Dataset Information

Improved Registration of 3D CT Angiography with X-ray Fluoroscopy for Image Fusion During Transcatheter Aortic Valve Implantation.

ABSTRACT: The fusion of 3D anatomical models derived from high-fidelity pre-interventional computed tomography angiography (CTA), and x-ray (XR) fluoroscopy to facilitate anatomical guidance is of huge interest for complex cardiac interventions like TAVI procedures with cerebral protection. Co-registration of CTA and XR has been introduced either based on additional intraoperative non-/contrast-enhanced cone-beam computed tomography (CBCT) or two separate aortograms. With the related increase of radiation exposure and/or contrast agent (CA) dose, a potential additional risk for the patient is introduced. Here, we propose a modified co-registration approach making use of arteriograms of the iliofemoral arteries, routinely performed during the femoral puncture and sheath introduction. On-the-fly refinement of the co-registration during the on-going procedure enables accurate co-registration without any additional angiograms, thus reducing CA, XR dose and procedure time, while simultaneously improving operator confidence and procedure safety.

SUBMITTER: Vernikouskaya I

PROVIDER: S-EPMC6101552 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Improved Registration of 3D CT Angiography with X-ray Fluoroscopy for Image Fusion During Transcatheter Aortic Valve Implantation.

Vernikouskaya Ina I Rottbauer Wolfgang W Seeger Julia J Gonska Birgid B Wöhrle Jochen J Rasche Volker V

Journal of visualized experiments : JoVE 20180603 136

The fusion of 3D anatomical models derived from high-fidelity pre-interventional computed tomography angiography (CTA), and x-ray (XR) fluoroscopy to facilitate anatomical guidance is of huge interest for complex cardiac interventions like TAVI procedures with cerebral protection. Co-registration of CTA and XR has been introduced either based on additional intraoperative non-/contrast-enhanced cone-beam computed tomography (CBCT) or two separate aortograms. With the related increase of radiation ...[more]

PMID: 29912207

Similar Datasets

Project description:BackgroundTranscatheter aortic valve implantation (TAVI) is a well-established treatment for patients with severe aortic valve stenosis. This procedure requires pre-operative planning by assessment of aortic dimensions on CT Angiography (CTA). It is well-known that the aortic root dimensions vary over the heart cycle. However, sizing is commonly performed at either mid-systole or end-diastole only, which has resulted in an inadequate understanding of its full dynamic behavior.Study goalWe studied the variation in annulus measurements during the cardiac cycle and determined if this variation is dependent on the amount of calcification at the annulus.MethodsWe measured and compared aortic root annular dimensions and calcium volume in CTA acquisitions at 10 cardiac cycle phases in 51 aortic stenosis patients. Sub-group analysis was performed based on the volume of calcium by splitting the population into mildly and severely calcified valves subgroups.ResultsFor most annulus measurements, the largest differences were found between 10% and 70 to 80% cardiac cycle phases. Mean difference (±standard deviation) in annular minimum diameter, maximum diameter, area, and aspect ratio between mid-systole and end-diastole phases were 1.0 ± 0.29 mm (p = 0.065), 0.30 ± 0.24 mm (p = 0.7), 24.1 ± 7.6 mm2 (p < 0.001), and 0.041 ± 0.012 (p = 0.039) respectively. Calcium volume measurements varied strongly during the cardiac cycle. The dynamic annulus area was behaving differently between mildly and severely calcified subgroups (p = 0.02). Furthermore, patients with severe aortic calcification were associated with larger annulus diameters.ConclusionThere is a significant variation of annulus area and calcium volume measurement during the cardiac cycle. In our measurements, only the dynamic variation of the annulus area is dependent on the severity of the aortic calcification. For TAVI candidates, the annulus area is significantly larger in mid-systole compared to end-diastole.

Project description:ObjectiveTranscatheter aortic valve implantation (TAVI) procedures are increasing rapidly, but the durability of tissue valve and periprocedural complications are not satisfactory. Immune reaction to the galactose-α-1,3 galactose β-1,4-N-acetylglucosamine (α-Gal) and conventional processing protocols of cardiac xenografts lead to calcification. Next-generation TAVI needs to be made with α-Gal-free xenografts by multiple anticalcification therapies to avoid immune rejection and enhance durability, and three-dimensional (3D) printing technology to improve the procedural safety.MethodsPorcine pericardia were decellularized and immunologically modified with α-galactosidase. The pericardia were treated by space filler, crosslinked with glutaraldehyde in organic solvent, and detoxified. The sheep-specific nitinol (nickel-titanium memory alloy) wire backbone was made from a 3D-printed model for ovine aortic root. After it passed the fitting test, we manufactured a self-expandable stented valve with the porcine pericardia mounted on the customized nitinol wire-based stent. After in vitro circulation using customized silicone aortic root, we performed TAVI in 9 sheep and obtained hemodynamic, radiological, immunohistopathological, and biochemical results.ResultsThe valve functioned well, with excellent stent fitting and good coronary flow under in vitro circulation. Sheep were sequentially scheduled to be humanely killed until 238 days after TAVI. Echocardiography and cardiac catheterization demonstrated good hemodynamic status and function of the aortic valve. The xenografts were well preserved without α-Gal immune reaction or calcification based on the immunological, radiographic, microscopic, and biochemical examinations.ConclusionsWe proved preclinical safety and efficacy for next-generation α-Gal-free TAVI with multiple anticalcification therapies and 3D-printing technology. A future clinical study is warranted based on these promising preclinical results.

Dataset Information

Improved Registration of 3D CT Angiography with X-ray Fluoroscopy for Image Fusion During Transcatheter Aortic Valve Implantation.

Publications

Improved Registration of 3D CT Angiography with X-ray Fluoroscopy for Image Fusion During Transcatheter Aortic Valve Implantation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets