Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

CuCr₂O₄@rGO Nanocomposites as High-Performance Cathode Catalyst for Rechargeable Lithium-Oxygen Batteries.

ABSTRACT: Rechargeable lithium-oxygen batteries have been considered as a promising energy storage technology because of their ultra-high theoretical energy densities which are comparable to gasoline. In order to improve the electrochemical properties of lithium-oxygen batteries (LOBs), especially the cycling performance, a high-efficiency cathode catalyst is the most important component. Hence, we aim to demonstrate that CuCr₂O₄@rGO (CCO@rGO) nanocomposites, which are synthesized using a facile hydrothermal method and followed by a series of calcination processes, are an effective cathode catalyst. The obtained CCO@rGO nanocomposites which served as the cathode catalyst of the LOBs exhibited an outstanding cycling performance for over 100 cycles with a fixed capacity of 1000 mAh g^-1 at a current density of 200 mA g^-1. The enhanced properties were attributed to the synergistic effect between the high catalytic efficiency of the spinel-structured CCO nanoparticles, the high specific surface area, and high conductivity of the rGO.

SUBMITTER: Liu J

PROVIDER: S-EPMC6199065 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Bifunctional Organic Redox Catalyst for Rechargeable Lithium-Oxygen Batteries with Enhanced Performances.

Project description:An organic bifunctional catalyst poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) (PTMA) has been prepared and coated on carbon surface during electrode preparation. The PTMA has been applied as an efficient bifunctional catalyst for lithium-oxygen batteries with lower overpotentials, enhanced rate performances, and prolonged cycle life.

| S-EPMC5064662 | biostudies-literature

Ruthenium nanocrystals as cathode catalysts for lithium-oxygen batteries with a superior performance.

Project description:The key factor to improve the electrochemical performance of Li-O? batteries is to find effective cathode catalysts to promote the oxygen reduction and oxygen evolution reactions. Herein, we report the synthesis of an effective cathode catalyst of ruthenium nanocrystals supported on carbon black substrate by a surfactant assisting method. The as-prepared ruthenium nanocrystals exhibited an excellent catalytic activity as cathodes in Li-O? batteries with a high reversible capacity of about 9,800 mAh g?¹, a low charge-discharge over-potential (about 0.37 V), and an outstanding cycle performance up to 150 cycles (with a curtaining capacity of 1,000 mAh g?¹). The electrochemical testing shows that ruthenium nanocrystals can significantly reduce the charge potential comparing to carbon black catalysts, which demonstrated that ruthenium based nanomaterials could be effective cathode catalysts for high performance lithium- O? batteries.

| S-EPMC3718194 | biostudies-literature

Two dimensional (2D) reduced graphene oxide (RGO)/hexagonal boron nitride (h-BN) based nanocomposites as anodes for high temperature rechargeable lithium-ion batteries.

Project description:With lithium-ion (li-ion) batteries as energy storage devices, operational safety from thermal runaway remains a major obstacle especially for applications in harsh environments such as in the oil industry. In this approach, a facile method via microwave irradiation technique (MWI) was followed to prepare Co3O4/reduced graphene oxide (RGO)/hexagonal boron nitride (h-BN) nanocomposites as anodes for high temperature li-ion batteries. Results showed that the addition of h-BN not only enhanced the thermal stability of Co3O4/RGO nanocomposites but also enhanced the specific surface area. Co3O4/RGO/h-BN nanocomposites displayed the highest specific surface area of 191 m2/g evidencing the synergistic effects between RGO and h-BN. Moreover, Co3O4/RGO/h-BN also displayed the highest specific capacity with stable reversibility on the high performance after 100 cycles and lower internal resistance. Interestingly, this novel nanocomposite exhibits outstanding high temperature performances with excellent cycling stability (100% capacity retention) and a decreased internal resistance at 150 °C.

| S-EPMC7002573 | biostudies-literature

Advanced TexSy-C Nanocomposites for High-Performance Lithium Ion Batteries.

Project description:This study is dedicated to expand the family of lithium-tellurium sulfide batteries, which have been recognized as a promising choice for future energy storage systems. Herein, a novel electrochemical method has been applied to engineer micro-nano TexSy material, and it is found that TexSy phases combined with multi-walled carbon nanotubes endow the as-constructed lithium-ion batteries excellent cycling stability and high rate performance. In the process of material synthesis, the sulfur was successfully embedded into the tellurium matrix, which improved the overall capacity performance. TexSy was characterized and verified as a micro-nano-structured material with less Te and more S. Compared with the original pure Te particles, the capacity is greatly improved, and the volume expansion change is effectively inhibited. After the assembly of Li-TexSy battery, the stable electrical contact and rapid transport capacity of lithium ions, as well as significant electrochemical performance are verified.

| S-EPMC8186662 | biostudies-literature

Heteroaromatic organic compound with conjugated multi-carbonyl as cathode material for rechargeable lithium batteries.

Project description:The heteroaromatic organic compound, N,N'-diphenyl-1,4,5,8-naphthalenetetra- carboxylic diimide (DP-NTCDI-250) as the cathode material of lithium batteries is prepared through a simple one-pot N-acylation reaction of 1,4,5,8-naphthalenetetra-carboxylic dianhydride (NTCDA) with phenylamine (PA) in DMF solution followed by heat treatment in 250?°C. The as prepared sample is characterized by the combination of elemental analysis, NMR, FT-IR, TGA, XRD, SEM and TEM. The electrochemical measurements show that DP-NTCDI-250 can deliver an initial discharge capacity of 170?mAh g(-1) at the current density of 25?mA g(-1). The capacity of 119?mAh g(-1) can be retained after 100 cycles. Even at the high current density of 500?mA g(-1), its capacity still reaches 105?mAh g(-1), indicating its high rate capability. Therefore, the as-prepared DP-NTCDI-250 could be a promising candidate as low cost cathode materials for lithium batteries.

| S-EPMC4827395 | biostudies-literature

δ-MnO2 nanoflower/graphite cathode for rechargeable aqueous zinc ion batteries.

Project description:Manganese oxide (MnO2) is one of the most promising intercalation cathode materials for zinc ion batteries (ZIBs). Specifically, a layered type delta manganese dioxide (δ-MnO2) allows reversible insertion/extraction of Zn2+ ions and exhibits high storage capacity of Zn2+ ions. However, a poor conductivity of δ-MnO2, as well as other crystallographic forms, limits its potential applications. This study focuses on δ-MnO2 with nanoflower structure supported on graphite flake, namely MNG, for use as an intercalation host material of rechargeable aqueous ZIBs. Pristine δ-MnO2 nanoflowers and MNG were synthesized and examined using X-ray diffraction, electron spectroscopy, and electrochemical techniques. Also, performances of the batteries with the pristine δ-MnO2 nanoflowers and MNG cathodes were studied in CR2032 coin cells. MNG exhibits a fast insertion/extraction of Zn2+ ions with diffusion scheme and pseudocapacitive behavior. The battery using MNG cathode exhibited a high initial discharge capacity of 235 mAh/g at 200 mA/g specific current density compared to 130 mAh/g which is displayed by the pristine δ-MnO2 cathode at the same specific current density. MNG demonstrated superior electrical conductivity compared to the pristine δ-MnO2. The results obtained pave the way for improving the electrical conductivity of MnO2 by using graphite flake support. The graphite flake support significantly improved performances of ZIBs and made them attractive for use in a wide variety of energy applications.

| S-EPMC6560026 | biostudies-literature

Upcycling Real Waste Mixed Lithium-Ion Batteries by Simultaneous Production of rGO and Lithium-Manganese-Rich Cathode Material.

Project description:The direct synthesis of high-value products from end-of-life Li-ion batteries (LIBs), avoiding the complex and costly separation of the different elements, can be reached through a competitive recycling strategy. Here, we propose the simultaneous synthesis of reduced graphene oxide (rGO) and lithium-manganese-rich (Li1.2Mn0.55Ni0.15Co0.1O2 - LMR) cathode material from end-of-life LIBs. The electrode powder recovered after LIBs mechanical pretreatment was directly subjected to the Hummers' method. This way, quantitative extraction of the target metals (Co, Ni, Mn) and oxidation of graphite to graphene oxide (GO) were simultaneously achieved, and a Mn-rich metal solution resulted after GO filtration, owing to the use of KMnO4 as an oxidizing agent. This solution, which would routinely constitute a heavy-metal liquid waste, was directly employed for the synthesis of Li1.2Mn0.55Ni0.15Co0.1O2 cathode material. XPS measurements demonstrate the presence in the synthesized LMR of Cu2+, SO4 2-, and SiO4 4- impurities, which were previously proposed as effective doping species and can thus explain the improved electrochemical performance of recovered LMR. The GO recovered by filtration was reduced to rGO by using ascorbic acid. To evaluate the role of graphite lithiation/delithiation during battery cycling on rGO production, the implemented synthesis procedure was replicated starting from commercial graphite and from the graphite recovered by a consolidated acidic-reductive leaching procedure for metals extraction. Raman and XPS analysis disclosed that cyclic lithiation/delithiation of graphite during battery life cycle facilitates the graphite exfoliation and thus significantly increases conversion to rGO.

| S-EPMC8493547 | biostudies-literature

Nanoscale Lithium Quantification in LiXNiyCowMnZO2 as Cathode for Rechargeable Batteries.

Project description:Time-of-flight secondary ion mass spectrometry (TOF-SIMS) using a focused ion-beam scanning electron microscope (FIB-SEM) is a promising and economical technique for lithium detection and quantification in battery materials because it overcomes the limitations with detecting low Li content by energy dispersive spectroscopy (EDS). In this work, an experimental calibration curve was produced, which to our best knowledge allowed for the first time, the quantification of lithium in standard nickel manganese cobalt oxide (NMC-532) cathodes using 20?nm resolution. The technique overcomes matrix effects and edges effects that makes quantification complex. This work shows the high potential of TOF-SIMS tool for analytical characterization of battery materials, and demonstrates its tremendous capabilities towards identification of various chemical or electrochemical phenomena in the cathodes via high-resolution ion distributions. Various phenomena in the ion distributions are also assessed, such as edge effects or measurement artifacts from real signal variations.

| S-EPMC6279772 | biostudies-literature

RGO-Coated TiO2 Microcones for High-Rate Lithium-Ion Batteries.

Project description:Reduced graphene oxide (RGO)-coated TiO2 microcones have been synthesized via simple anodization and cyclic voltammetry for use in lithium-ion batteries (LIBs). Microcones had a perpendicularly oriented hollow core, an anatase structure, and a high surface area, allowing higher capacity than other nanosized TiO2 structures. TiO2 has low electrical conductivity, leading to the limitation of fast charging and high capacity; however, this was improved by the application of an RGO coating in this work. As anode materials of LIB, the obtained RGO microcone showed a capacity of 157 mAh g-1 at 10C (fully charged within ∼360 s) and sustained 1000 cycles with only 0.02% capacity fading per cycle. The capacity was 1.5 times higher than that of conventional microcone. We speculated that the decrease in the charge-transfer resistance (R ct) played a crucial role in increasing the capacity with fast charging.

| S-EPMC6644754 | biostudies-literature

Light Rechargeable Lithium-Ion Batteries Using V2O5 Cathodes.

Project description:Solar energy is one of the most actively pursued renewable energy sources, but like many other sustainable energy sources, its intermittent character means solar cells have to be connected to an energy storage system to balance production and demand. To improve the efficiency of this energy conversion and storage process, photobatteries have recently been proposed where one of the battery electrodes is made from a photoactive material that can directly be charged by light without using solar cells. Here, we present photorechargeable lithium-ion batteries (Photo-LIBs) using photocathodes based on vanadium pentoxide nanofibers mixed with P3HT and rGO additives. These photocathodes support the photocharge separation and transportation process needed to recharge. The proposed Photo-LIBs show capacity enhancements of more than 57% under illumination and can be charged to ∼2.82 V using light and achieve conversion efficiencies of ∼2.6% for 455 nm illumination and ∼0.22% for 1 sun illumination.

| S-EPMC8155332 | biostudies-literature