Exfoliation of Transition Metal Dichalcogenides by a High-Power Femtosecond Laser.
Ontology highlight
ABSTRACT:
SUBMITTER: An SJ
PROVIDER: S-EPMC6113326 | biostudies-literature | 2018 Aug
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:As heavy metal-free quantum dots, transition metal dichalcogenides (TMDs) and boron nitride (BN) quantum dots (QDs) have aroused great interest due to features such as good thermal conductivity, chemical stability, and unique optical properties. Although TMDs have been synthesized using different methods, most of these methods require time-consuming or complex steps, limiting the applications of TMDs. We propose a fast and simple method for the synthesis of high-quality molybdenum disulfide (MoS2) QDs and tungsten disulfide (WS2) QDs based on femtosecond laser ablation and sonication-assisted liquid exfoliation. The prepared MoS2 QDs and WS2 QDs were characterized by transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The resulting products possessed few-layered thickness with an average size of 3.7?nm and 2.1?nm. Due to the abundance of functional groups on their surface, the MoS2 QDs and WS2 QDs showed bright blue-green luminescence under UV irradiation. Our method offers a facile and novel synthetic strategy for TMDs QDs and other two-dimensional nanomaterial quantum dots, such as boron nitride quantum dots (BNQDs).
| S-EPMC6393534 | biostudies-literature
Project description:Laser processing is a highly versatile technique for the post-synthesis treatment and modification of transition metal dichalcogenides (TMDCs). However, to date, TMDCs synthesis typically relies on large area CVD growth and lithographic post-processing for nanodevice fabrication, thus relying heavily on complex, capital intensive, vacuum-based processing environments and fabrication tools. This inflexibility necessarily restricts the development of facile, fast, very low-cost synthesis protocols. Here we show that direct, spatially selective synthesis of 2D-TMDCs devices that exhibit excellent electrical, Raman and photoluminescence properties can be realized using laser printing under ambient conditions with minimal lithographic or thermal overheads. Our simple, elegant process can be scaled via conventional laser printing approaches including spatial light modulation and digital light engines to enable mass production protocols such as roll-to-roll processing.
| S-EPMC7933426 | biostudies-literature
Project description:Using a conventional Raman experimental apparatus, we demonstrate that the photoluminescent (PL) yield from ultrasonication-exfoliated transition metal dichalcogenides (TMDs) (MoS2 and WS2) can be increased by up to 8-fold by means of a laser etching procedure. This laser etching process allows us to controllably pattern and reduce the number of layers of the solution-exfoliated material, overcoming the key drawback to solvent-based exfoliation of two-dimensional (2D) semiconducting materials for applications in optoelectronics. The successful laser thinning of the exfoliated 2D crystals was investigated systematically by changes in both Raman and PL spectra. A simple proof-of-principle of the scalability of this laser etching technique for solution-exfoliated TMD crystals was also demonstrated. As well as being applicable for individual materials, it is also possible to use this simple laser etching technique to investigate the structure of solution-generated van der Waals heterostructures, consisting of layers of both MoS2 and WS2.
| S-EPMC6641068 | biostudies-literature
Project description:2D transition metal dichalcogenides (2D-TMDs) and their unique polymorphic features such as the semiconducting 1H and quasi-metallic 1T' phases exhibit intriguing optical and electronic properties, which can be used in novel electronic and photonic device applications. With the favorable quasi-metallic nature of 1T'-phase 2D-TMDs, the 1H-to-1T' phase engineering processes are an immensely vital discipline exploited for novel device applications. Here, a high-yield 1H-to-1T' phase transition of monolayer-MoS2 on Cu and monolayer-WSe2 on Au via an annealing-based process is reported. A comprehensive experimental and first-principles study is performed to unravel the underlying mechanism and derive the general trends for the high-yield phase transition process of 2D-TMDs on metallic substrates. While each 2D-TMD possesses different intrinsic 1H-1T' energy barriers, the option of metallic substrates with higher chemical reactivity plays a significantly pivotal role in enhancing the 1H-1T' phase transition yield. The yield increase is achieved via the enhancement of the interfacial hybridizations by the means of increased interfacial binding energy, larger charge transfer, shorter interfacial spacing, and weaker bond strength. Fundamentally, this study opens up the field of 2D-TMD/metal-like systems to further scientific investigation and research, thereby creating new possibilities for 2D-TMDs-based device applications.
| S-EPMC6446595 | biostudies-literature
Project description:Ultrafast lasers have become increasingly important as research tools in laboratories and commercial enterprises suggesting laser safety, personal protection and awareness become ever more important. Laser safety eyewear are typically rated by their optical densities (OD) over various spectral ranges, but these measurements are usually made using low power, large beam size, and continuous beam conditions. These measurement scenarios are vastly different than the high power, small beam size, and pulsed laser beam conditions where ultrafast lasers have extremely high peak powers and broad spectra due to the short pulse durations. Many solid-state lasers are also tunable over a broad wavelength range, further complicating the selection of adequate laser safety eyewear. Eighteen laser eyewear filter samples were tested under real-world conditions using a Ti:Sapphire regenerative amplifier with output pulses centered at 800 nm running from 2 Hz to 1 KHz repetition rate. The typical maximum peak laser irrandiance employed was ca. 3 TW/cm2 (800 nm wavelength, 450 uJ/pulse with 80 fs FWHM pulse duration) or less when damage occurred, depending on the sample. While many samples maintained their integrity under these test conditions, many plastic samples showed signs of failure which reduced their OD, in some cases transmitting 4 to 5 orders of magnitude higher than expected. In general, glass filters performed significantly better than plastic filters, exhibiting less physical damage to the substrate and less absorber degradation.
| S-EPMC6459187 | biostudies-literature
Project description:Theoretically, it has been known that breaking spin degeneracy and effectively realizing spinless fermions is a promising path to topological superconductors. Yet, topological superconductors are rare to date. Here we propose to realize spinless fermions by splitting the spin degeneracy in momentum space. Specifically, we identify monolayer hole-doped transition metal dichalcogenide (TMD)s as candidates for topological superconductors out of such momentum-space-split spinless fermions. Although electron-doped TMDs have recently been found superconducting, the observed superconductivity is unlikely topological because of the near spin degeneracy. Meanwhile, hole-doped TMDs with momentum-space-split spinless fermions remain unexplored. Employing a renormalization group analysis, we propose that the unusual spin-valley locking in hole-doped TMDs together with repulsive interactions selectively favours two topological superconducting states: interpocket paired state with Chern number 2 and intrapocket paired state with finite pair momentum. A confirmation of our predictions will open up possibilities for manipulating topological superconductors on the device-friendly platform of monolayer TMDs.
| S-EPMC5394266 | biostudies-literature
Project description:Unzipping of the basal plane offers a valuable pathway to uniquely control the material chemistry of 2D structures. Nonetheless, reliable unzipping has been reported only for graphene and phosphorene thus far. The single elemental nature of those materials allows a straightforward understanding of the chemical reaction and property modulation involved with such geometric transformations. Here we report spontaneous linear ordered unzipping of bi-elemental 2D MX2 transition metal chalcogenides as a general route to synthesize 1D nanoribbon structures. The strained metallic phase (1T') of MX2 undergoes highly specific longitudinal unzipping owing to the self-linearized oxygenation at chalcogenides. Stable dispersions of 1T' MoS2 nanoribbons with widths of 10-120 nm and lengths up to ~4 µm are produced in water. Edge abundant 1T' MoS2 nanoribbons reveal the hidden potential of idealized electrocatalysis for hydrogen evolution reactions at a competitive level with the precious Pt catalyst.
| S-EPMC7538978 | biostudies-literature
Project description:Metal induced nucleation is adopted to achieve the growth of transition metal dichalcogenides at controlled locations. Ordered arrays of MoS2 and WS2 have successfully been fabricated on SiO2 substrates by using the patterned Pt/Ti dots as the nucleation sites. Uniform MoS2 monolayers with the adjustable size up to 50??m are grown surrounding these metal patterns and the mobility of such layer is about 0.86?cm2/V·s. The crystalline flakes of WS2 are also fabricated extending from the metal patterns and the electron mobility of these flakes is up to 11.36?cm2/V·s.
| S-EPMC5133539 | biostudies-literature
Project description:This work reports the self-limiting synthesis of an atomically thin, two dimensional transition metal dichalcogenides (2D TMDCs) in the form of MoS2. The layer controllability and large area uniformity essential for electronic and optical device applications is achieved through atomic layer deposition in what is named self-limiting layer synthesis (SLS); a process in which the number of layers is determined by temperature rather than process cycles due to the chemically inactive nature of 2D MoS2. Through spectroscopic and microscopic investigation it is demonstrated that SLS is capable of producing MoS2 with a wafer-scale (~10?cm) layer-number uniformity of more than 90%, which when used as the active layer in a top-gated field-effect transistor, produces an on/off ratio as high as 10(8). This process is also shown to be applicable to WSe2, with a PN diode fabricated from a MoS2/WSe2 heterostructure exhibiting gate-tunable rectifying characteristics.
| S-EPMC4698672 | biostudies-literature
Project description:Understanding the electron transport through transition-metal dichalcogenide (TMDC)-based semiconductor/metal junctions is vital for the realization of future TMDC-based (opto-)electronic devices. Despite the bonding in TMDCs being largely constrained within the layers, strong Fermi-level pinning (FLP) was observed in TMDC-based devices, reducing the tunability of the Schottky barrier height. We present evidence that metal-induced gap states (MIGS) are the origin for the large FLP similar to conventional semiconductors. A variety of TMDCs (MoSe2, WSe2, WS2, and MoTe2) were investigated using high-spatial-resolution surface characterization techniques, permitting us to distinguish between defected and pristine regions. The Schottky barrier heights on the pristine regions can be explained by MIGS, inducing partial FLP. The FLP strength is further enhanced by disorder-induced gap states induced by transition-metal vacancies or substitutionals at the defected regions. Our findings emphasize the importance of defects on the electron transport properties in TMDC-based devices and confirm the origin of FLP in TMDC-based metal/semiconductor junctions.
| S-EPMC6410613 | biostudies-literature