Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fluid Flow and Mixing Induced by AC Continuous Electrowetting of Liquid Metal Droplet

ABSTRACT: In this work, we proposed a novel design of a microfluidic mixer utilizing the amplified Marangoni chaotic advection induced by alternating current (AC) continuous electrowetting of a metal droplet situated in electrolyte solution, due to the linear and quadratic voltage-dependence of flow velocity at small or large voltages, respectively. Unlike previous researchers exploiting the unidirectional surface stress with direct current (DC) bias at droplet/medium interface for pumping of electrolytes where the resulting flow rate is linearly proportional to the field intensity, dominance of another kind of dipolar flow pattern caused by local Marangoni stress at the drop surface in a sufficiently intense AC electric field is demonstrated by both theoretical analysis and experimental observation, which exhibits a quadratic growth trend as a function of the applied voltage. The dipolar shear stress merely appears at larger voltages and greatly enhances the mixing performance by inducing chaotic advection between the neighboring laminar flow. The mixer design developed herein, on the basis of amplified Marangoni chaotic advection around a liquid metal droplet at larger AC voltages, has great potential for chemical reaction and microelectromechanical systems (MEMS) actuator applications because of generating high-throughput and excellent mixing performance at the same time.

SUBMITTER: Hu Q

PROVIDER: S-EPMC6190310 | biostudies-literature | 2017 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Continuous Droplet-Actuating Platforms via an Electric Field Gradient: Electrowetting and Liquid Dielectrophoresis.

Project description:This work develops a technology for actuating droplets of any size without the requirement for high voltages or active control systems, which are typically found in competitive systems. The droplet actuation relies on two microelectrodes separated by a variable gap distance to generate an electrostatic gradient. The physical mechanism for the droplet motion is a combination of liquid dielectrophoresis and electrowetting. Investigating the system behavior as a function of the driving frequency identified the relative contribution of these two mechanisms and the optimum operating conditions. A fixed signal frequency of 0.5 kHz actuated various liquids and contaminants. Droplet actuation was demonstrated on several platforms, including linear, radial-symmetric, and bilateral-symmetric droplet motion. The electrode designs are scalable and can be fabricated on a flexible and optically transparent substrate: these key advancements will enable consumer applications that were previously inaccessible. A self-cleaning platform was also tested under laboratory conditions and on the road. This technology has significant potential in microfluidics and self-cleaning platforms, for example, in the automotive sector to clean body parts, camera covers, and sensors.

| S-EPMC8397340 | biostudies-literature

Electrically Induced Liquid Metal Droplet Bouncing.

Project description:Liquid metals, including eutectic gallium-indium (EGaIn), have been explored for various planar droplet operations, including droplet splitting and merging, promoting their use in emerging areas such as flexible electronics and soft robotics. However, three-dimensional (3D) droplet operations, including droplet bouncing, have mostly been limited to nonmetallic liquids or aqueous solutions. This is the first study of liquid metal droplet bouncing using continuous AC electrowetting through an analytical model, computational fluid dynamics simulation, and empirical validation to the best of our knowledge. We achieved liquid metal droplet bouncing with a height greater than 5 mm with an actuation voltage of less than 10 V and a frequency of less than 5 Hz. We compared the bouncing trajectories of the liquid metal droplet for different actuation parameters. We found that the jumping height of the droplet increases as the frequency of the applied AC voltage decreases and its amplitude increases until the onset of instability. Furthermore, we model the attenuation dynamics of consecutive bouncing cycles of the underdamped droplet bouncing system. This study embarks on controlling liquid metal droplet bouncing electrically, thereby opening a plethora of new opportunities utilizing 3D liquid metal droplet operations for numerous applications such as energy harvesting, heat transfer, and radio frequency (RF) switching.

| S-EPMC9178922 | biostudies-literature

Electrowetting on dielectric driven droplet resonance and mixing enhancement in parallel-plate configuration.

Project description:This study experimentally verifies that the mixing process in a droplet can be enhanced by driving the droplet at resonant frequencies and at alternating driving frequencies using a parallel-plate electrowetting on dielectric device. The mixing time, which is defined as the time required for reaching the well-mixed state, in a resonant droplet is found to be significantly shorter than that in a non-resonant droplet. Besides, it is also found that a higher driving potential leads to a better mixing effect, especially at resonant frequencies. Furthermore, when a droplet is driven by alternating two driving frequencies, especially two resonant frequencies, the mixing efficiency is found to be significantly enhanced for a specific alternating duration of these two frequencies.

| S-EPMC3365333 | biostudies-other

Molecular nanoshearing: an innovative approach to shear off molecules with AC-induced nanoscopic fluid flow.

Project description:Early diagnosis of disease requires highly specific measurement of molecular biomarkers from femto to pico-molar concentrations in complex biological (e.g., serum, blood, etc.) samples to provide clinically useful information. While reaching this detection limit is challenging in itself, these samples contain numerous other non-target molecules, most of which have a tendency to adhere to solid surfaces via nonspecific interactions. Herein, we present an entirely new methodology to physically displace nonspecifically bound molecules from solid surfaces by utilizing a newly discovered "tuneable force", induced by an applied alternating electric field, which occurs within few nanometers of an electrode surface. This methodology thus offers a unique ability to shear-off loosely bound molecules from the solid/liquid interface. Via this approach, we achieved a 5-fold reduction in nonspecific adsorption of non-target protein molecules and a 1000-fold enhancement for the specific capture of HER2 protein in human serum.

| S-EPMC3893656 | biostudies-literature

An asymmetric flow-focusing droplet generator promotes rapid mixing of reagents.

Project description:Nowadays droplet microfluidics is widely used to perform high throughput assays and for the synthesis of micro- and nanoparticles. These applications usually require packaging several reagents into droplets and their mixing to start a biochemical reaction. For rapid mixing microfluidic devices usually require additional functional elements that make their designs more complex. Here we perform a series of 2D numerical simulations, followed by experimental studies, and introduce a novel asymmetric flow-focusing droplet generator, which enhances mixing during droplet formation due to a 2D or 3D asymmetric vortex, located in the droplet formation area of the microfluidic device. Our results suggest that 2D numerical simulations can be used for qualitative analysis of two-phase flows and droplet generation process in quasi-two-dimensional devices, while the relative simplicity of such simulations allows them to be easily applied to fairly complicated microfluidic geometries. Mixing inside droplets formed in the asymmetric generator occurs up to six times faster than in a conventional symmetric one. The best mixing efficiency is achieved in a specific range of droplet volumes, which can be changed by scaling the geometry of the device. Thus, the droplet generator suggested here can significantly simplify designs of microfluidic devices because it enables both the droplet formation and fast mixing of the reagents within droplets. Moreover, it can be used to precisely estimate reaction kinetics.

| S-EPMC8062447 | biostudies-literature

Modelling of Electrowetting-Induced Droplet Detachment and Jumping over Topographically Micro-Structured Surfaces.

Project description:Detachment and jumping of liquid droplets over solid surfaces under electrowetting actuation are of fundamental interest in many microfluidic and heat transfer applications. In this study we demonstrate the potential capabilities of our continuum-level, sharp-interface modelling approach, which overcomes some important limitations of convectional hydrodynamic models, when simulating droplet detachment and jumping dynamics over flat and micro-structured surfaces. Preliminary calculations reveal a considerable connection between substrate micro-topography and energy efficiency of the process. The latter results could be extended to the optimal design of micro-structured solid surfaces for electrowetting-induced droplet removal in ambient conditions.

| S-EPMC8224045 | biostudies-literature

Electrowetting on liquid-infused film (EWOLF): complete reversibility and controlled droplet oscillation suppression for fast optical imaging.

Project description:Electrowetting on dielectric (EWOD) has emerged as a powerful tool to electrically manipulate tiny individual droplets in a controlled manner. Despite tremendous progress over the past two decades, current EWOD operating in ambient conditions has limited functionalities posing challenges for its applications, including electronic display, energy generation, and microfluidic systems. Here, we demonstrate a new paradigm of electrowetting on liquid-infused film (EWOLF) that allows for complete reversibility and tunable transient response simultaneously. We determine that these functionalities in EWOLF are attributed to its novel configuration, which allows for the formation of viscous liquid-liquid interfaces as well as additional wetting ridges, thereby suppressing the contact line pinning and severe droplet oscillation encountered in the conventional EWOD. Finally, by harnessing these functionalities demonstrated in EWOLF, we also explore its application as liquid lens for fast optical focusing.

| S-EPMC4213809 | biostudies-literature

Contactless Fluid Manipulation in Air: Droplet Coalescence and Active Mixing by Acoustic Levitation.

Project description:Acoustic manipulation by an ultrasonic phased array provides an entirely new approach to processes such as coalescence, mixing, separation, and evaporation occurring in the generation of new materials, physical property measurement, the biomedical industry, etc. However, to date, ultrasonic phased arrays have not been fully investigated for applications in fluid manipulation. This paper provides contactless coalescence and mixing techniques for droplets in air by controlling the acoustic potential by using an ultrasonic phased array. We focused on mode oscillation to propose an efficient mixing technique for liquid without contact. A comparison of mixing performance between cases with mode oscillation and without mode oscillation showed that the flow induced by mode oscillation promotes droplet mixing. Our paper demonstrates the feasibility of contactless coalescence and mixing as a first step in fluid manipulation with a phased array.

| S-EPMC6033947 | biostudies-literature

Capacitance Effects of a Hydrophobic-Coated Ion Gel Dielectric on AC Electrowetting.

Project description:We present experimental studies of alternating current (AC) electrowetting dominantly influenced by several unique characteristics of an ion gel dielectric in its capacitance. At a high-frequency region above 1 kHz, the droplet undergoes the contact angle modification. Due to its high-capacitance characteristic, the ion gel allows the contact angle change as large as Δθ = 26.4°, more than 2-fold improvement, compared to conventional dielectrics when f = 1 kHz. At the frequency range from 1 to 15 kHz, the capacitive response of the gel layer dominates and results in a nominal variation in the angle change as θ ≈ 90.9°. Above 15 kHz, such a capacitive response of the gel layer sharply decreases and leads to the drastic increase in the contact angle. At a low-frequency region below a few hundred Hz, the droplet's oscillation relying on the AC frequency applied was mainly observed and oscillation performance was maximized at corresponding resonance frequencies. With the high-capacitance feature, the ion gel significantly enlarges the oscillation performance by 73.8% at the 1st resonance mode. The study herein on the ion gel dielectric will help for various AC electrowetting applications with the benefits of mixing enhancement, large contact angle modification, and frequency-independent control.

| S-EPMC8003088 | biostudies-literature

Electric Field-Driven Liquid Metal Droplet Generation and Direction Manipulation.

Project description:A gallium-based liquid metal got high attention recently, due to the excellent material properties that are useful in various research areas. We report here on electric field-induced liquid metal droplet generation and falling direction manipulation. The well-analyzed electro-hydrodynamic method is a selectable way to control the liquid metal, as the liquid metal is conductive. The electric field-induced liquid metal manipulation can be affected by the flow rate (0.05~0.2 mL/min), voltage (0~7 kV), and distance (15 and 30 mm) between electrodes, which changes the volume of the electric field-induced generated liquid metal droplet and the number of the generated droplets. When the electric field intensity increases or the flow rate increases, the generated droplet volume decreases, and the number of droplets increases. With the highest voltage of 7 kV with 15 mm between electrodes at the 0.2 mL/min flow rate, the lowest volume and the largest number of the generated droplets for 10 s were ~10 nL and 541, respectively. Additionally, we controlled the direction of the generated droplet by changing the electric field. The direction of the liquid metal droplet was controlled with the maximum angle of ~12°. Moreover, we exhibited a short circuit demonstration by controlling the volume or falling direction of the generated liquid metal droplet with an applied electric field.

| S-EPMC8471384 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data