Dataset Information

Seed-Layer Free Zinc Tin Oxide Tailored Nanostructures for Nanoelectronic Applications: Effect of Chemical Parameters.

ABSTRACT: Semiconductor nanowires are mostly processed by complex, expensive, and high temperature methods. In this work, with the intent of developing zinc tin oxide nanowires (ZTO NWs) by low-cost and low-complexity processes, we show a detailed study on the influence of chemical parameters in the hydrothermal synthesis of ZTO nanostructures at temperatures of only 200 °C. Two different zinc precursors, the ratio between zinc and tin precursors, and the concentration of the surfactant agent and of the mineralizer were studied. The type and the crystallinity of the nanostructures were found to be highly dependent on the used precursors and on the concentration of each reagent. Conditions for obtaining different ZTO nanostructures were achieved, namely, Zn₂SnO₄ nanoparticles and ZnSnO₃ nanowires with length ?600 nm, with the latter being reported for the first time ever by hydrothermal methods without the use of seed layers. Optical and electrical properties were analyzed, obtaining band gaps of 3.60 and 3.46 eV for ZnSnO₃ and Zn₂SnO₄, respectively, and a resistivity of 1.42 k?·cm for single ZnSnO₃ nanowires, measured using nanomanipulators after localized deposition of Pt electrodes by e-beam assisted gas decomposition. The low-temperature hydrothermal methods explored here proved to be a low-cost, reproducible, and highly flexible route to obtain multicomponent oxide nanostructures, particularly ZTO NWs. The diversity of the synthesized ZTO structures has potential application in next-generation nanoscale devices such as field effect nanotransistors, nanogenerators, resistive switching memories, gas sensors, and photocatalysis.

SUBMITTER: Rovisco A

PROVIDER: S-EPMC6166637 | biostudies-literature | 2018 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Seed-Layer Free Zinc Tin Oxide Tailored Nanostructures for Nanoelectronic Applications: Effect of Chemical Parameters.

Rovisco Ana A Branquinho Rita R Martins Jorge J Oliveira Maria João MJ Nunes Daniela D Fortunato Elvira E Martins Rodrigo R Barquinha Pedro P

ACS applied nano materials 20180720 8

Semiconductor nanowires are mostly processed by complex, expensive, and high temperature methods. In this work, with the intent of developing zinc tin oxide nanowires (ZTO NWs) by low-cost and low-complexity processes, we show a detailed study on the influence of chemical parameters in the hydrothermal synthesis of ZTO nanostructures at temperatures of only 200 °C. Two different zinc precursors, the ratio between zinc and tin precursors, and the concentration of the surfactant agent and of the m ...[more]

PMID: 30294718

Similar Datasets

Project description:Nanosized tin oxide was fabricated with a simple and cost-effective precipitation technique and was analyzed by performing x-ray powder diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, high-resolution transmission electron (HR-TEM) microscopy, energy-dispersive x-ray (EDX) and UV-Vis spectroscopy. The XRD results revealed that tin oxide particles possessed typical orthorhombic structure and exhibited improved crystallinity with annealing. Calcination at 250 °C produced predominantly orthorhombic SnO which transformed to SnO2 at higher temperatures of 500 and 750 °C. HRTEM and FESEM images showed existence of agglomeration within the particles of tin oxide. The absorption was found to increase up to a certain annealing temperature followed by a decrease, which was recorded via UV-Vis spectroscopy. The effect of annealing temperature on dye decomposition behavior of synthesized photocatalysts was studied. It was noted that annealing temperature affects the size of synthesized particles, band gap width and photoactivity of tin oxide. The sample prepared at 500 °C followed first-order kinetics and exhibited maximum photocatalytic reactivity toward methylene blue. The experimental results obtained from the present study indicate that SnO2 is a promising and beneficial catalyst to remove contaminants from wastewater and environment. The antimicrobial evaluation of SnO annealed at 500 °C against selected targets such as E. coli and S. aureus depicted significant inhibition zones in comparison with 250 and 750 °C samples. Furthermore, molecular docking predictions of SnO2 nanoparticles (NPs) were performed against active pocket of β-lactamase and DNA gyrase enzyme belonging to cell wall and nucleic acid biosynthetic pathway, respectively. The fabricated NPs showed good binding score against β-lactamase of both E. coli (- 5.71 kcal/mol) and S. aureus (- 11.83 kcal/mol) alongside DNA gyrase (- 9.57 kcal/mol; E. coli and - 8.61 kcal/mol; S. aureus). These in silico predictions suggested SnO2 NPs as potential inhibitors for selected protein targets and will facilitate to have a clear understanding of their mechanism of action that may contribute toward new antibiotics discovery.

Project description:This article presents a state-of-the-art review and analysis of literature studies on the morphological structure, fabrication, cytotoxicity, and photocatalytic toxicity of zinc oxide nanostructures (nZnO) of mammalian cells. nZnO with different morphologies, e.g., quantum dots, nanoparticles, nanorods, and nanotetrapods are toxic to a wide variety of mammalian cell lines due to in vitro cell-material interactions. Several mechanisms responsible for in vitro cytotoxicity have been proposed. These include the penetration of nZnO into the cytoplasm, generating reactive oxygen species (ROS) that degrade mitochondrial function, induce endoplasmic reticulum stress, and damage deoxyribonucleic acid (DNA), lipid, and protein molecules. Otherwise, nZnO dissolve extracellularly into zinc ions and the subsequent diffusion of ions into the cytoplasm can create ROS. Furthermore, internalization of nZnO and localization in acidic lysosomes result in their dissolution into zinc ions, producing ROS too in cytoplasm. These ROS-mediated responses induce caspase-dependent apoptosis via the activation of B-cell lymphoma 2 (Bcl2), Bcl2-associated X protein (Bax), CCAAT/enhancer-binding protein homologous protein (chop), and phosphoprotein p53 gene expressions. In vivo studies on a mouse model reveal the adverse impacts of nZnO on internal organs through different administration routes. The administration of ZnO nanoparticles into mice via intraperitoneal instillation and intravenous injection facilitates their accumulation in target organs, such as the liver, spleen, and lung. ZnO is a semiconductor with a large bandgap showing photocatalytic behavior under ultraviolet (UV) light irradiation. As such, photogenerated electron-hole pairs react with adsorbed oxygen and water molecules to produce ROS. So, the ROS-mediated selective killing for human tumor cells is beneficial for cancer treatment in photodynamic therapy. The photoinduced effects of noble metal doped nZnO for creating ROS under UV and visible light for killing cancer cells are also addressed.

Dataset Information

Seed-Layer Free Zinc Tin Oxide Tailored Nanostructures for Nanoelectronic Applications: Effect of Chemical Parameters.

Publications

Seed-Layer Free Zinc Tin Oxide Tailored Nanostructures for Nanoelectronic Applications: Effect of Chemical Parameters.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets