Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A PPy/ZnO functional interlayer to enhance electrochemical performance of lithium/sulfur batteries.

ABSTRACT: To enhance the electrochemical performance of the lithium/sulfur batteries, a novel interlayer was prepared by coating the slurry of PPy/ZnO composite onto the surface of a separator. Owing to a three-dimensional hierarchical network structure, PPy/ZnO composite serves as a polysulfide diffusion absorbent that can intercept the migrating soluble polysulfides to enhance the electrochemical performance of the Li/S batteries. The specific capacity of the cell with PPy/ZnO interlayer remained at 579 mAh g^-1 after 100 cycles at 0.2 C. This interlayer can provide novel avenues for the commercial applications of Li/S batteries.

SUBMITTER: Yin F

PROVIDER: S-EPMC6170249 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A PPy/ZnO functional interlayer to enhance electrochemical performance of lithium/sulfur batteries.

Yin Fuxing F Ren Jun J Zhang Yongguang Y Tan Taizhe T Chen Zhihong Z

Nanoscale research letters 20181003 1

To enhance the electrochemical performance of the lithium/sulfur batteries, a novel interlayer was prepared by coating the slurry of PPy/ZnO composite onto the surface of a separator. Owing to a three-dimensional hierarchical network structure, PPy/ZnO composite serves as a polysulfide diffusion absorbent that can intercept the migrating soluble polysulfides to enhance the electrochemical performance of the Li/S batteries. The specific capacity of the cell with PPy/ZnO interlayer remained at 579 ...[more]

PMID: 30284111

Similar Datasets

ZnO quantum dot-modified rGO with enhanced electrochemical performance for lithium-sulfur batteries.

Project description:Lithium-sulfur batteries are considered the most promising next-generation energy storage devices. However, problems like sluggish reaction kinetics and severe shuttle effect need to be solved before the commercialization of Li-S batteries. Here, we successfully prepared ZnO quantum dot-modified reduced graphene oxide (rGO@ZnO QDs), and first introduced it into Li-S cathodes (rGO@ZnO QDs/S). Due to its merits of a catalysis effect and enhancing the reaction kinetics, low surface impedance, and efficient adsorption of polysulfide, rGO@ZnO QDs/S presented excellent rate capacity with clear discharge plateaus even at a high rate of 4C, and superb cycle performance. An initial discharge capacity of 998.8 mA h g-1 was delivered, of which 73.3% was retained after 400 cycles at a high rate of 1C. This work provides a new concept to introduce quantum dots into lithium-sulfur cathodes to realize better electrochemical performance.

| S-EPMC9056673 | biostudies-literature

Fabrication of a Covalent Triazine Framework Functional Interlayer for High-Performance Lithium-Sulfur Batteries.

Project description:The shuttling effect of polysulfides is one of the major problems of lithium-sulfur (Li-S) batteries, which causes rapid capacity fading during cycling. Modification of the commercial separator with a functional interlayer is an effective strategy to address this issue. Herein, we modified the commercial Celgard separator of Li-S batteries with one-dimensional (1D) covalent triazine framework (CTF) and a carbon nanotube (CNT) composite as a functional interlayer. The intertwined CTF/CNT can provide a fast lithium ionic/electronic transport pathway and strong adsorption capability towards polysulfides. The Li-S batteries with the CTF/CNT/Celgard separator delivered a high initial capacity of 1314 mAh g-1 at 0.1 C and remained at 684 mAh g-1 after 400 cycles-1 at 1 C. Theoretical calculation and static-adsorption experiments indicated that the triazine ring in the CTF skeleton possessed strong adsorption capability towards polysulfides. The work described here demonstrates the potential for CTF-based permselective membranes as separators in Li-S batteries.

| S-EPMC8779782 | biostudies-literature

Mesoporous hollow carbon spheres for lithium-sulfur batteries: distribution of sulfur and electrochemical performance.

Project description:Hollow carbon spheres (HCS) with a nanoporous shell are promising for the use in lithium-sulfur batteries because of the large internal void offering space for sulfur and polysulfide storage and confinement. However, there is an ongoing discussion whether the cavity is accessible for sulfur. Yet no valid proof of cavity filling has been presented, mostly due to application of unsuitable high-vacuum methods for the analysis of sulfur distribution. Here we describe the distribution of sulfur in hollow carbon spheres by powder X-ray diffraction and Raman spectroscopy along with results from scanning electron microscopy and nitrogen physisorption. The results of these methods lead to the conclusion that the cavity is not accessible for sulfur infiltration. Nevertheless, HCS/sulfur composite cathodes with areal sulfur loadings of 2.0 mg·cm-2 were investigated electrochemically, showing stable cycling performance with specific capacities of about 500 mAh·g-1 based on the mass of sulfur over 500 cycles.

| S-EPMC5082344 | biostudies-literature

WO3 Nanowire/Carbon Nanotube Interlayer as a Chemical Adsorption Mediator for High-Performance Lithium-Sulfur Batteries.

Project description:We developed a new nanowire for enhancing the performance of lithium-sulfur batteries. In this study, we synthesized WO3 nanowires (WNWs) via a simple hydrothermal method. WNWs and one-dimensional materials are easily mixed with carbon nanotubes (CNTs) to form interlayers. The WNW interacts with lithium polysulfides through a thiosulfate mediator, retaining the lithium polysulfide near the cathode to increase the reaction kinetics. The lithium-sulfur cell achieves a very high initial discharge capacity of 1558 and 656 mAh g-1 at 0.1 and 3 C, respectively. Moreover, a cell with a high sulfur mass loading of 4.2 mg cm-2 still delivers a high capacity of 1136 mAh g-1 at a current density of 0.2 C and it showed a capacity of 939 mAh g-1 even after 100 cycles. The WNW/CNT interlayer maintains structural stability even after electrochemical testing. This excellent performance and structural stability are due to the chemical adsorption and catalytic effects of the thiosulfate mediator on WNW.

| S-EPMC7828354 | biostudies-literature

Fast Heat Transport Inside Lithium-Sulfur Batteries Promotes Their Safety and Electrochemical Performance.

Project description:Lithium-sulfur batteries are paid much attention owing to their high specific capacity and energy density. However, their practical applications are impeded by poor electrochemical performance due to the dissolved polysulfides. The concentration of soluble polysulfides has a linear relationship with the internal heat generation. The issue of heat transport inside lithium-sulfur batteries is often overlooked. Here, we designed a functional separator that not only had a high thermal conductivity of 0.65 W m-1 K-1 but also alleviated the diffusion of dissolved active materials to the lithium anode, improving the electrochemical performance and safety issue. Lithium-sulfur batteries with the functional separator have a specific capacity of 1,126.4 mAh g-1 at 0.2 C, and the specific capacity can be remained up to 893.5 mAh g-1 after 100 cycles. Pouch Cells with high sulfur loading also showed a good electrochemical performance under a lean electrolyte condition of electrolyte/sulfur (E/S) = 3 μL mg-1.

| S-EPMC7549117 | biostudies-literature

Synthesis and Electrochemical Performance of Graphene @ Halloysite Nanotubes/Sulfur Composites Cathode Materials for Lithium-Sulfur Batteries.

Project description:Natural halloysite nanotubes (HNTs) and reduced graphene oxide (RGO) were introduced into the S cathode material to form HNTs/S and RGO@HNTs/S composite electrode to improve the electrochemical performance of Li-S batteries. The effect of acid etching temperature on the morphology and pore structure of HNTs was explored and the morphological characteristics and electrochemical performance of composite electrodes formed by HNTs that after treatment with different acid etching temperatures and RGO were compared. The result shows that the cycling stability and the utilization rate of active substances of the Li-S battery were greatly improved because the pore structure and surface polarity functional groups of HNTs and the introduction of RGO provide a conductive network for insulating sulfur particles. The RGO@HNTs treated by acid treatment at 80 °C (RGO@HNTs-80/S) composite electrode at 0.1 C has an initial capacity of 1134 mAh g-1, the discharge capacity after 50 cycles retains 20.1% higher than the normal S electrode and maintains a specific discharge capacity of 556 mAh g-1 at 1 C. Therefore, RGO and HNTs can effectively improve the initial discharge specific capacity, cycle performance and rate performance of Li-S batteries.

| S-EPMC7720120 | biostudies-literature

Energy-Saving Synthesis of Functional CoS<sub>2</sub>/rGO Interlayer With Enhanced Conversion Kinetics for High-Performance Lithium-Sulfur Batteries.

Project description:Lithium sulfur (Li-S) battery has exhibited great application potential in next-generation high-density secondary battery systems due to their excellent energy density and high specific capacity. However, the practical industrialization of Li-S battery is still affected by the low conductivity of sulfur and its discharge product (Li2S2/Li2S), the shuttle effect of lithium polysulfide (Li2Sn, 4 ≤ n ≤ 8) during charging/discharging process and so on. Here, cobalt disulfide/reduced graphene oxide (CoS2/rGO) composites were easily and efficiently prepared through an energy-saving microwave-assisted hydrothermal method and employed as functional interlayer on commercial polypropylene separator to enhance the electrochemical performance of Li-S battery. As a physical barrier and second current collector, the porous conductive rGO can relieve the shuttle effect of polysulfides and ensure fast electron/ion transfer. Polar CoS2 nanoparticles uniformly distributed on rGO provide strong chemical adsorption to capture polysulfides. Benefitting from the synergy of physical and chemical constraints on polysulfides, the Li-S battery with CoS2/rGO functional separator exhibits enhanced conversion kinetics and excellent electrochemical performance with a high cycling initial capacity of 1,122.3 mAh g-1 at 0.2 C, good rate capabilities with 583.9 mAh g-1 at 2 C, and long-term cycle stability (decay rate of 0.08% per cycle at 0.5 C). This work provides an efficient and energy/time-saving microwave hydrothermal method for the synthesis of functional materials in stable Li-S battery.

| S-EPMC8867214 | biostudies-literature

Three-Dimensionally Ordered Macroporous ZnO Framework as Dual-Functional Sulfur Host for High-Efficiency Lithium-Sulfur Batteries.

Project description:A three-dimensionally ordered macroporous ZnO (3DOM ZnO) framework was synthesized by a template method to serve as a sulfur host for lithium-sulfur batteries. The unique 3DOM structure along with an increased active surface area promotes faster and better electrolyte penetration accelerating ion/mass transfer. Moreover, ZnO as a polar metal oxide has a strong adsorption capacity for polysulfides, which makes the 3DOM ZnO framework an ideal immobilization agent and catalyst to inhibit the polysulfides shuttle effect and promote the redox reactions kinetics. As a result of the stated advantages, the S/3DOM ZnO composite delivered a high initial capacity of 1110 mAh g-1 and maintained a capacity of 991 mAh g-1 after 100 cycles at 0.2 C as a cathode in a lithium-sulfur battery. Even at a high C-rate of 3 C, the S/3DOM ZnO composite still provided a high capacity of 651 mAh g-1, as well as a high areal capacity (4.47 mAh cm-2) under high loading (5 mg cm-2).

| S-EPMC7697050 | biostudies-literature

Synergy between Interconnected Porous Carbon-Sulfur Cathode and Metallic MgB<sub>2</sub> Interlayer as a Lithium Polysulfide Immobilizer for High-Performance Lithium-Sulfur Batteries.

Project description:Lithium-sulfur (Li-S) batteries are the potential candidates for developing high-energy-density electric vehicles. However, poor electrical conductivity of sulfur/discharged products, low active material utilization, shuttle mechanism, and poor cycle life remain the major challenges for the development of Li-S batteries. Herein, we report the nitrogen-doped highly porous carbon (NC) with interconnected pores as the sulfur host (NC-S), which is synthesized by a facile one-step process without using any template and activation agents. The highly interconnected porous structure of NC can accommodate a high amount of sulfur loading and provide space for sulfur volume expansion during redox reactions. Besides, to mitigate the lithium polysulfide dissolution and shuttle mechanism, metallic and polar magnesium diboride (MgB2) is used as an interlayer. Consequently, the NC-S/MgB2 cathode delivers higher specific capacity, rate capability, and excellent cyclic stability than the NC-S cathode and bulk sulfur cathode with MgB2 interlayer. The lithium polysulfide (LPS) adsorption test shows that MgB2 has strong chemisorption toward lithium polysulfides, which can inhibit the dissolution of LPS into the electrolyte and minimizes the shuttle effect. The dynamic electrochemical impedance spectroscopy analysis investigates the electrochemical reaction kinetics of the NC-S/MgB2 cathode during the charging and discharging processes. Overall, this work demonstrates that the synergy between the nitrogen-doped porous carbon-sulfur host and polar metallic MgB2 improves the performance of the Li-S battery, which is beneficial for the development of high-energy-density batteries for the future.

| S-EPMC7482300 | biostudies-literature

Chemical Adsorption and Physical Confinement of Polysulfides with the Janus-faced Interlayer for High-performance Lithium-Sulfur Batteries.

Project description:We design the Janus-like interlayer with two different functional faces for suppressing the shuttle of soluble lithium polysulfides (LPSs) in lithium-sulfur batteries (LSBs). At the front face, the conductive functionalized carbon fiber paper (f-CFP) having oxygen-containing groups i.e., -OH and -COOH on its surface was placed face to face with the sulfur cathode serving as the first barrier accommodating the volume expansion during cycling process and the oxygen-containing groups can also adsorb the soluble LPSs via lithium bonds. At the back face, a crystalline coordination network of [Zn(H2PO4)2(TzH)2]n (ZnPTz) was coated on the back side of f-CFP serving as the second barrier retarding the left LPSs passing through the front face via both physical confinement and chemical adsorption (i.e. Li bonding). The LSB using the Janus-like interlayer exhibits a high reversible discharge capacity of 1,416 mAh g-1 at 0.1C with a low capacity fading of 0.05% per cycle, 92% capacity retention after 200 cycles and ca. 100% coulombic efficiency. The fully charged LSB cell can practically supply electricity to a spinning motor with a nominal voltage of 3.0?V for 28?min demonstrating many potential applications.

| S-EPMC5735181 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data