Dataset Information

Evaluation of nonadditive effects in yearling weight of tropical beef cattle.

ABSTRACT: Nonadditive effects may contribute to genetic variation of complex traits. Their inclusion in genetic evaluation models may therefore improve breeding value estimates and lead to more accurate selection decisions. In this study, we evaluated a systematic series of models accounting for additive, dominance and first-order epistatic interaction (additive by additive, GxG; additive by dominance, GxD; and dominance by dominance, DxD) on body yearling weight (YWT) of 2,550 Tropical Composite (TC) and 2,111 Brahman (BB) cattle in Australia. For both breeds, similar estimates of additive and phenotypic variances and narrow and broad-sense heritability values were obtained across the evaluated models except when GxG effect was considered. In this case, additive variance was slightly lower than that obtained in the models which do not consider this effect. The estimated dominance and epistatic variances from additive and dominance effects (AD) and additive, dominance and epistatic effects models (ADE) were greater than that ADH and ADEH models (as described above plus heterozygosity as a covariate). However, all genetic parameter estimates were associated with a large standard deviation. Averaged across ADH and ADHE models, the magnitude of dominance variance compared to the phenotypic variance of YWT was 14% (BB) and 10% (TC). The magnitude of epistasis compared to the phenotypic variance for BB and TC was 17% and 29%, respectively for GxG; 0.7% and 0% for GxD; and 0% and 0% for DxD. The inclusion of nonadditive effects slightly improves the predictive accuracy of breeding values from 0.28 for A to 0.33 for ADHEGxG and from 0.18 for A to 0.23 ADEGxD in BB and TC cattle. Models that included heterozygosity (ADH and ADHE) must be used to estimate nonadditive genetic variance components. A 1 Mb sliding window analysis identified a region on BTA 14 explaining 10.08% and 1.21% of total genetic variance (additive + dominance) of YWT in BB and TC, respectively. Our results suggest that dominance, epistasis, and heterozygosity should be included in models for genetic parameters estimation. To identify the animals with the highest additive genetic value in selection decisions, only the additive effect should be used in evaluation models.

SUBMITTER: Raidan FSS

PROVIDER: S-EPMC6162633 | biostudies-literature | 2018 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Evaluation of nonadditive effects in yearling weight of tropical beef cattle.

Raidan Fernanda S S FSS Porto-Neto Laercio R LR Li Yutao Y Lehnert Sigrid A SA Vitezica Zulma G ZG Reverter Antonio A

Journal of animal science 20180901 10

Nonadditive effects may contribute to genetic variation of complex traits. Their inclusion in genetic evaluation models may therefore improve breeding value estimates and lead to more accurate selection decisions. In this study, we evaluated a systematic series of models accounting for additive, dominance and first-order epistatic interaction (additive by additive, GxG; additive by dominance, GxD; and dominance by dominance, DxD) on body yearling weight (YWT) of 2,550 Tropical Composite (TC) and ...[more]

PMID: 30032181

Similar Datasets

Project description:Hanwoo, an important indigenous and popular breed of beef cattle in Korea, shows rapid growth and has high meat quality. Its yearling weight (YW) and carcass traits (backfat thickness, carcass weight- CW, eye muscle area, and marbling score) are economically important for selection of young and proven bulls. However, measuring carcass traits is difficult and expensive, and can only be performed postmortem. Genomic selection has become an appealing procedure for genetic evaluation of these traits (by inclusion of the genomic data) along with the possibility of multi-trait analysis. The aim of this study was to compare conventional best linear unbiased prediction (BLUP) and single-step genomic BLUP (ssGBLUP) methods, using both single-trait (ST-BLUP, ST-ssGBLUP) and multi-trait (MT-BLUP, MT-ssGBLUP) models to investigate the improvement of breeding-value accuracy for carcass traits and YW. The data comprised of 15,279 phenotypic records for YW and 5,824 records for carcass traits, and 1,541 genotyped animals for 34,479 single-nucleotide polymorphisms. Accuracy for each trait and model was estimated only for genotyped animals by five-fold cross-validation. ssGBLUP models (ST-ssGBLUP and MT-ssGBLUP) showed ~19% and ~36% greater accuracy than conventional BLUP models (ST-BLUP and MT-BLUP) for YW and carcass traits, respectively. Within ssGBLUP models, the accuracy of the genomically estimated breeding value for CW increased (19%) when ST-ssGBLUP was replaced with the MT-ssGBLUP model, as the inclusion of YW in the analysis led to a strong genetic correlation with CW (0.76). For backfat thickness, eye muscle area, and marbling score, ST- and MT-ssGBLUP models yielded similar accuracy. Thus, combining pedigree and genomic data via the ssGBLUP model may be a promising way to ensure acceptable accuracy of predictions, especially among young animals, for ongoing Hanwoo cattle breeding programs. MT-ssGBLUP is highly recommended when phenotypic records are limited for one of the two highly correlated genetic traits.

Project description:BackgroundIn livestock, residual variance has been studied because of the interest to improve uniformity of production. Several studies have provided evidence that residual variance is partially under genetic control; however, few investigations have elucidated genes that control it. The aim of this study was to identify genomic regions associated with within-family residual variance of yearling weight (YW; N = 423) in Nellore bulls with high density SNP data, using different response variables. For this, solutions from double hierarchical generalized linear models (DHGLM) were used to provide the response variables, as follows: a DGHLM assuming non-null genetic correlation between mean and residual variance (rmv ≠ 0) to obtain deregressed EBV for mean (dEBVm) and residual variance (dEBVv); and a DHGLM assuming rmv = 0 to obtain two alternative response variables for residual variance, dEBVv_r0 and log-transformed variance of estimated residuals (ln_[Formula: see text]).ResultsThe dEBVm and dEBVv were highly correlated, resulting in common regions associated with mean and residual variance of YW. However, higher effects on variance than the mean showed that these regions had effects on the variance beyond scale effects. More independent association results between mean and residual variance were obtained when null rmv was assumed. While 13 and 4 single nucleotide polymorphisms (SNPs) showed a strong association (Bayes Factor > 20) with dEBVv and ln_[Formula: see text], respectively, only suggestive signals were found for dEBVv_r0. All overlapping 1-Mb windows among top 20 between dEBVm and dEBVv were previously associated with growth traits. The potential candidate genes for uniformity are involved in metabolism, stress, inflammatory and immune responses, mineralization, neuronal activity and bone formation.ConclusionsIt is necessary to use a strategy like assuming null rmv to obtain genomic regions associated with uniformity that are not associated with the mean. Genes involved not only in metabolism, but also stress, inflammatory and immune responses, mineralization, neuronal activity and bone formation were the most promising biological candidates for uniformity of YW. Although no clear evidence of using a specific response variable was found, we recommend consider different response variables to study uniformity to increase evidence on candidate regions and biological mechanisms behind it.

Project description:BackgroundSelection of cattle that are less sensitive to environmental variation in unfavorable environments and more adapted to harsh conditions is of primary importance for tropical beef cattle production systems. Understanding the genetic background of sensitivity to environmental variation is necessary for developing strategies and tools to increase efficiency and sustainability of beef production. We evaluated the degree of sensitivity of beef cattle performance to environmental variation, at the animal and molecular marker levels (412 K single nucleotide polymorphisms), by fitting and comparing the results of different reaction norm models (RNM), using a comprehensive dataset of Nellore cattle raised under diverse environmental conditions.ResultsHeteroscedastic RNM (with different residual variances for environmental level) provided better fit than homoscedastic RNM. In addition, spline and quadratic RNM outperformed linear RNM, which suggests the existence of a nonlinear genetic component affecting the performance of Nellore cattle. This nonlinearity indicates that within-animal sensitivity depends on the environmental gradient (EG) level and that animals may present different patterns of sensitivity according to the range of environmental variations. The spline RNM showed that sensitivity to environmental variation from harsh to average EG is lowly correlated with sensitivity from average to good EG, at both the animal and molecular marker levels. Although the genomic regions that affect sensitivity in harsher environments were not the same as those associated with less challenging environments, the candidate genes within those regions participate in common biological processes such as those related to inflammatory and immune response. Some plausible candidate genes were identified.ConclusionsSensitivity of tropical beef cattle to environmental variation is not continuous along the environmental gradient, which implies that animals that are less sensitive to harsher conditions are not necessarily less responsive to variations in better environmental conditions, and vice versa. The same pattern was observed at the molecular marker level, i.e. genomic regions and, consequently, candidate genes associated with sensitivity to harsh conditions were not the same as those associated with sensitivity to less challenging conditions.

Project description:Adequate drinking water is essential to maintain acceptable production levels in beef cattle operations. In the context of global climate change, the water scarcity forecasted for the future is a growing concern and it would determine an increase in the use of poorer quality water by the agricultural sector in many parts of the world. However, consumption of high-salt water by cattle has consequences often overlooked. A meta-analysis was carried out to assess the impact of utilizing high-salt water on dry matter (DMI) and water intake (WI), and performance in beef cattle. The dataset was collected from 25 studies, which were conducted between 1960 and 2020. Within the dataset, the water quality was divided into three categories according to the ratio of sulfates (SO4) or sodium chloride (NaCl) to total dissolved solids (TDS): 1) TDS = all studies included (average SO4:TDS = 0.4); 2) NaCl = considered studies in which water salinity was dominated by NaCl (average SO4:TDS = 0.1); and 3) SO4 = considered studies in which water salinity was dominated by SO4 (average SO4:TDS = 0.8). Results showed that DMI and WI were negatively affected by high-salt water consumption, although the magnitude of the effect is dependent on the type of salt dissolved in the water. There was a quadratic effect (P < 0.01) for the WI vs. TDS, WI vs. NaCl, DMI vs. TDS, and DMI vs. NaCl, and a linear effect (P < 0.01) for WI vs. SO4 and WI vs. SO4. Average daily gain (ADG) and feed efficiency (FE) were quadratically (P < 0.01) affected by high-salt water, respectively. This study revealed significant negative effects of high-salt water drinking on beef cattle WI, DMI, and performance. However, the negative effects are exacerbated when cattle drink high-sulfate water when compared with high-chloride water. To the best of our knowledge, this is the first approach to evaluate animal response to high-salt water consumption and could be included in the development of future beef cattle models to account for the impact of water quality on intake and performance. In addition, this meta-analysis highlights the need for research on management strategies to mitigate the negative effects of high-salt water in cattle.

Project description:BackgroundCompared to national evaluations, international collaboration projects further improve accuracies of estimated breeding values (EBV) by building larger reference populations or performing a joint evaluation using data (or proxy of them) from different countries. Genomic selection is increasingly adopted in beef cattle, but, to date, the benefits of including genomic information in international evaluations have not been explored. Our objective was to develop an international beef cattle single-step genomic evaluation and investigate its impact on the accuracy and bias of genomic evaluations compared to current pedigree-based evaluations.MethodsWeaning weight records were available for 331,593 animals from seven European countries. The pedigree included 519,740 animals. After imputation and quality control, 17,607 genotypes at a density of 57,899 single nucleotide polymorphisms (SNPs) from four countries were available. We implemented two international scenarios where countries were modelled as different correlated traits: an international genomic single-step SNP best linear unbiased prediction (SNPBLUP) evaluation (ssSNPBLUPINT) and an international pedigree-based BLUP evaluation (PBLUPINT). Two national scenarios were implemented for pedigree and genomic evaluations using only nationally submitted phenotypes and genotypes. Accuracies, level and dispersion bias of EBV of animals born from 2014 onwards, and increases in population accuracies were estimated using the linear regression method.ResultsOn average across countries, 39 and 17% of sires and maternal-grand-sires with recorded (grand-)offspring across two countries were genotyped. ssSNPBLUPINT showed the highest accuracies of EBV and, compared to PBLUPINT, led to increases in population accuracy of 13.7% for direct EBV, and 25.8% for maternal EBV, on average across countries. Increases in population accuracies when moving from national scenarios to ssSNPBLUPINT were observed for all countries. Overall, ssSNPBLUPINT level and dispersion bias remained similar or slightly reduced compared to PBLUPINT and national scenarios.ConclusionsInternational single-step SNPBLUP evaluations are feasible and lead to higher population accuracies for both large and small countries compared to current international pedigree-based evaluations and national evaluations. These results are likely related to the larger multi-country reference population and the inclusion of phenotypes from relatives recorded in other countries via single-step international evaluations. The proposed international single-step approach can be applied to other traits and breeds.

Dataset Information

Evaluation of nonadditive effects in yearling weight of tropical beef cattle.

Publications

Evaluation of nonadditive effects in yearling weight of tropical beef cattle.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets