking SrTaO2N as a prototype, we prepared SrTaO2N films on Ta foils under NH3 flow by utilizing the vaporized SrCl2/SrCO3 eutectic salt. The SrTaO2N films exhibit solar water-splitting photocurrents of 3.0 mA cm-2 at 1.23 V vs. RHE (reversible hydrogen electrode), which increases by 270% compared to the highest photocurrent (1.1 mA cm-2 at 1.23 V vs. RHE) of SrTaO2N reported in the literature. This strategy may also be applied to directly prepare a series of perovskite oxynitride films on conductive substrates such as ATaO2N (A = Ca, Ba) and ANbO2N (A = Sr, Ba).

| S-EPMC6946269 | biostudies-literature

Solar-Driven Soil Remediation along with the Generation of Water Vapor and Electricity.

Project description:As a renewable energy source, solar energy has become an important part of human energy use. However, facilities utilizing solar energy are often complex and technically difficult, and preparation equipment and materials are expensive, while these equipment and materials often cause new environmental pollution. Soil, which exists in large quantities on the earth's surface, is an inexhaustible natural material with loose and stable properties. Due to the specificity of its composition and microscopic form, the soil has an inherent advantage as a medium for solar thermal and photovoltaic conversion. Here, we built an integrated solar energy utilization system, the Integrated Soil Utilization Module (ISUM), integrating multi-functions into one hybrid system, which enables solar-driven water vapor and electricity generation and soil remediation. The evaporation rate of the soil represented by the rocky land was 1.2 kg·m-2·h-1 under 1-sun irradiation with evaporation induced voltage of 0.3 V. With only seven days of continuous exposure to sunlight, the removal of heavy metal ions from the soil reached 90%, while the pH was raised to near neutral. The combined application of readily available natural soil with solar energy not only demonstrates the potential of a soil for solar desalination and power generation, but in addition, solar-driven interfacial evaporation provides an energy-efficient, environmentally friendly, and sustainable method for purifying heavy metal and acid-contaminated soil.

| S-EPMC9182396 | biostudies-literature

Integrated photoelectrochemical energy storage: solar hydrogen generation and supercapacitor.

Project description:Current solar energy harvest and storage are so far realized by independent technologies (such as solar cell and batteries), by which only a fraction of solar energy is utilized. It is highly desirable to improve the utilization efficiency of solar energy. Here, we construct an integrated photoelectrochemical device with simultaneous supercapacitor and hydrogen evolution functions based on TiO(2)/transition metal hydroxides/oxides core/shell nanorod arrays. The feasibility of solar-driven pseudocapacitance is clearly demonstrated, and the charge/discharge is indicated by reversible color changes (photochromism). In such an integrated device, the photogenerated electrons are utilized for H(2) generation and holes for pseudocapacitive charging, so that both the reductive and oxidative energies are captured and converted. Specific capacitances of 482 F g(-1) at 0.5 A g(-1) and 287 F g(-1) at 1 A g(-1) are obtained with TiO(2)/Ni(OH)(2) nanorod arrays. This study provides a new research strategy for integrated pseudocapacitor and solar energy application.

| S-EPMC3522068 | biostudies-literature

Luminescent Solar Power-PV/Thermal Hybrid Electricity Generation for Cost-Effective Dispatchable Solar Energy.

Project description:The challenge in solar energy today is not the cost of photovoltaic (PV) electricity generation, already competing with fossil fuel prices, but rather utility-scale energy storage and flexibility in supply. Low-cost thermal energy storage (TES) exists but relies on expensive heat engines. Here, we introduce the concept of luminescent solar power (LSP), where sunlight is absorbed in a photoluminescent (PL) absorber, followed by red-shifted PL emission matched to an adjacent PV cell's band edge. This way the PV cell operates nearly as efficiently as under direct illumination but with minimal excessive heat. The PL absorber temperature rises because of thermalization, allowing it to store the excessive heat, which can later be converted into electricity. Tailored luminescent materials that support an additional 1.5 kW h PV electricity for every 1 kW h of (virtual) heat engine electricity with a dynamic shift between the two sources are experimentally demonstrated. Such an ideal hybrid system may lead to a potential reduction in the cost of electricity for a base-load solution.

| S-EPMC7526987 | biostudies-literature

Low-Cost and High-Efficiency Solar-Driven Vapor Generation Using a 3D Dyed Cotton Towel.

Project description:Solar-driven vapor generation is a promising method to mitigate freshwater shortage and water contamination. However, most of the current highly efficient solar evaporators suffer from low robustness, tedious preparation procedures, and high cost. In this study, an easy-to-manufacture, low-cost, and high-reliability solar-driven evaporator is designed using a black cotton towel with a hollow conical shape. The reactive dye molecules diffuse into the cotton and form strong covalent bonds with the fiber after dyeing, which firmly fixes light-absorbing materials on the substrate. The looped pile structure of towels and hierarchical structure of yarns enable the evaporator enlarged surface area. The hollow conical shape of the cotton towel can effectively suppress the heat loss to the environment without compromising light absorption. The 3D vapor generator exhibits an evaporation rate of 1.40 and 1.27 kg m-2 h-1 for pure water and saline water, respectively. Meanwhile, this towel-based solar-driven evaporator exhibits a promising antifouling property as well as superior reusability and provides a reliable pathway in dealing with realistic waters, such as seawater and dyeing sewage. Therefore, the low-cost, solar-driven water evaporation system offers a complementary approach for high-efficiency vapor generation and water purification in practical application.

| S-EPMC6733398 | biostudies-literature

Thermodynamic analysis of a Rankine cycle powered vapor compression ice maker using solar energy.

Project description:To develop the organic Rankine-vapor compression ice maker driven by solar energy, a thermodynamic model was developed and the effects of generation temperature, condensation temperature, and working fluid types on the system performance were analyzed. The results show that the cooling power per square meter collector and ice production per square meter collector per day depend largely on generation temperature and condensation temperature and they increase firstly and then decrease with increasing generation temperature. For every working fluid there is an optimal generation temperature at which organic Rankine efficiency achieves the maximum value. The cooling power per square meter collector and ice production per square meter collector per day are, respectively, 126.44 W m(-2) and 7.61 kg m(-2) day(-1) at the generation temperature of 140 °C for working fluid of R245fa, which demonstrates the feasibility of organic Rankine cycle powered vapor compression ice maker.

| S-EPMC4151356 | biostudies-other

Extremely Cost-Effective and Efficient Solar Vapor Generation under Nonconcentrated Illumination Using Thermally Isolated Black Paper.

Project description:Passive solar vapor generation represents a promising and environmentally benign method of water purification/desalination. However, conventional solar steam generation techniques usually rely on costly and cumbersome optical concentration systems and have relatively low efficiency due to bulk heating of the entire liquid volume. Here, an efficient strategy using extremely low-cost materials, i.e., carbon black (powder), hydrophilic porous paper, and expanded polystyrene foam is reported. Due to the excellent thermal insulation between the surface liquid and the bulk volume of the water and the suppressed radiative and convective losses from the absorber surface to the adjacent heated vapor, a record thermal efficiency of ≈88% is obtained under 1 sun without concentration, corresponding to the evaporation rate of 1.28 kg (m2 h)-1. When scaled up to a 100 cm2 array in a portable solar water still system and placed in an outdoor environment, the freshwater generation rate is 2.4 times of that of a leading commercial product. By simultaneously addressing both the need for high-efficiency operation as well as production cost limitations, this system can provide an approach for individuals to purify water for personal needs, which is particularly suitable for undeveloped regions with limited/no access to electricity.

| S-EPMC5445597 | biostudies-literature

Promoting citizen science in the energy sector: Generation Solar, an open database of small-scale solar photovoltaic installations.

Project description:Citizen science is becoming an effective approach in building a new relationship between science and society, in which the desire of citizens to participate actively in knowledge production meets the needs of researchers. A citizen science initiative dealing with the development of photovoltaics (PV) is presented. To generate a "responsible" initiative, the research question has been designed collectively from the beginning, involving diverse actors in order to encourage creativity while addressing their interests and concerns. The result has been called Generation Solar. It aims at co-creating an open database of PV installations including their technical characteristics, and an online map for visualizing them. The initiative responds to a clear scientific demand; an important drawback for researchers working on energy modelling and predictions of production lays precisely in the lack of information about these installations' locations and characteristics. The initiative invites citizens, companies and public institutions with a PV installation to collaborate by providing such data. Data will follow the format of Open Power System Data in order to be fully exploitable by the scientific community and society. The success of the initiative will rely on the capacity to mobilize citizens and register the largest possible number of installations worldwide.

| S-EPMC10445918 | biostudies-literature

Source Sector Mitigation of Solar Energy Generation Losses Attributable to Particulate Matter Pollution.

Project description:Particulate matter (PM) in the atmosphere and deposited on solar photovoltaic (PV) panels reduce PV energy generation. Reducing anthropogenic PM sources will therefore increase carbon-free energy generation and as a cobenefit will improve surface air quality. However, we lack a global understanding of the sectors that would be the most effective at achieving the necessary reductions in PM sources. Here we combine well-evaluated models of solar PV performance and atmospheric composition to show that deep cuts in air pollutant emissions from the residential, on-road, and energy sectors are the most effective approaches to mitigate PM-induced PV energy losses over East and South Asia, and the Tibetan Plateau, Central Asia, and the Arabian Peninsula, and Western Siberia, respectively. Using 2019 PV capacities as a baseline, we find that a 50% reduction in residential emissions would lead to an additional 10.3 TWh yr-1 (US$878 million yr-1) and 2.5 TWh yr-1 (US$196 million yr-1) produced in China and India, respectively.

| S-EPMC9228073 | biostudies-literature

Observing collisions beyond the secular approximation limit.

Project description:Quantum coherence plays an essential role in diverse natural phenomena and technological applications. The unavoidable coupling of the quantum system to an uncontrolled environment incurs dissipation that is often described using the secular approximation. Here we probe the limit of this approximation in the rotational relaxation of molecules due to thermal collisions by using the laser-kicked molecular rotor as a model system. Specifically, rotational coherences in N2O gas (diluted in He) are created by two successive nonresonant short and intense laser pulses and probed by studying the change of amplitude of the rotational alignment echo with the gas density. By interrogating the system at the early stage of its collisional relaxation, we observe a significant variation of the dissipative influence of collisions with the time of appearance of the echo, featuring a decoherence process that is well reproduced by the nonsecular quantum master equation for modeling molecular collisions.

| S-EPMC6920365 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data