Bi2Se3/C Nanocomposite as a New Sodium-Ion Battery Anode Material.
Ontology highlight
ABSTRACT:
SUBMITTER: Xie L
PROVIDER: S-EPMC6199094 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Sodium ion batteries are being considered as an alternative to lithium ion batteries in large-scale energy storage applications owing to the low cost. A novel titanate compound, NaAlTi3O8, was successfully synthesized and tested as a promising anode material for sodium ion batteries. Powder X-ray Diffraction (XRD) and refinement were used to analyze the crystal structure. Electrochemical cycling tests under a C/10 rate between 0.01 - 2.5 V showed that ~83 mAh/g capacity could be achieved in the second cycle, with ~75% of which retained after 100 cycles, which corresponds to 0.75 Na+ insertion and extraction. The influence of synthesis conditions on electrochemical performances was investigated and discussed. NaAlTi3O8 not only presents a new anode material with low average voltage of ~0.5 V, but also provides a new type of intercalation anode with a crystal structure that differentiates from the anodes that have been reported.
| S-EPMC5427963 | biostudies-literature
Project description:Binary mixed transition-based metal oxides have some of the most potential as anode materials for rechargeable advanced battery systems due to their high theoretical capacity and tremendous electrochemical performance. Nonetheless, binary metal oxides still endure low electronic conductivity and huge volume expansion during the charge/discharge processes. In this study, we synthesized a reduced graphene oxide (rGO)-wrapped CoV2O4 material as the anode for sodium ion batteries. The X-ray diffraction analyses revealed pure-phased CoV2O4 (CVO) rGO-wrapped CoV2O4 (CVO/rGO) nanoparticles. The capacity retention of the CVO/rGO composite anode demonstrated 81.6% at the current density of 200 mA/g for more than 1000 cycles, which was better than that of the bare one of only 73.5% retention. The as-synthesized CVO/rGO exhibited remarkable cyclic stability and rate capability. The reaction mechanism of the CoV2O4 anode with sodium ions was firstly studied in terms of cyclic voltammetry (CV) and ex situ XRD analyses. These results articulated the manner of utilizing the graphene oxide-coated spinel-based novel anode-CoV2O4 as a potential anode for sodium ion batteries.
| S-EPMC7182827 | biostudies-literature
Project description:Transition metal dichalcogenide materials have been considered as promising anode materials for rechargeable sodium-ion batteries because of their high specific capacity and low cost. Here, we demonstrate an iron sulfide Fe3S4 as a new anode material for a rechargeable sodium-ion battery. The involved conversion mechanism has been proved when the as-prepared Fe3S4 was used as the host material for sodium storage. Remarkably, a compound FeS x with quantum size generated by conversion reaction overcame the kinetic and thermodynamic constraints of chemical conversion to achieve superior cycling and rate capability. As a result, the as-prepared Fe3S4 electrode delivers a high reversible specific capacity of 548 mA h g-1 at 0.2 A g-1, together with an excellent cycling stability of 275 mA h g-1 after 3500 cycles at 20 A g-1.
| S-EPMC5308403 | biostudies-literature
Project description:High performance batteries based on the movement of Li ions in Li x CoO2 have made possible a revolution in mobile electronic technology, from laptops to mobile phones. However, the scarcity of Li and the demand for energy storage for renewables has led to intense interest in Na-ion batteries, including structurally-related Na x CoO2. Here we have determined the diffusion mechanism for Na0.8CoO2 using diffuse x-ray scattering, quasi-elastic neutron scattering and ab-initio molecular dynamics simulations, and we find that the sodium ordering provides diffusion pathways and governs the diffusion rate. Above T ~ 290?K the so-called partially disordered stripe superstructure provides channels for quasi-1D diffusion, and melting of the sodium ordering leads to 2D superionic diffusion above T ~ 370?K. We obtain quantitative agreement between our microscopic study of the hopping mechanism and bulk self-diffusion measurements. Our approach can be applied widely to other Na- or Li-ion battery materials.
| S-EPMC5816598 | biostudies-literature
Project description:Bismuth oxide directly grown on nickel foam (p-Bi2O3/Ni) was prepared by a facile polymer-assisted solution approach and was used directly as a lithium-ion battery anode for the first time. The Bi2O3 particles were covered with thin carbon layers, forming network-like sheets on the surface of the Ni foam. The binder-free p-Bi2O3/Ni shows superior electrochemical properties with a capacity of 668 mAh/g at a current density of 800 mA/g, which is much higher than that of commercial Bi2O3 powder (c-Bi2O3) and Bi2O3 powder prepared by the polymer-assisted solution method (p-Bi2O3). The good performance of p-Bi2O3/Ni can be attributed to higher volumetric utilization efficiency, better connection of active materials to the current collector, and shorter lithium ion diffusion path.
| S-EPMC3884641 | biostudies-literature
Project description:There is an ever-increasing demand for rechargeable batteries with fast charging, long cycling, high safety, and low cost in new energy storage systems. Herein, a heterogeneous architecture composed of MoS2-coupled carbon nanosheets encapsulated on sodium titanate nanowires is developed and demonstrated as an advanced anode for sodium-ion batteries (SIBs). Owing to the synergistic effects of ultrastable substrate of 1D sodium titanate (NTO) nanowires, high-capacity promoter of 2D MoS2 nanosheets as well as the 2D conductive carbon matrix, the resulting 1D/2D-2D hybrid demonstrates excellent high-rate capacity and super-durable cyclability, delivering a stable capacity of up to 425.5 mAh g-1 at 200 mA g-1. Even at an ultrafast charging/discharging process within 80 s, the capacity can be maintained at 201 mAh g-1 after 16 000 cycles with only 0.0012% capacity loss per cycle, one of the best high-rate capacities and cyclabilities for NTO-based hybrid composites. The present work highlights the designing protocol of hierarchical nanoarchitectures with stable substrate and high-capacity electrodes for next-generation energy storage applications.
| S-EPMC6523371 | biostudies-literature
Project description:In this work, three-dimensional (3D) CoMoSe4 nanosheet arrays on network fibers of a carbon cloth denoted as CoMoSe4@C converted directly from CoMoO4 nanosheet arrays prepared by a hydrothermal process followed by the plasma-assisted selenization at a low temperature of 450?°C as an anode for sodium-ion battery (SIB) were demonstrated for the first time. With the plasma-assisted treatment on the selenization process, oxygen (O) atoms can be replaced by selenium (Se) atoms without the degradation on morphology at a low selenization temperature of 450?°C. Owing to the high specific surface area from the well-defined 3D structure, high electron conductivity, and bi-metal electrochemical activity, the superior performance with a large sodium-ion storage of 475?mA?h?g-1 under 0.5-3?V potential range at 0.1?A?g-1 was accomplished by using this CoMoSe4@C as the electrode. Additionally, the capacity retention was well maintained over 80 % from the second cycle, exhibiting a satisfied capacity of 301?mA?h?g-1 even after 50?cycles. The work delivered a new approach to prepare a binary transition metallic selenide and definitely enriches the possibilities for promising anode materials in SIBs with high performances.
| S-EPMC6593019 | biostudies-literature
Project description:The increase in energy density of the next generation of battery materials to meet the new challenges of the electrical vehicles era calls for innovative and easily scalable materials with sustainable processes. An innovative Cu x O/C nanocomposite material, characterized by a highly conductive 3D-framework, with Cu x O/Cu-metal contiguous nanodomains is prepared by electrospinning. The electrode processing is made using a polyacrylic acid binder. The nanocomposite has been fully characterized and the electrochemical performance shows high specific capacity values over 450 galvanostatic cycles at 500 mAg-1 specific current with capacity retention values over 80?%. In addition, the composite shows remarkable high rate performance and highly stable interface, which has been studied by impedance spectroscopy.
| S-EPMC6594352 | biostudies-literature
Project description:Carbon coated TiO2 (TiO2@C) is fabricated by a convenient and green one-pot solvothermal method, in which ethylene glycol serve as both the reaction medium and carbon source without the addition of any other carbon additives. During the solvothermal process, ethylene glycol polymerize and coordinate with Ti4+ to form the polymeric ligand precursor, then the polymer brushes carbonize and convert to homogeneous carbon layer firmly anchored on the TiO2 nanoparticles (~1?nm thickness). The polymerization and carbonization process of the ethylene glycol is confirmed by FT-IR, Raman, TG and TEM characterizations. Benefiting from the well-dispersed nanoparticles and uniform carbon coating, the as-prepared TiO2@C demonstrate a high reversible capacity of 317?mAh g-1 (94.6% of theoretical value), remarkable rate capability of 125?mAh g-1 at 3.2?A g-1 and superior cycling stability over 500 cycles, possibly being one of the highest capacities reported for TiO2.
| S-EPMC5335553 | biostudies-literature
Project description:Germanium is an outstanding anode material in terms of electrochemical performance, especially rate capability, but its developments are hindered by its high price because it is rare in the crust of earth, and its huge volume variation during the lithium insertion and extraction. Introducing other cheaper elements into the germanium-based material is an efficient way to dilute the high price, but normally sacrifice its electrochemical performance. By the combination of nanostructure design and cheap element (calcium) introduction, urchin-like Ca2Ge7O16 hierarchical hollow microspheres have been successfully developed in order to reduce the price and maintain the good electrochemical properties of germanium-based material. The electrochemical test results in different electrolytes show that ethylene carbonate/dimethyl carbonate/diethyl carbonate (3/4/3 by volume) with 5 wt% fluoroethylene carbonate additive is the most suitable solvent for the electrolyte. From the electrochemical evaluation, the as-synthesized Ca2Ge7O16 hollow microspheres exhibit high reversible specific capacity of up to 804.6 mA h g(-1) at a current density of 100 mA g(-1) after 100 cycles and remarkable rate capability of 341.3 mA h g(-1) at a current density of 4 A g(-1). The growth mechanism is proposed based on our experimental results on the growth process.
| S-EPMC4462153 | biostudies-literature