Dataset demonstrating physical properties of recycled wind turbine blade composites.
Ontology highlight
ABSTRACT:
SUBMITTER: Mamanpush SH
PROVIDER: S-EPMC6129738 | biostudies-literature | 2018 Oct
REPOSITORIES: biostudies-literature
Publications
Dataset demonstrating physical properties of recycled wind turbine blade composites.
Mamanpush Seyed Hossein SH Li Hui H Englund Karl K Tabatabaei Azadeh Tavousi AT
Data in brief 20180831
Wind turbine blades that face end-of-life recycled mechanically. The recycled material was first comminuted via a hammer-mill through a range of varying screen sizes, resinated and compressed to a final thickness to manufacture second generation composites fabricated using recycled wind turbine material and a polyurethane adhesive. Physical properties (water sorption (WA), Thickness swelling (TS)) dataset of composites made from recycled wind turbine blades presented. Dataset also presented the ...[more]
Similar Datasets
Project description:Wind turbine blades that face end-of-life recycled mechanically. The recycled material was first comminuted via a hammer-mill through a range of varying screen sizes, resonated (polymeric Methylene diphenyl isocyanate (pMDI)) and then hand-formed and hot pressed. The hot press temperature and time were set as 138 °C and 5 min accordingly, typical for pMDI composite processing. Mechanical properties (Modulus of rupture (MOR), Module of elasticity (MOE) and Internal bond(IB)) dataset of composites made from recycled wind turbine blades(rWTBs) presented. Dataset also presented the influence of resin level, moisture content, mill screen size and density on the mechanical properties of composites [1], [2].
| S-EPMC5992999 | biostudies-literature
Project description:Offshore wind farms are widely adopted by coastal countries to obtain clean and green energy; their environmental impact has gained an increasing amount of attention. Although offshore wind farm datasets are commercially available via energy industries, records of the exact spatial distribution of individual wind turbines and their construction trajectories are rather incomplete, especially at the global level. Here, we construct a global remote sensing-based offshore wind turbine (OWT) database derived from Sentinel-1 synthetic aperture radar (SAR) time-series images from 2015 to 2019. We developed a percentile-based yearly SAR image collection reduction and autoadaptive threshold algorithm in the Google Earth Engine platform to identify the spatiotemporal distribution of global OWTs. By 2019, 6,924 wind turbines were constructed in 14 coastal nations. An algorithm performance analysis and validation were performed, and the extraction accuracies exceeded 99% using an independent validation dataset. This dataset could further our understanding of the environmental impact of OWTs and support effective marine spatial planning for sustainable development.
| S-EPMC8316499 | biostudies-literature
Project description:As wind energy deployment increases and larger wind-power plants are considered, bird fatalities through collision with moving turbine rotor blades are expected to increase. However, few (cost-) effective deterrent or mitigation measures have so far been developed to reduce the risk of collision. Provision of "passive" visual cues may enhance the visibility of the rotor blades enabling birds to take evasive action in due time. Laboratory experiments have indicated that painting one of three rotor blades black minimizes motion smear (Hodos 2003, Minimization of motion smear: Reducing avian collisions with wind turbines). We tested the hypothesis that painting would increase the visibility of the blades, and that this would reduce fatality rates in situ, at the Smøla wind-power plant in Norway, using a Before-After-Control-Impact approach employing fatality searches. The annual fatality rate was significantly reduced at the turbines with a painted blade by over 70%, relative to the neighboring control (i.e., unpainted) turbines. The treatment had the largest effect on reduction of raptor fatalities; no white-tailed eagle carcasses were recorded after painting. Applying contrast painting to the rotor blades significantly reduced the collision risk for a range of birds. Painting the rotor blades at operational turbines was, however, resource demanding given that they had to be painted while in-place. However, if implemented before construction, this cost will be minimized. It is recommended to repeat this experiment at other sites to ensure that the outcomes are generic at various settings.
| S-EPMC7452767 | biostudies-literature
Project description:The data on performance parameters of a horizontal axis small wind turbine (HAWT) with blade tip power system (BTPS) using permanent magnetic generator is presented. The tests are carried out for low wind velocities ranging from 7 m/s to 10 m/s. The data is acquired using data acquisition system equipped with Labview© software and the processed data is represented in terms of non-dimensional parameters, namely power coefficient (Cp), torque coefficient (CT) and tip speed ratio (?). Moreover, as permanent magnetic generator is used in this HAWT with BTPS, the frictional as well as other losses are significantly reduced. This is reflected in terms of non-dimensional electrical power coefficient. The mechanical and electrical power coefficient values are closer with respect to each other. This measured data at laboratory conditions provides a benchmark for future open field environment tests and numerical simulation studies of this small wind turbine.
| S-EPMC6660451 | biostudies-literature
Project description:Wind turbines generate electricity by removing kinetic energy from the atmosphere. Large numbers of wind turbines are likely to reduce wind speeds, which lowers estimates of electricity generation from what would be presumed from unaffected conditions. Here, we test how well wind power limits that account for this effect can be estimated without explicitly simulating atmospheric dynamics. We first use simulations with an atmospheric general circulation model (GCM) that explicitly simulates the effects of wind turbines to derive wind power limits (GCM estimate), and compare them to a simple approach derived from the climatological conditions without turbines [vertical kinetic energy (VKE) estimate]. On land, we find strong agreement between the VKE and GCM estimates with respect to electricity generation rates (0.32 and 0.37 We m-2) and wind speed reductions by 42 and 44%. Over ocean, the GCM estimate is about twice the VKE estimate (0.59 and 0.29 We m-2) and yet with comparable wind speed reductions (50 and 42%). We then show that this bias can be corrected by modifying the downward momentum flux to the surface. Thus, large-scale limits to wind power use can be derived from climatological conditions without explicitly simulating atmospheric dynamics. Consistent with the GCM simulations, the approach estimates that only comparatively few land areas are suitable to generate more than 1 We m-2 of electricity and that larger deployment scales are likely to reduce the expected electricity generation rate of each turbine. We conclude that these atmospheric effects are relevant for planning the future expansion of wind power.
| S-EPMC5137733 | biostudies-literature
Project description:Controlling the system-the environment of power plants is called such a transformation-their material, energy and information inputs in time, which will ensure that the purpose of the operation of this system or the state of the environment, is achieved. The transformations of systems and environmental inputs and their goals describe the different models, e.g., LCA model groups and methods. When converting wind kinetic energy into electricity, wind power plants emit literally no harmful substances into the environment. However, the production and postuse management stages of their components require large amounts of energy and materials. The biggest controlling problem during postuse management is wind power plant blades, followed by waste generated during their production. Therefore, this publication is aimed at carrying out an ecological, technical and energetical transformation analysis of selected postproduction waste of wind power plant blades based on the LCA models and methods. The research object of control was eight different types of postproduction waste (fiberglass mat, roving fabric, resin discs, distribution hoses, spiral hoses with resin, vacuum bag film, infusion materials residues, surplus mater), mainly made of polymer materials, making it difficult for postuse management and dangerous for the environment. Three groups of models and methods were used: Eco-indicator 99, IPCC and CED. The impact of analysis objects on human health, ecosystem quality and resources was controlled and assessed. Of all the tested waste, the life cycle of resin discs made of epoxy resin was characterized by the highest level of harmful technology impact on the environment and the highest energy consumption. Postuse control and management in the form of recycling would reduce the negative impact on the environment of the tested waste (in the perspective of their entire life cycle). Based on the results obtained, guidelines and models for the proecological postuse control of postproduction polymer waste of wind power plants blades were proposed.
| S-EPMC7464857 | biostudies-literature
Project description:Understanding the fatigue damage mechanisms in composite materials is of great importance in the wind turbine industry because of the very large number of loading cycles rotor blades undergo during their service life. In this paper, the fatigue damage mechanisms of a non-crimp unidirectional (UD) glass fibre reinforced polymer (GFRP) used in wind turbine blades are characterised by time-lapse ex-situ helical X-ray computed tomography (CT) at different stages through its fatigue life. Our observations validate the hypothesis that off-axis cracking in secondary oriented fibre bundles, the so-called backing bundles, are directly related to fibre fractures in the UD bundles. Using helical X-ray CT we are able to follow the fatigue damage evolution in the composite over a length of 20 mm in the UD fibre direction using a voxel size of (2.75 µm)³. A staining approach was used to enhance the detectability of the narrow off-axis matrix and interface cracks, partly closed fibre fractures and thin longitudinal splits. Instead of being evenly distributed, fibre fractures in the UD bundles nucleate and propagate locally where backing bundles cross-over, or where stitching threads cross-over. In addition, UD fibre fractures can also be initiated by the presence of extensive debonding and longitudinal splitting, which were found to develop from debonding of the stitching threads near surface. The splits lower the lateral constraint of the originally closely packed UD fibres, which could potentially make the composite susceptible to compressive loads as well as the environment in service. The results here indicate that further research into the better design of the positioning of stitching threads, and backing fibre cross-over regions is required, as well as new approaches to control the positions of UD fibres.
| S-EPMC6266001 | biostudies-literature
Project description:Commissioned by the Swiss Federal Office for the Environment, an update of an earlier narrative review was prepared for the literature published between 2017 and mid-2020 about the effects of wind turbine sound on the health of local residents. Specific attention was hereby given to the health effects of low-frequency sound and infrasound. The Netherlands Institute for Public Health and the Environment and Mundonovo sound research collected the scientific literature on the effect of wind turbines on annoyance, sleep disturbance, cardiovascular disease, and metabolic effects, as well as mental and cognitive impacts. It also investigated what is known about annoyance from visual aspects of wind turbines and other non-acoustic factors, such as the local decision-making process. From the literature study, annoyance again came forward as the most important consequence of sound: the louder the sound (in dB) of wind turbines, the stronger the annoyance response was. The literature did not show that "low-frequency sound" (sound with a low pitch) results in extra annoyance on top of normal sound. Results of scientific research for other health effects are either not available or inconsistent, and we can conclude that a clear association with wind turbine related sound levels cannot be confirmed. There is evidence that long-term effects are related to the annoyance people experience. These results confirm earlier conclusions. There is increasing evidence that annoyance is lower when people can participate in the siting process. Worries of residents should be addressed in an early stage, by involving them in the process of planning and decision making.
| S-EPMC8430592 | biostudies-literature
Project description:Wind turbine noise is one of the major obstacles for the widespread use of wind energy. Noise tone can greatly increase the annoyance factor and the negative impact on human health. Noise annoyance caused by wind turbines has become an emerging problem in recent years, due to the rapid increase in number of wind turbines, triggered by sustainable energy goals set forward at the national and international level. Up to now, not all aspects of the generation, propagation and perception of wind turbine noise are well understood. For a modern large wind turbine, aerodynamic noise from the blades is generally considered to be the dominant noise source, provided that mechanical noise is adequately eliminated. The sources of aerodynamic noise can be divided into tonal noise, inflow turbulence noise, and airfoil self-noise. Many analytical and experimental acoustical studies performed the wind turbines. Since the wind turbine noise level analyzing by numerical methods or computational fluid dynamics (CFD) could be very challenging and time consuming, soft computing techniques are preferred. To estimate noise level of wind turbine, this paper constructed a process which simulates the wind turbine noise levels in regard to wind speed and sound frequency with adaptive neuro-fuzzy inference system (ANFIS). This intelligent estimator is implemented using Matlab/Simulink and the performances are investigated. The simulation results presented in this paper show the effectiveness of the developed method.
| S-EPMC4116176 | biostudies-literature
Project description:BACKGROUND: Wind turbine noise exposure and suspected health-related effects thereof have attracted substantial attention. Various symptoms such as sleep-related problems, headache, tinnitus and vertigo have been described by subjects suspected of having been exposed to wind turbine noise. OBJECTIVE: This review was conducted systematically with the purpose of identifying any reported associations between wind turbine noise exposure and suspected health-related effects. DATA SOURCES: A search of the scientific literature concerning the health-related effects of wind turbine noise was conducted on PubMed, Web of Science, Google Scholar and various other Internet sources. STUDY ELIGIBILITY CRITERIA: All studies investigating suspected health-related outcomes associated with wind turbine noise exposure were included. RESULTS: Wind turbines emit noise, including low-frequency noise, which decreases incrementally with increases in distance from the wind turbines. Likewise, evidence of a dose-response relationship between wind turbine noise linked to noise annoyance, sleep disturbance and possibly even psychological distress was present in the literature. Currently, there is no further existing statistically-significant evidence indicating any association between wind turbine noise exposure and tinnitus, hearing loss, vertigo or headache. LIMITATIONS: Selection bias and information bias of differing magnitudes were found to be present in all current studies investigating wind turbine noise exposure and adverse health effects. Only articles published in English, German or Scandinavian languages were reviewed. CONCLUSIONS: Exposure to wind turbines does seem to increase the risk of annoyance and self-reported sleep disturbance in a dose-response relationship. There appears, though, to be a tolerable level of around LAeq of 35 dB. Of the many other claimed health effects of wind turbine noise exposure reported in the literature, however, no conclusive evidence could be found. Future studies should focus on investigations aimed at objectively demonstrating whether or not measureable health-related outcomes can be proven to fluctuate depending on exposure to wind turbines.
| S-EPMC4256253 | biostudies-literature