Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data on liquid gated CNT network FETs on flexible substrates.

ABSTRACT: This article presents the raw and analyzed data from a set of experiments performed to study the role of junctions on the electrostatic gating of carbon nanotube (CNT) network field effect transistor (FET) aptasensors. It consists of the raw data used for the calculation of junction and bundle densities and describes the calculation of metallic content of the bundles. In addition, the data set consists of the electrical measurement data in a liquid gated environment for 119 different devices with four different CNT densities and summarizes their electrical properties. The data presented in this article are related to research article titled "Metallic-semiconducting junctions create sensing hot-spots in carbon nanotube FET aptasensors near percolation" (doi:10.1016/j.bios.2018.09.021) [1].

SUBMITTER: Thanihaichelvan M

PROVIDER: S-EPMC6197376 | biostudies-literature | 2018 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data on liquid gated CNT network FETs on flexible substrates.

Thanihaichelvan Murugathas M Browning Leo A LA Dierkes Marissa P MP Reyes Roger Martinez RM Kralicek Andrew V AV Carraher Colm C Marlow Colleen A CA Plank Natalie O V NOV

Data in brief 20181002

This article presents the raw and analyzed data from a set of experiments performed to study the role of junctions on the electrostatic gating of carbon nanotube (CNT) network field effect transistor (FET) aptasensors. It consists of the raw data used for the calculation of junction and bundle densities and describes the calculation of metallic content of the bundles. In addition, the data set consists of the electrical measurement data in a liquid gated environment for 119 different devices wit ...[more]

PMID: 30364623

Similar Datasets

Porous honeycomb structures formed from interconnected MnO2 sheets on CNT-coated substrates for flexible all-solid-state supercapacitors.

Project description:The use of lightweight and easily-fabricated MnO2/carbon nanotube (CNT)-based flexible networks as binder-free electrodes and a polyvinyl alcohol/H2SO4 electrolyte for the formation of stretchable solid-state supercapacitors was examined. The active electrodes were fabricated from 3D honeycomb porous MnO2 assembled from cross-walled and interconnected sheet-architectural MnO2 on CNT-based plastic substrates (denoted as honeycomb MnO2/CNT textiles).These substrates were fabricated through a simple two-step procedure involving the coating of multi-walled carbon nanotubes (MWCNTs) onto commercial textiles by a dipping-drying process and subsequent electrodeposition of the interconnected MnO2 sheets onto the MWCNT-coated textile. With such unique MnO2 architectures integrated onto CNT flexible films, good performance was achieved with a specific capacitance of 324 F/g at 0.5 A/g. A maximum energy density of 7.2 Wh/kg and a power density as high as 3.3 kW/kg were exhibited by the honeycomb MnO2/CNT network device, which is comparable to the performance of other carbon-based and metal oxide/carbon-based solid-state supercapacitor devices. Specifically, the long-term cycling stability of this material is excellent, with almost no loss of its initial capacitance and good Coulombic efficiency of 82% after 5000 cycles. These impressive results identify these materials as a promising candidate for use in environmentally friendly, low-cost, and high-performance flexible energy-storage devices.

| S-EPMC4750103 | biostudies-other

Low-Temperature Deposition of Highly Conductive Aluminum Metal Films on Flexible Substrates Using Liquid Alane MOD Precursors.

Project description:Metal-organic decomposition (MOD) precursor inks are emerging as the new route to low-temperature deposition of highly conductive metals, owing to the tunability of their decomposition. New methods of printing are being investigated to help negate the progressive issues of the electronics industry, not least the movement toward low-cost polymers and paper substrates. Informed precursor design is crucial if achieving materials capable of this is possible. In this work, the liquid MOD precursors, dimethylethylamine alane (DMEAA) and trimethylamine alane (TEAA), have been used to deposit a highly conductive aluminum (Al) metal with resistivities in the range of 4.10 × 10-5 to 5.32 × 10-7 Ω m (mean electrical resistivity of 8 × 10-6 Ω m, approximately 300 times more resistive than bulk Al metal), without the need for an additional solvent, at low temperatures (100 and 120 °C), on a range of substrates including glass, polyimide, polyethylene terephthalate, and paper. Conductive coatings have been analyzed using X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and resistivity measurements; as a proof of concept, Al deposited on paper has been used in an electrical circuit. Results indicate that DMEAA is a better precursor, producing more conductive films, which is explained by its lower decomposition temperature and higher Al weight loading, indicating potential for significant industrial application.

| S-EPMC7303966 | biostudies-literature

Magnetic nanoarrays on flexible substrates.

Project description:AbstractIn this work, we used nanosphere lithography to fabricate large area 2-D magnetic nanoparticle (MNP) arrays on a flexible polyimide substrate (Kapton). Samples were fabricated by assembling polystyrene (PS) spheres on thin films of Co capped with Au. Etched PS spheres were used to mask Co-Au particle arrays. The MNP arrays were subjected to superconducting quantum interference device measurements; flat samples (10 nm Co coated with 10 nm Au) exhibited an M s of 117.3 emu g-1, which was lower than the reported literature value for bulk Co (162.7 emu g-1). When compared to the flat film, coercivity, H c, increased in a linear fashion with respect to particle size. These preliminary results reveal that future investigations of the magnetic properties on flexible substrates should account for residual Co remaining in the polymeric material, the unique MNP shape, the effect of order (or lack or order) of the 2D array, and positioning with respect to the direction of the magnetic field.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1557/s43580-021-00193-z.

| S-EPMC8783782 | biostudies-literature

Tough and flexible CNT-polymeric hybrid scaffolds for engineering cardiac constructs.

Project description:In the past few years, a considerable amount of effort has been devoted toward the development of biomimetic scaffolds for cardiac tissue engineering. However, most of the previous scaffolds have been electrically insulating or lacked the structural and mechanical robustness to engineer cardiac tissue constructs with suitable electrophysiological functions. Here, we developed tough and flexible hybrid scaffolds with enhanced electrical properties composed of carbon nanotubes (CNTs) embedded aligned poly(glycerol sebacate):gelatin (PG) electrospun nanofibers. Incorporation of varying concentrations of CNTs from 0 to 1.5% within the PG nanofibrous scaffolds (CNT-PG scaffolds) notably enhanced fiber alignment and improved the electrical conductivity and toughness of the scaffolds while maintaining the viability, retention, alignment, and contractile activities of cardiomyocytes (CMs) seeded on the scaffolds. The resulting CNT-PG scaffolds resulted in stronger spontaneous and synchronous beating behavior (3.5-fold lower excitation threshold and 2.8-fold higher maximum capture rate) compared to those cultured on PG scaffold. Overall, our findings demonstrated that aligned CNT-PG scaffold exhibited superior mechanical properties with enhanced CM beating properties. It is envisioned that the proposed hybrid scaffolds can be useful for generating cardiac tissue constructs with improved organization and maturation.

| S-EPMC4114042 | biostudies-literature

Polymer Stabilized Liquid Crystal Smart Window with Flexible Substrates Based on Low-Temperature Treatment of Polyamide Acid Technology.

Project description:Polymer stabilized liquid crystal (PSLC) devices can be used as smart privacy windows that switch between transparent and opaque states. The polyimide alignment layer of a PSLC device is usually obtained by the treatment of polyamide acid (PAA) with temperatures over 200 °C. This hinders the fabrication of PSLC devices on flexible substrates, which melt at these high temperatures. In this work, the fabrication of a PSLC alignment layer using a lower temperature that is compatible with most flexible substrates, is demonstrated. It was found that the treatment of PAA at 150 °C could generate the same alignment for liquid crystals. Based on this, a PSLC device was successfully fabricated on a flexible polyethylene terephthalate (PET) substrate, demonstrating excellent electro-optic performances.

| S-EPMC6918311 | biostudies-literature

Side-Gated In<sub>2</sub>O<sub>3</sub> Nanowire Ferroelectric FETs for High-Performance Nonvolatile Memory Applications.

Project description:A new type of ferroelectric FET based on the single nanowire is demonstrated. The design of the side-gated architecture not only simplifies the manufacturing process but also avoids any postdeposition damage to the organic ferroelectric film. The devices exhibit excellent performances for nonvolatile memory applications, and the memory hysteresis can be effectively modulated by adjusting the side-gate geometries.

| S-EPMC5039971 | biostudies-literature

A nucleotide-gated molecular pore selects sulfotransferase substrates.

Project description:Human SULT2A1 is one of two predominant sulfotransferases in liver and catalyzes transfer of the sulfuryl moiety (-SO(3)) from activated sulfate (PAPS, 3'-phosphoadenosine 5-phosphosulfate) to hundreds of acceptors (metabolites and xenobiotics). Sulfation recodes the biologic activity of acceptors by altering their receptor interactions. The molecular basis on which these enzymes select and sulfonate specific acceptors from complex mixtures of competitors in vivo is a long-standing issue in the SULT field. Raloxifene, a synthetic steroid used in the prevention of osteoporosis, and dehydroepiandrosterone (DHEA), a ubiquitous steroid precusor, are reported to be sulfated efficiently by SULT2A1 in vitro, yet unlike DHEA, raloxifene is not sulfated in vivo. This selectivity was explored in initial rate and equilibrium binding studies that demonstrate pronounced binding antisynergy (21-fold) between PAPS and raloxifene, but not DHEA. Analysis of crystal structures suggests that PAP binding restricts access to the acceptor-binding pocket by restructuring a nine-residue segment of the pocket edge that constricts the active site opening, or "pore", that sieves substrates on the basis of their geometries. In silico docking predicts that raloxifene, which is considerably larger than DHEA, can bind only to the unliganded (open) enzyme, whereas DHEA binds both the open and closed forms. The predictions of these structures with regard to substrate binding are tested using equilibrium and pre-steady-state ligand binding studies, and the results confirm that a nucleotide-driven isomerization controls access to the acceptor-binding pocket and plays an important role in substrate selection by SULT2A1 and possibly other sulfotransferases.

| S-EPMC3448010 | biostudies-literature

Flexible CNT-array double helices Strain Sensor with high stretchability for Motion Capture.

Project description:Motion capture is attracting more and more attention due to its potential wide applications in various fields. However, traditional methods for motion capture still have weakness such as high cost and space consuming. Based on these considerations, a flexible, highly stretchable strain sensor with high gauge factor for motion capture is fabricated with carbon nanotube (CNT) array double helices as the main building block. Ascribed to the unique flexible double helical CNT-array matrix, the strain sensor is able to measure strain up to 410%, with low hysteresis. Moreover, a demonstration of using this strain sensor for capture hand motion and to control a mechanical hand in real time is also achieved. A model based on finite difference method is also made to help understand the mechanism of the strain sensors. Our work demonstrates that strain sensors can measure very large strain while maintaining high sensitivity, and the motion capture based on this strain sensor is expected to be less expensive, more convenient and accessible.

| S-EPMC4632108 | biostudies-literature

Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding.

Project description:Lightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g-1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

| S-EPMC8187523 | biostudies-literature

Introduction of Rare-Earth Oxide Nanoparticles in CNT-Based Nanocomposites for Improved Detection of Underlying CNT Network.

Project description:Epoxy resins for adhesive and structural applications are widely employed by various industries. The introduction of high aspect ratio nanometric conductive fillers, i.e., carbon nanotubes, are well studied and are known to improve the electrical properties of the bulk material by orders of magnitude. This improved electrical conductivity has made carbon nanotube-based nanocomposites an attractive material for applications where their weight savings are at a premium. However, the analytical methods for validating carbon nanotube (CNT) nanofiller dispersion and for assuring that the properties they induce extend to the entire volume are destructive and inhibited by poor resolution between matrix and tube bundles. Herein, rare-earth oxide nanoparticles are synthesized on CNT walls for the purpose of increasing the contrast between their network and the surrounding matrix when studied by imaging techniques, alleviating these issues. The adherence of the synthesized nanoparticles to the CNT walls is documented via transmission electron microscopy. The crystalline phases generated during the various fabrication steps are determined using X-ray diffraction. Deep ultraviolet-induced fluorescence of the Eu:Y2O3-CNT nanostructures is verified. The impacts to nanocomposite electrical properties resulting from dopant introduction are characterized. The scanning electron microscopy imaging of CNT pulp and nanocomposites fabricated from untreated CNTs and Eu:Y2O3-CNTs are compared, resulting in improved contrast and detection of CNT bundles. The micro-CT scans of composites with similar results are presented for discussion.

| S-EPMC8469966 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data