Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Edge-Dependent Electronic and Magnetic Characteristics of Freestanding β ₁₂-Borophene Nanoribbons.

ABSTRACT: This work presents an investigation of nanoribbons cut from β ₁₂-borophene sheets by applying the density functional theory. In particular, the electronic and magnetic properties of borophene nanoribbons (BNR) are studied. It is found that all the ribbons considered in this work behave as metals, which is in good agreement with the recent experimental results. β ₁₂-BNR has significant diversity due to the existence of five boron atoms in a unit cell of the sheet. The magnetic properties of the ribbons are strongly dependent on the cutting direction and edge profile. It is interesting that a ribbon with a specific width can behave as a normal or a ferromagnetic metal with magnetization at just one edge or two edges. Spin anisotropy is observed in some ribbons, and the magnetic moment is not found to be the same in both edges in an antiferromagnetic configuration. This effect stems from the edge asymmetry of the ribbons and results in the breaking of spin degeneracy in the band structure. Our findings show that β ₁₂ BNRs are potential candidates for next-generation spintronic devices.

SUBMITTER: Izadi Vishkayi S

PROVIDER: S-EPMC6199070 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Geometric and electronic properties of edge-decorated graphene nanoribbons.

Project description:Edge-decorated graphene nanoribbons are investigated with the density functional theory; they reveal three stable geometric structures. The first type is a tubular structure formed by the covalent bonds of decorating boron or nitrogen atoms. The second one consists of curved nanoribbons created by the dipole-dipole interactions between two edges when decorated with Be, Mg, or Al atoms. The final structure is a flat nanoribbon produced due to the repulsive force between two edges; most decorated structures belong to this type. Various decorating atoms, different curvature angles, and the zigzag edge structure are reflected in the electronic properties, magnetic properties, and bonding configurations. Most of the resulting structures are conductors with relatively high free carrier densities, whereas a few are semiconductors due to the zigzag-edge-induced anti-ferromagnetism.

| S-EPMC4133719 | biostudies-literature

Fine-Tuning the Optoelectronic Properties of Freestanding Borophene by Strain.

Project description:Two-dimensional boron (borophene) is a promising, newly synthesized monolayer metal with promising electronic and optical properties. Borophene has only been recently synthesized on silver substrates, and displays a variety of crystal structures and substrate-induced strains depending on the growth conditions and surface orientation. Here, we present an extensive first-principles study of the structural and optoelectronic properties of the two proposed structures of borophene, β12 and δ6, under strain. With a density functional theory analysis, we determine that the optical absorbance and electronic band structure are continuously tunable upon application of few percent of strain. Although both structures remain metallic with moderate strains of up to 6% applied, key features of the band structure, as well as the inplane anisotropy of the complex dielectric function and optical absorption, can be significantly modified.

| S-EPMC6645144 | biostudies-literature

Diverse Electronic and Magnetic Properties of Chlorination-Related Graphene Nanoribbons.

Project description:The dramatic changes in electronic and magnetic properties are investigated using the first-principles calculations for halogen(X: Cl, Br, I, At)-adsorbed graphene nanoribbons. The rich and unique features are clearly revealed in the atoms-dominated electronic band structures, spin arrangement/magnetic moment, spatial charge distribution, and orbital- and spin-projected density of states. Halogen adsorptions can create the non-magnetic, ferromagnetic or anti-ferromagnetic metals, being mainly determined by concentrations and edge structures. The number of holes per unit cell increases with the adatom concentrations. Furthermore, magnetism becomes nonmagnetic when the adatom concentration is beyond 60% adsorption. There are many low-lying spin-dependent van Hove singularities. The diversified properties are attributed to the significant X-C bonds, the strong X-X bonds, and the adatom- and edge-carbon-induced spin states.

| S-EPMC6294761 | biostudies-literature

The Edge Stresses and Phase Transitions for Magnetic BN Zigzag Nanoribbons.

Project description:The edge states are of particular importance to understand fundamental properties of finite two-dimensional (2D) crystals. Based on first-principles calculations, we investigated on the bare zigzag boron nitride nanoribbons (zzBNNRs) with different spin-polarized states well localized at and extended along their edges. Our calculations examined the edge stress, which is sensitively dependent on the magnetic edge states, for either B-terminated edge or N-terminated edge. Moreover, we revealed that different magnetic configurations lead to a rich spectrum of electronic behaviors at edges. Using an uniaxial tensile strain, we proposed the magnetic phase transitions and thereby obtained the metallic to half-metallic (or reverse) phase transitions at edges. It suggests zzBNNR as a promising candidate for potential applications of non-metal spintronic devices.

| S-EPMC5552777 | biostudies-other

Electronic structures of WS2 armchair nanoribbons doped with transition metals.

Project description:Armchair WS2 nanoribbons are semiconductors with band gaps close to 0.5 eV. If some of the W atoms in the ribbon are replaced by transition metals, the impurity states can tremendously affect the overall electronic structure of the doped ribbon. By using first-principles calculations based on density functional theory, we investigated substitutional doping of Ti, V, Cr, Mn, Fe, and Co at various positions on WS2 ribbons of different widths. We found that Fe-doped ribbons can have two-channel conduction in the middle segment of the ribbon and at the edges, carrying opposite spins separately. Many Co-doped ribbons are transformed into spin filters that exhibit 100% spin-polarized conduction. These results will be useful for spintronics and nanoelectronic circuit design.

| S-EPMC7536224 | biostudies-literature

Adsorption Behavior of Toxic Carbon Dichalcogenides (CX2; X = O, S, or Se) on β12 Borophene and Pristine Graphene Sheets: A DFT Study.

Project description:The adsorption of toxic carbon dichalcogenides (CX2; X = O, S, or Se) on β12 borophene (β12) and pristine graphene (GN) sheets was comparatively investigated. Vertical and parallel configurations of CX2⋯β12/GN complexes were studied herein via density functional theory (DFT) calculations. Energetic quantities confirmed that the adsorption process in the case of the parallel configuration was more desirable than that in the vertical analog and showed values up to -10.96 kcal/mol. The strength of the CX2⋯β12/GN complexes decreased in the order CSe2 > CS2 > CO2, indicating that β12 and GN sheets showed significant selectivity for the CSe2 molecule with superb potentiality for β12 sheets. Bader charge transfer analysis revealed that the CO2⋯β12/GN complexes in the parallel configuration had the maximum negative charge transfer values, up to -0.0304 e, outlining the electron-donating character of CO2. The CS2 and CSe2 molecules frequently exhibited dual behavior as electron donors in the vertical configuration and acceptors in the parallel one. Band structure results addressed some differences observed for the electronic structures of the pure β12 and GN sheets after the adsorption process, especially in the parallel configuration compared with the vertical one. According to the results of the density of states, new peaks were observed after adsorbing CX2 molecules on the studied 2D sheets. These results form a fundamental basis for future studies pertaining to applications of β12 and GN sheets for detecting toxic carbon dichalcogenides.

| S-EPMC9565509 | biostudies-literature

Controllable conversion of quasi-freestanding polymer chains to graphene nanoribbons.

Project description:In the bottom-up synthesis of graphene nanoribbons (GNRs) from self-assembled linear polymer intermediates, surface-assisted cyclodehydrogenations usually take place on catalytic metal surfaces. Here we demonstrate the formation of GNRs from quasi-freestanding polymers assisted by hole injections from a scanning tunnelling microscope (STM) tip. While catalytic cyclodehydrogenations typically occur in a domino-like conversion process during the thermal annealing, the hole-injection-assisted reactions happen at selective molecular sites controlled by the STM tip. The charge injections lower the cyclodehydrogenation barrier in the catalyst-free formation of graphitic lattices, and the orbital symmetry conservation rules favour hole rather than electron injections for the GNR formation. The created polymer-GNR intraribbon heterostructures have a type-I energy level alignment and strongly localized interfacial states. This finding points to a new route towards controllable synthesis of freestanding graphitic layers, facilitating the design of on-surface reactions for GNR-based structures.

| S-EPMC5355836 | biostudies-literature

Edge Contacts to Atomically Precise Graphene Nanoribbons.

Project description:Bottom-up-synthesized graphene nanoribbons (GNRs) are an emerging class of designer quantum materials that possess superior properties, including atomically controlled uniformity and chemically tunable electronic properties. GNR-based devices are promising candidates for next-generation electronic, spintronic, and thermoelectric applications. However, due to their extremely small size, making electrical contact with GNRs remains a major challenge. Currently, the most commonly used methods are top metallic electrodes and bottom graphene electrodes, but for both, the contact resistance is expected to scale with overlap area. Here, we develop metallic edge contacts to contact nine-atom-wide armchair GNRs (9-AGNRs) after encapsulation in hexagonal boron-nitride (h-BN), resulting in ultrashort contact lengths. We find that charge transport in our devices occurs via two different mechanisms: at low temperatures (9 K), charges flow through single GNRs, resulting in quantum dot (QD) behavior with well-defined Coulomb diamonds (CDs), with addition energies in the range of 16 to 400 meV. For temperatures above 100 K, a combination of temperature-activated hopping and polaron-assisted tunneling takes over, with charges being able to flow through a network of 9-AGNRs across distances significantly exceeding the length of individual GNRs. At room temperature, our short-channel field-effect transistor devices exhibit on/off ratios as high as 3 × 105 with on-state current up to 50 nA at 0.2 V. Moreover, we find that the contact performance of our edge-contact devices is comparable to that of top/bottom contact geometries but with a significantly reduced footprint. Overall, our work demonstrates that 9-AGNRs can be contacted at their ends in ultra-short-channel FET devices while being encapsulated in h-BN.

| S-EPMC10569104 | biostudies-literature

Electronic Structures of Penta-SiC2 and g-SiC3 Nanoribbons: A First-Principles Study.

Project description:The dimensions of nanoribbons have a significant impact on their material properties. In the fields of optoelectronics and spintronics, one-dimensional nanoribbons exhibit distinct advantages due to their low-dimensional and quantum restrictions. Novel structures can be formed by combining silicon and carbon at different stoichiometric ratios. Using density functional theory, we thoroughly explored the electronic structure properties of two kinds of silicon-carbon nanoribbons (penta-SiC2 and g-SiC3 nanoribbons) with different widths and edge conditions. Our study reveals that the electronic properties of penta-SiC2 and g-SiC3 nanoribbons are closely related to their width and orientation. Specifically, one type of penta-SiC2 nanoribbons exhibits antiferromagnetic semiconductor characteristics, two types of penta-SiC2 nanoribbons have moderate band gaps, and the band gap of armchair g-SiC3 nanoribbons oscillates in three dimensions with the width of the nanoribbon. Notably, zigzag g-SiC3 nanoribbons exhibit excellent conductivity, high theoretical capacity (1421 mA h g-1), moderate open circuit voltage (0.27 V), and low diffusion barriers (0.09 eV), making them a promising candidate for high storage capacity electrode material in lithium-ion batteries. Our analysis provides a theoretical basis for exploring the potential of these nanoribbons in electronic and optoelectronic devices as well as high-performance batteries.

| S-EPMC10254421 | biostudies-literature

Ultra-flexibility and unusual electronic, magnetic and chemical properties of waved graphenes and nanoribbons.

Project description:Two-dimensional materials have attracted increasing attention because of their particular properties and potential applications in next-generation nanodevices. In this work, we investigate the physical and chemical properties of waved graphenes/nanoribbons based on first-principles calculations. We show that waved graphenes are compressible up to a strain of 50% and ultra-flexible because of the vanishing in-plane stiffness. The conductivity of waved graphenes is reduced due to charge decoupling under high compression. Our analysis of pyramidalization angles predicts that the chemistry of waved graphenes can be easily controlled by modulating local curvatures. We further demonstrate that band gaps of armchair waved graphene nanoribbons decrease with the increase of compression if they are asymmetrical in geometry, while increase if symmetrical. For waved zigzag nanoribbons, their anti-ferromagnetic states are strongly enhanced by increasing compression. The versatile functions of waved graphenes enable their applications in multi-functional nanodevices and sensors.

| S-EPMC3935201 | biostudies-other