Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Growth and superconductivity of niobium titanium alloy thin films on strontium titanate (001) single-crystal substrates for superconducting joints.

ABSTRACT: Aiming to introduce NbTi alloy superconducting joints for REBa₂Cu₃O_7-δ (REBCO, RE: rare-earth element) superconducting wires, NbTi alloy thin films were deposited at room temperature on SrTiO₃ (STO) (001) single-crystal substrates, which have a high lattice matching with REBCO (001). The strain, crystallinity, surface morphology, and superconducting property of the films with various thicknesses were investigated. The NbTi films grew in the orientation with (110)NbTi//(001)STO:[001]NbTi and [11-0] NbTi//[100]STO; that is, the NbTi lattices had two directions in the (110) of NbTi. The strain decreased and the crystallinity improved as the film thickness increased. The films were found to crystallize immediately at the interface between the films and substrates by cross-sectional scanning transmission electron microscopy. The flat surfaces of the films have mesh-like morphologies due to the growth of elongated NbTi grains along the [100] and [010] of the STO, reflecting the in-plane two directions of the NbTi lattices. The superconducting transition temperature of the films increased with improvement in the crystallinity of the films. The preparation of superconducting NbTi alloy thin films with sufficient crystallinity at room temperature suggested the possibility of forming the films on REBCO and the applicability of the films as superconducting joints.

SUBMITTER: Shimizu Y

PROVIDER: S-EPMC6181932 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Niobium-titanium (Nb-Ti) superconducting joints for persistent-mode operation.

Project description:Superconducting joints are essential for persistent-mode operation in a superconducting magnet system to produce an ultra-stable magnetic field. Herein, we report rationally designed niobium-titanium (Nb-Ti) superconducting joints and their evaluation results in detail. For practical applications, superconducting joints were fabricated by using a solder matrix replacement method with two types of lead-bismuth (Pb-Bi) solder, including Pb42Bi58 as a new composition. All the joints attained a critical current of >200 A below 1.43 T at 4.2 K. Our optimized superconducting joining method was tested in a closed-loop coil, obtaining a total circuit resistance of 3.25 × 10-14 Ω at 4.2 K in self-field. Finally, persistent-mode operation was demonstrated in an Nb-Ti solenoid coil with a persistent-current switch. This work will pave the way to developing high-performance Nb-Ti superconducting joints for practical applications.

| S-EPMC6776530 | biostudies-literature

Precursor-Led Grain Boundary Engineering for Superior Thermoelectric Performance in Niobium Strontium Titanate.

Project description:We present a novel method to significantly enhance the thermoelectric performance of ceramics in the model system SrTi0.85Nb0.15O3 through the use of the precursor ammonium tetrathiomolybdate (0.5-2% w/w additions). After sintering the precursor-infused green body at 1700 K for 24 h in 5% H2/Ar, single-crystal-like electron transport behavior developed with electrical conductivity reaching ∼3000 S/cm at ∼300 K, almost a magnitude higher than that in the control sample. During processing, the precursor transformed into MoS2, then into MoOx, and finally into Mo particles. This limited grain growth promoted secondary phase generation but importantly helped to reduce the grain boundary barriers. Samples prepared with additions of the precursor exhibited vastly increased electrical conductivity, without significant impact on Seebeck coefficients giving rise to high power factor values of 1760 μW/mK2 at ∼300 K and a maximum thermoelectric figure-of-merit zT of 0.24 at 823 K. This processing strategy provides a simple method to achieve high charge mobility in polycrystalline titanate and related materials and with the potential to create "phonon-glass-electron-crystal" oxide thermoelectric materials.

| S-EPMC10020962 | biostudies-literature

Enhanced superconductivity close to a non-magnetic quantum critical point in electron-doped strontium titanate.

Project description:Studies on quantum critical points (QCP) have focused on magnetic QCPs to date. Remarkable phenomena such as superconductivity due to avoided criticality have been discovered, but we focus here on the non-magnetic counterpart, i.e., the superconductivity of SrTiO3 regarded as being close to a ferroelectric QCP. Here we prepare high-quality Sr1-xLaxTi(16O1-z18Oz)3 single crystals without localisation at low temperatures, which allow us to systematically investigate the La substitution of Sr as an alternative to introducing oxygen vacancies. Analysis of our data based on a theoretical model predicts an appearance of the ferroelectric QCP around 3 × 1018 cm-3. Because of the QCP, the superconducting dome of Sr1-xLaxTiO3 can be raised upwards. Furthermore, remarkable enhancement of Tc (~0.6 K) is achieved by 18O exchange on the Sr1-xLaxTiO3 crystals. These findings provide a new knob for observing intriguing physics around the ferroelectric QCP.

| S-EPMC6374393 | biostudies-literature

Transition from Reconstruction toward Thin Film on the (110) Surface of Strontium Titanate.

Project description:The surfaces of metal oxides often are reconstructed with a geometry and composition that is considerably different from a simple termination of the bulk. Such structures can also be viewed as ultrathin films, epitaxed on a substrate. Here, the reconstructions of the SrTiO3 (110) surface are studied combining scanning tunneling microscopy (STM), transmission electron diffraction, and X-ray absorption spectroscopy (XAS), and analyzed with density functional theory calculations. Whereas SrTiO3 (110) invariably terminates with an overlayer of titania, with increasing density its structure switches from n × 1 to 2 × n. At the same time the coordination of the Ti atoms changes from a network of corner-sharing tetrahedra to a double layer of edge-shared octahedra with bridging units of octahedrally coordinated strontium. This transition from the n × 1 to 2 × n reconstructions is a transition from a pseudomorphically stabilized tetrahedral network toward an octahedral titania thin film with stress-relief from octahedral strontia units at the surface.

| S-EPMC4834633 | biostudies-literature

How heteroepitaxy occurs on strontium titanate.

Project description:In traditional models of heteroepitaxy, the substrate serves mainly as a crystalline template for the thin-film lattice, dictating the initial roughness of the film and the degree of coherent strain. Here, performing in situ surface x-ray diffraction during the heteroepitaxial growth of LaTiO3 on SrTiO3 (001), we find that a TiO2 adlayer composed of the ( 13 × 13 ) R33.7° and ( 2 × 2 ) R45.0° reconstructions is a highly active participant in the growth process, continually diffusing to the surface throughout deposition. The effects of the TiO2 adlayer on layer-by-layer growth are investigated using different deposition sequences and anomalous x-ray scattering, both of which permit detailed insight into the dynamic layer rearrangements that take place. Our work challenges commonly held assumptions regarding growth on TiO2-terminated SrTiO3 (001) and demonstrates the critical role of excess TiO2 surface stoichiometry on the initial stages of heteroepitaxial growth on this important perovskite oxide substrate material.

| S-EPMC6461459 | biostudies-literature

Electrochemical Synthesis of Nb-Doped BaTiO<sub>3</sub> Nanoparticles with Titanium-Niobium Alloy as Electrode.

Project description:In this paper, Nb-doped BaTiO3 nanoparticles (BaNb0.47Ti0.53O3) were prepared using an electrochemical method in an alkaline solution, with titanium-niobium alloy as the electrode. The results indicated that under relatively mild conditions (normal temperature and pressure, V < 60 V, I < 5 A), cubic perovskite phase Nb-doped BaTiO3 nanoparticles with high crystallinity and uniform distribution can be synthesized. With this increase in alkalinity, the crystallinity of the sample increases, the crystal grain size decreases, and the particles become more equally dispersed. Furthermore, in our study, the average grain size of the nanoparticles was 5-20 nm, and the particles with good crystallinity were obtained at a concentration of 3 mol/L of NaOH. This provides a new idea and method for introducing foreign ions under high alkalinity conditions.

| S-EPMC9862403 | biostudies-literature

Quasi-two-dimensional superconductivity in FeSe0.3Te0.7 thin films and electric-field modulation of superconducting transition.

Project description:We report the structural and superconducting properties of FeSe0.3Te0.7 (FST) thin films with different thicknesses grown on ferroelectric Pb(Mg1/3Nb2/3)0.7Ti0.3O3 substrates. It was shown that the FST films undergo biaxial tensile strains which are fully relaxed for films with thicknesses above 200 nm. Electrical transport measurements reveal that the ultrathin films exhibit an insulating behavior and superconductivity appears for thicker films with Tc saturated above 200 nm. The current-voltage curves around the superconducting transition follow the Berezinskii-Kosterlitz-Thouless (BKT) transition behavior and the resistance-temperature curves can be described by the Halperin-Nelson relation, revealing quasi-two-dimensional phase fluctuation in FST thin films. The Ginzburg number decreases with increasing film thickness indicating the decrease of the strength of thermal fluctuations. Upon applying electric field to the heterostructure, Tc of FST thin film increases due to the reduction of the tensile strain in FST. This work sheds light on the superconductivity, strain effect as well as electric-field modulation of superconductivity in FST films.

| S-EPMC4585655 | biostudies-literature

High critical current density and high-tolerance superconductivity in high-entropy alloy thin films.

Project description:High-entropy alloy (HEA) superconductors-a new class of functional materials-can be utilized stably under extreme conditions, such as in space environments, owing to their high mechanical hardness and excellent irradiation tolerance. However, the feasibility of practical applications of HEA superconductors has not yet been demonstrated because the critical current density (Jc) for HEA superconductors has not yet been adequately characterized. Here, we report the fabrication of high-quality superconducting (SC) thin films of Ta-Nb-Hf-Zr-Ti HEAs via a pulsed laser deposition. The thin films exhibit a large Jc of >1 MA cm-2 at 4.2 K and are therefore favorable for SC devices as well as large-scale applications. In addition, they show extremely robust superconductivity to irradiation-induced disorder controlled by the dose of Kr-ion irradiation. The superconductivity of the HEA films is more than 1000 times more resistant to displacement damage than that of other promising superconductors with technological applications, such as MgB2, Nb3Sn, Fe-based superconductors, and high-Tc cuprate superconductors. These results demonstrate that HEA superconductors have considerable potential for use under extreme conditions, such as in aerospace applications, nuclear fusion reactors, and high-field SC magnets.

| S-EPMC9188561 | biostudies-literature

Substrate mediated nitridation of niobium into superconducting Nb<sub>2</sub>N thin films for phase slip study.

Project description:Here we report a novel nitridation technique for transforming niobium into hexagonal Nb2N which appears to be superconducting below 1K. The nitridation is achieved by high temperature annealing of Nb films grown on Si3N4/Si (100) substrate under high vacuum. The structural characterization directs the formation of a majority Nb2N phase while the morphology shows granular nature of the films. The temperature dependent resistance measurements reveal a wide metal-to-superconductor transition featuring two distinct transition regions. The region close to the normal state varies strongly with the film thickness, whereas, the second region in the vicinity of the superconducting state remains almost unaltered but exhibiting resistive tailing. The current-voltage characteristics also display wide transition embedded with intermediate resistive states originated by phase slip lines. The transition width in current and the number of resistive steps depend on film thickness and they both increase with decrease in thickness. The broadening in transition width is explained by progressive establishment of superconductivity through proximity coupled superconducting nano-grains while finite size effects and quantum fluctuation may lead to the resistive tailing. Finally, by comparing with Nb control samples, we emphasize that Nb2N offers unconventional superconductivity with promises in the field of phase slip based device applications.

| S-EPMC6584497 | biostudies-literature

Study of the Influence of Zirconium, Titanium and Strontium on the Properties and Microstructure of AlSi7Mg0.3Cu0.5 Alloy.

Project description:The aim of the paper is to describe and specify the properties and microstructure of Al-Si alloy using Zr, a combination of Zr with elements used in the grafting of Al (Ti) alloys, and modification (Sr). Al-Si alloys with a combination of Zr and Ti and Sr elements represent an opportunity for the development of new aluminum alloys with a specific use. The experiment focused on the analysis of the synergistic effects of Zr with Ti and Zr with Sr on a AlSi7Mg0.3Cu0.5 alloy. The experimental alloys contained a constant Zr content of 0.15 wt. % and were alloyed with a gradual addition of Ti and Sr in the range of 0.1 to 0.3 wt. % for Ti, and 0.1 to 0.3 wt. % for Sr. The experimental samples were cast by meltable model casting technology. In variants with a constant addition of Zr 0.15 wt. % and a gradual addition of Ti, we observed an increase in the values of mechanical characteristics, with a significant decrease in ductility. When evaluating the structure of experimental alloys, Ti affected it by increasing the number of precipitated Zr phases. Experimental alloys with Zr and Sr addition were characterized by nucleation of Zr phases in angular morphology. It can be concluded that the investigated elements are expected to have a positive (strengthening) effect even at higher operating temperatures.

| S-EPMC9144254 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data