Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Noncollinear and nonlinear pulse propagation.

ABSTRACT: A novel method for numerical modelling of noncollinear and nonlinear interaction of femtosecond laser pulses is presented. The method relies on a separate treatment of each of the interacting pulses by it's own rotated unidirectional pulse propagation equation (UPPE). We show that our method enables accurate simulations of the interaction of pulses travelling at a mutual angle of up to 140°. The limit is imposed by the unidirectionality principal. Additionally, a novel tool facilitating the preparation of noncollinear propagation initial conditions - a 3D Fourier transform based rotation technique - is presented. The method is tested with several linear and nonlinear cases and, finally, four original results are presented: (i) interference of highly chirped pulses colliding at mutual angle of 120°, (ii) optical switching through cross-focusing of perpendicular beams (iii) a comparison between two fluorescence up-conversion processes in BBO with large angles between the input beams and (iv) a degenerate four-wave mixing experiment in a boxcar configuration.

SUBMITTER: Kardas TM

PROVIDER: S-EPMC6156600 | biostudies-literature | 2018 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Noncollinear and nonlinear pulse propagation.

Kardaś Tomasz M TM Stepanenko Yuriy Y Radzewicz Czesław C

Scientific reports 20180925 1

A novel method for numerical modelling of noncollinear and nonlinear interaction of femtosecond laser pulses is presented. The method relies on a separate treatment of each of the interacting pulses by it's own rotated unidirectional pulse propagation equation (UPPE). We show that our method enables accurate simulations of the interaction of pulses travelling at a mutual angle of up to 140°. The limit is imposed by the unidirectionality principal. Additionally, a novel tool facilitating the prep ...[more]

PMID: 30254201

Similar Datasets

Ultra-fast pulse propagation in nonlinear graphene/silicon ridge waveguide.

Project description:We report the femtosecond laser propagation in a hybrid graphene/silicon ridge waveguide with demonstration of the ultra-large Kerr coefficient of graphene. We also fabricated a slot-like graphene/silicon ridge waveguide which can enhance its effective Kerr coefficient 1.5 times compared with the graphene/silicon ridge waveguide. Both transverse-electric-like (TE-like) mode and transverse-magnetic-like (TM-like) mode are experimentally measured and numerically analyzed. The results show nonlinearity dependence on mode polarization not in graphene/silicon ridge waveguide but in slot-like graphene/silicon ridge waveguide. Great spectral broadening was observed due to self-phase modulation (SPM) after propagation in the hybrid waveguide with length of 2 mm. Power dependence property of the slot-like hybrid waveguide is also measured and numerically analyzed. The results also confirm the effective Kerr coefficient estimation of the hybrid structures. Spectral blue shift of the output pulse was observed in the slot-like graphene/silicon ridge waveguide. One possible explanation is that the blue shift was caused by the ultra-fast free carrier effect with the optical absorption of the doped graphene. This interesting effect can be used for soliton compression in femtosecond region. We also discussed the broadband anomalous dispersion of the Kerr coefficient of graphene.

| S-EPMC4649747 | biostudies-other

Full 3D modelling of pulse propagation enables efficient nonlinear frequency conversion with low energy laser pulses in a single-element tripler.

Project description:Although new optical materials continue to open up access to more and more wavelength bands where femtosecond laser pulses can be generated, light frequency conversion techniques are still indispensable in filling the gaps on the ultrafast spectral scale. With high repetition rate, low pulse energy laser sources (oscillators) tight focusing is necessary for a robust wave mixing and the efficiency of broadband nonlinear conversion is limited by diffraction as well as spatial and temporal walk-off. Here we demonstrate a miniature third harmonic generator (tripler) with conversion efficiency exceeding 30%, producing 246 fs UV pulses via cascaded second order processes within a single laser beam focus. Designing this highly efficient and ultra compact frequency converter was made possible by full 3-dimentional modelling of propagation of tightly focused, broadband light fields in nonlinear and birefringent media.

| S-EPMC5320497 | biostudies-literature

Radiofrequency pulse design using nonlinear gradient magnetic fields.

Project description:PurposeAn iterative k-space trajectory and radiofrequency (RF) pulse design method is proposed for excitation using nonlinear gradient magnetic fields.Theory and methodsThe spatial encoding functions (SEFs) generated by nonlinear gradient fields are linearly dependent in Cartesian coordinates. Left uncorrected, this may lead to flip angle variations in excitation profiles. In the proposed method, SEFs (k-space samples) are selected using a matching pursuit algorithm, and the RF pulse is designed using a conjugate gradient algorithm. Three variants of the proposed approach are given: the full algorithm, a computationally cheaper version, and a third version for designing spoke-based trajectories. The method is demonstrated for various target excitation profiles using simulations and phantom experiments.ResultsThe method is compared with other iterative (matching pursuit and conjugate gradient) and noniterative (coordinate-transformation and Jacobian-based) pulse design methods as well as uniform density spiral and EPI trajectories. The results show that the proposed method can increase excitation fidelity.ConclusionAn iterative method for designing k-space trajectories and RF pulses using nonlinear gradient fields is proposed. The method can either be used for selecting the SEFs individually to guide trajectory design, or can be adapted to design and optimize specific trajectories of interest.

| S-EPMC4362804 | biostudies-literature

Observation of replica symmetry breaking in disordered nonlinear wave propagation.

Project description:A landmark of statistical mechanics, spin-glass theory describes critical phenomena in disordered systems that range from condensed matter to biophysics and social dynamics. The most fascinating concept is the breaking of replica symmetry: identical copies of the randomly interacting system that manifest completely different dynamics. Replica symmetry breaking has been predicted in nonlinear wave propagation, including Bose-Einstein condensates and optics, but it has never been observed. Here, we report the experimental evidence of replica symmetry breaking in optical wave propagation, a phenomenon that emerges from the interplay of disorder and nonlinearity. When mode interaction dominates light dynamics in a disordered optical waveguide, different experimental realizations are found to have an anomalous overlap intensity distribution that signals a transition to an optical glassy phase. The findings demonstrate that nonlinear propagation can manifest features typical of spin-glasses and provide a novel platform for testing so-far unexplored fundamental physical theories for complex systems.

| S-EPMC5688108 | biostudies-literature

A General Approach To Combine the Advantages of Collinear and Noncollinear Spectrometer Designs in Phase-Resolved Second-Order Nonlinear Spectroscopy.

Project description:Recent years have seen a huge progress in the development of phase-sensitive second-order laser spectroscopy which has proven to be a very powerful tool for the investigation of interfaces. In these techniques, the nonlinear interaction between two short laser pulses and the sample yields a signal pulse which subsequently interferes with a third pulse, the so-called local oscillator. To obtain accurate phase information, the relative phases between the signal and local oscillator pulses must be stabilized and their timings precisely controlled. Despite much progress made, fulfilling both requirements remains a formidable experimental challenge. The two common approaches employ different beam geometries which each yields its particular advantages and deficiencies. While noncollinear spectrometers allow for a relatively simple timing control they typically yield poor phase stability and require a challenging alignment. Collinear approaches in contrast come with a simplified alignment and improved phase stability but typically suffer from a highly limited timing control. In this contribution we present a general experimental solution which allows for combining the advantages of both approaches while being compatible with most of the common spectrometer types. On the basis of a collinear geometry, we exploit different selected polarization states of the light pulses in well-defined places in the spectrometer to achieve a precise timing control. The combination of this technique with a balanced detection scheme allows for the acquisition of highly accurate phase-resolved nonlinear spectra without any loss in experimental flexibility. In fact, we show that the implementation of this technique allows us to employ advanced pulse timing schemes inside the spectrometer, which can be used to suppress nonlinear background signals and extend the capabilities of our spectrometer to measure phase-resolved sum frequency spectra of interfaces in a liquid cell.

| S-EPMC6935974 | biostudies-literature

Propagation-Invariant Space-Time Plasmonic Pulse in Subwavelength MIM Waveguide.

Project description:The metal-insulator-metal (MIM) plasmonic waveguide has been highly anticipated for confining and guiding surface plasmon polaritons (SPPs) on the subwavelength scale. However, perennial drawbacks such as a short propagation length and an unbounded transverse field have set limits on the use of the MIM waveguide in various applications. Herein, diffraction- and dispersion-free MIM modes are synthesized by using space-time wave packets (STWPs) and are therefore referred to as space-time MIM (ST-MIM) waveguide modes. Compared to a Gaussian pulse of the same duration and spectral bandwidth, the ST-MIM demonstrates enhanced propagation lengths of about 2.4 times for the symmetric mode and about 6.3 times for the antisymmetric mode. In the simulations, the ST-MIMs are confined in all transverse dimensions, thereby overriding the diffraction limits. In addition, the group velocities of the ST-MIMs can be arbitrarily designed, which makes it possible to synchronize the pulse propagation speeds of the symmetric and antisymmetric MIM modes.

| S-EPMC10934031 | biostudies-literature

Nonlinear Rayleigh wave propagation in thermoelastic media in dual-phase-lag.

Project description:A model of generalized thermoelasticity within dual-phase-lag is used to investigate nonlinear Rayleigh wave propagation in a half-space of a transversely isotropic elastic material. It is assumed that the coefficient of heat conduction is temperature-dependent, a fact that plays an important role in the coupling behaviour analysis of thermoelastic and piezo-thermoelastic solids. Taking such a dependence into account becomes a necessity at higher temperatures and in nano-structures, when the material properties can no longer be considered as constants. Normal mode analysis is applied to find a particular solution to the problem under consideration. A concrete case is solved under prescribed boundary conditions and tentative values of the different material coefficients. The results are discussed to reveal the effect of temperature dependence of the heat conduction coefficient, as well as the thermal relaxation times, on nonlinear Rayleigh wave propagation. All quantities of practical interest are illustrated in two-and three-dimensional plots. The presented results may be useful in the detection of the second harmonic amplitudes through measurements related to the propagating heat wave.

| S-EPMC9731999 | biostudies-literature

Noncollinear phases in moire magnets.

Project description:We introduce a general framework to study moiré structures of two-dimensional Van der Waals magnets using continuum field theory. The formalism eliminates quasiperiodicity and allows a full understanding of magnetic structures and their excitations. In particular, we analyze in detail twisted bilayers of Néel antiferromagnets on the honeycomb lattice. A rich phase diagram with noncollinear twisted phases is obtained, and spin waves are further calculated. Direct extensions to zigzag antiferromagnets and ferromagnets are also presented. We anticipate the results and formalism demonstrated to lead to a broad range of applications to both fundamental research and experiments.

| S-EPMC7245139 | biostudies-literature

Rapid assessment of nonlinear optical propagation effects in dielectrics.

Project description:Ultrafast laser processing applications need fast approaches to assess the nonlinear propagation of the laser beam in order to predict the optimal range of processing parameters in a wide variety of cases. We develop here a method based on the simple monitoring of the nonlinear beam shaping against numerical prediction. The numerical code solves the nonlinear Schrödinger equation with nonlinear absorption under simplified conditions by employing a state-of-the art computationally efficient approach. By comparing with experimental results we can rapidly estimate the nonlinear refractive index and nonlinear absorption coefficients of the material. The validity of this approach has been tested in a variety of experiments where nonlinearities play a key role, like spatial soliton shaping or fs-laser waveguide writing. The approach provides excellent results for propagated power densities for which free carrier generation effects can be neglected. Above such a threshold, the peculiarities of the nonlinear propagation of elliptical beams enable acquiring an instantaneous picture of the deposition of energy inside the material realistic enough to estimate the effective nonlinear refractive index and nonlinear absorption coefficients that can be used for predicting the spatial distribution of energy deposition inside the material and controlling the beam in the writing process.

| S-EPMC4288215 | biostudies-other

Nonlinear fracture toughness measurement and crack propagation resistance of functionalized graphene multilayers.

Project description:Despite promising applications of two-dimensional (2D) materials, one major concern is their propensity to fail in a brittle manner, which results in a low fracture toughness causing reliability issues in practical applications. We show that this limitation can be overcome by using functionalized graphene multilayers with fracture toughness (J integral) as high as ~39 J/m2, measured via a microelectromechanical systems-based in situ transmission electron microscopy technique coupled with nonlinear finite element fracture analysis. The measured fracture toughness of functionalized graphene multilayers is more than two times higher than graphene (~16 J/m2). A linear fracture analysis, similar to that previously applied to other 2D materials, was also conducted and found to be inaccurate due to the nonlinear nature of the stress-strain response of functionalized graphene multilayers. A crack arresting mechanism of functionalized graphene multilayers was experimentally observed and identified as the main contributing factor for the higher fracture toughness as compared to graphene. Molecular dynamics simulations revealed that the interactions among functionalized atoms in constituent layers and distinct fracture pathways in individual layers, due to a random distribution of functionalized carbon atoms in multilayers, restrict the growth of a preexisting crack. The results inspire potential strategies for overcoming the relatively low fracture toughness of 2D materials through chemical functionalization.

| S-EPMC5889190 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data