Dataset Information

Simulation of enteric pathogen concentrations in locally-collected greywater and wastewater for microbial risk assessments.

ABSTRACT: As decentralized water reuse continues to gain popularity, risk-based treatment guidance is increasingly sought for the protection of public health. However, effort s to evaluate pathogen risks and log-reduction requirements have been hindered by an incomplete understanding of pathogen occurrence and densities in locally-collected wastewaters (i.e., from decentralized collection systems). Of particular interest is the potentially high enteric pathogen concentration in small systems with an active infected excreter, but generally lower frequency of pathogen occurrences in smaller systems compared to those with several hundred contributors. Such variability, coupled with low concentrations in many source streams (e.g., sink, shower/bath, and laundry waters), has limited direct measurement of pathogens. This study presents an approach to modeling pathogen concentrations in variously sized greywater and combined wastewater collection systems based on epidemiological pathogen incidence rates, user population size, and fecal loadings to various residential wastewater sources. Pathogen infections were modeled within various population sizes (5-, 100-, and 1,000-person) for seven reference pathogens (viruses: adenoviruses, Norovirus, and Rotavirus; bacteria: Campylobacter and Salmonella spp.; and protozoa: Cryptosporidium and Giardia spp.) on each day of 10,000 possible years, accounting for intermittent infection and overlap of infection periods within the population. Fecal contamination of fresh greywaters from bathroom sinks, showers/baths, and laundry, as well as combined greywater and local combined wastewater (i.e., including toilets), was modeled based on reported fecal indicators in the various sources. Simulated daily infections and models of fecal contamination were coupled with pathogen shedding characteristics to generate distributions of pathogen densities in the various waters. The predicted frequency of pathogen occurrences in local wastewaters was generally low due to low infection incidence within small cohort groups, but increased with collection scale (population size) and infection incidence rate (e.g., Norovirus). When pathogens did occur, a decrease in concentrations from 5- to 100- and from 100- to 1,000-person systems was observed; nonetheless, overall mean concentrations (i.e., including non-occurrences) remained the same due to the increased number of occurrences. This highlights value of the model for characterizing scaling effects over averaging methods, which overestimate the frequency of pathogen occurrence in small systems while underestimating concentration peaks that likely drive risk periods. Results of this work will inform development of risk-based pathogen reduction requirements for decentralized water reuse.

SUBMITTER: Jahne MA

PROVIDER: S-EPMC6104838 | biostudies-literature | 2017 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Simulation of enteric pathogen concentrations in locally-collected greywater and wastewater for microbial risk assessments.

Jahne Michael A MA Schoen Mary E ME Garland Jay L JL Ashbolt Nicholas J NJ

Microbial risk analysis 20170401

As decentralized water reuse continues to gain popularity, risk-based treatment guidance is increasingly sought for the protection of public health. However, effort s to evaluate pathogen risks and log-reduction requirements have been hindered by an incomplete understanding of pathogen occurrence and densities in locally-collected wastewaters (<i>i.e.</i>, from decentralized collection systems). Of particular interest is the potentially high enteric pathogen concentration in small systems with a ...[more]

PMID: 30148198

Similar Datasets

Project description:This paper presents risk-based enteric pathogen log reduction targets for non-potable and potable uses of a variety of alternative source waters (i.e., locally-collected greywater, roof runoff, and stormwater). A probabilistic Quantitative Microbial Risk Assessment (QMRA) was used to derive the pathogen log10 reduction targets (LRTs) that corresponded with an infection risk of either 10-4 per person per year (ppy) or 10-2 ppy. The QMRA accounted for variation in pathogen concentration and sporadic pathogen occurrence (when data were available) in source waters for reference pathogens in the genera Rotavirus, Mastadenovirus(human adenoviruses), Norovirus, Campylobacter, Salmonella, Giardia and Cryptosporidium. Non-potable uses included indoor use (for toilet flushing and clothes washing) with occasional accidental ingestion of treated non-potable water (or cross-connection with potable water), and unrestricted irrigation for outdoor use. Various exposure scenarios captured the uncertainty from key inputs, i.e., the pathogen concentration in source water; the volume of water ingested; and for the indoor use, the frequency of and the fraction of the population exposed to accidental ingestion. Both potable and non-potable uses required pathogen treatment for the selected waters and the LRT was generally greater for potable use than non-potable indoor use and unrestricted irrigation. The difference in treatment requirements among source waters was driven by the microbial quality of the water - both the density and occurrence of reference pathogens. Greywater from collection systems with 1000 people had the highest LRTs; however, those for greywater collected from a smaller population (~ 5 people), which have less frequent pathogen occurrences, were lower. Stormwater had highly variable microbial quality, which resulted in a range of possible treatment requirements. The microbial quality of roof runoff, and thus the resulting LRTs, remains uncertain due to lack of relevant pathogen data.

Project description:We assessed the annual probability of infection resulting from non-potable exposures to distributed greywater and domestic wastewater treated by an aerobic membrane bioreactor (MBR) followed by chlorination. A probabilistic quantitative microbial risk assessment was conducted for both residential and office buildings and a residential district using Norovirus, Rotavirus, Campylobacter jejuni, and Cryptosporidium spp. as reference pathogens. A Monte Carlo approach captured variation in pathogen concentration in the collected water and pathogen (or microbial surrogate) treatment performance, when available, for various source water and collection scale combinations. Uncertain inputs such as dose-response relationships and the volume ingested were treated deterministically and explored through sensitivity analysis. The predicted 95th percentile annual risks for non-potable indoor reuse of distributed greywater and domestic wastewater at district and building scales were less than the selected health benchmark of 10-4 infections per person per year (ppy) for all pathogens except Cryptosporidium spp., given the selected exposure (which included occasional, accidental ingestion), dose-response, and treatment performance assumptions. For Cryptosporidium spp., the 95th percentile annual risks for reuse of domestic wastewater (for all selected collection scenarios) and district-collected greywater were greater than the selected health benchmark when using the limited, available MBR treatment performance data; this finding is counterintuitive given the large size of Cryptosporidium spp. relative to the MBR pores. Therefore, additional data on MBR removal of protozoa is required to evaluate the proposed MBR treatment process for non-potable reuse. Although the predicted Norovirus annual risks were small across scenarios (less than 10-7 infections ppy), the risks for Norovirus remain uncertain, in part because the treatment performance is difficult to interpret given that the ratio of total to infectious viruses in the raw and treated effluents remains unknown. Overall, the differences in pathogen characterization between collection type (i.e., office vs. residential) and scale (i.e., district vs. building) drove the differences in predicted risk; and, the accidental ingestion event (although modeled as rare) determined the annual probability of infection. The predicted risks resulting from treatment malfunction scenarios indicated that online, real-time monitoring of both the MBR and disinfection processes remains important for non-potable reuse at distributed scales. The resulting predicted health risks provide insight on the suitability of MBR treatment for distributed, non-potable reuse at different collection scales and the potential to reduce health risks for non-potable reuse.

Project description:UnlabelledBovine parvovirus (BPV), the causative agent of respiratory and gastrointestinal disease in cows, is the type member of the Bocaparvovirus genus of the Parvoviridae family. Toward efforts to obtain a template for the development of vaccines and small-molecule inhibitors for this pathogen, the structure of the BPV capsid, assembled from the major capsid viral protein 2 (VP2), was determined using X-ray crystallography as well as cryo-electron microscopy and three-dimensional image reconstruction (cryo-reconstruction) to 3.2- and 8.8-Å resolutions, respectively. The VP2 region ordered in the crystal structure, from residues 39 to 536, conserves the parvoviral eight-stranded jellyroll motif and an αA helix. The BPV capsid displays common parvovirus features: a channel at and depressions surrounding the 5-fold axes and protrusions surrounding the 3-fold axes. However, rather than a depression centered at the 2-fold axes, a raised surface loop divides this feature in BPV. Additional observed density in the capsid interior in the cryo-reconstructed map, compared to the crystal structure, is interpreted as 10 additional N-terminal residues, residues 29 to 38, that radially extend the channel under the 5-fold axis, as observed for human bocavirus 1 (HBoV1). Surface loops of various lengths and conformations extend from the core jellyroll motif of VP2. These loops confer the unique surface topology of the BPV capsid, making it strikingly different from HBoV1 as well as the type members of other Parvovirinae genera for which structures have been determined. For the type members, regions structurally analogous to those decorating the BPV capsid surface serve as determinants of receptor recognition, tissue and host tropism, pathogenicity, and antigenicity.ImportanceBovine parvovirus (BPV), identified in the 1960s in diarrheic calves, is the type member of the Bocaparvovirus genus of the nonenveloped, single-stranded DNA (ssDNA) Parvoviridae family. The recent isolation of human bocaparvoviruses from children with severe respiratory and gastrointestinal infections has generated interest in understanding the life cycle and pathogenesis of these emerging viruses. We have determined the high-resolution structure of the BPV capsid assembled from its predominant capsid protein VP2, known to be involved in a myriad of functions during host cell entry, pathogenesis, and antigenicity for other members of the Parvovirinae. Our results show the conservation of the core secondary structural elements and the location of the N-terminal residues for the known bocaparvovirus capsid structures. However, surface loops with high variability in sequence and conformation give BPV a unique capsid surface topology. Similar analogous regions in other Parvovirinae type members are important as determinants of receptor recognition, tissue and host tropism, pathogenicity, and antigenicity.

Dataset Information

Simulation of enteric pathogen concentrations in locally-collected greywater and wastewater for microbial risk assessments.

Publications

Simulation of enteric pathogen concentrations in locally-collected greywater and wastewater for microbial risk assessments.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets