Dataset Information

Fabrication of Bifunctional Chitosan-Based Flocculants: Characterization, Assessment of Flocculation, and Sterilization Performance.

ABSTRACT: In this study, a series of chitosan-based quaternary ammonium graft flocculants, namely chitosan-graft-poly(acrylamide and methacryloyl ethyl trimethyl ammonium chloride) [CTS-g-P(AM-DMC)], was successfully synthesized by plasma initiation, and the as-prepared [CTS-g-P(AM-DMC)] had both flocculation and sterilization functions. Various characterization techniques were used to study the structure and physicochemical properties of the chitosan-based flocculants. ¹H nuclear magnetic resonance spectroscopy (¹H NMR), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), and thermogravimetric analysis/differential scanning calorimetry (TG/DSC) confirmed the successful synthesis of CTS-g-P(AM-DMC). Scanning electron microscopy (SEM) analysis exhibited that CTS-g-P(AM-DMC) contained a smooth convex and porous structure with an enormous surface area. CTS-g-P(AM-DMC) was then used to flocculate the simulated wastewater of the kaolin suspension and the Salmonella suspension. Besides external factors, such as the dosage of flocculant and pH, the effect of the internal factor graft ratio was also evaluated. The experimental results showed that CTS-g-P(AM-DMC) also revealed a strong sterilization effect, aside from the excellent flocculation effect. Moreover, the sterilization mechanism was investigated through a series of conductivity measurements and the analysis of fluorescence-based cell live/dead tests. The results indicated that CTS-g-P(AM-DMC) destroyed the cell membrane of Salmonella through its grafted quaternary ammonium salt, thereby exhibiting sterilization property.

SUBMITTER: Wang M

PROVIDER: S-EPMC6213324 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Fabrication of Bifunctional Chitosan-Based Flocculants: Characterization, Assessment of Flocculation, and Sterilization Performance.

Wang Moxi M Feng Li L Fan Xiaowei X Li Dongmei D Qu Wenqi W Jiang Shuxian S Li Shaoxiu S

Materials (Basel, Switzerland) 20181017 10

In this study, a series of chitosan-based quaternary ammonium graft flocculants, namely chitosan-graft-poly(acrylamide and methacryloyl ethyl trimethyl ammonium chloride) [CTS-g-P(AM-DMC)], was successfully synthesized by plasma initiation, and the as-prepared [CTS-g-P(AM-DMC)] had both flocculation and sterilization functions. Various characterization techniques were used to study the structure and physicochemical properties of the chitosan-based flocculants. ¹H nuclear mag ...[more]

PMID: 30336604

Similar Datasets

Project description:In wastewater treatment, flocculation is a widely used solid/liquid separation technique, which typically employs a charged polymer, a polyelectrolyte (PEL). Polyelectrolytes features, such as charge type, charge density and molecular weight, are essential parameters affecting the mechanism of flocculation and subsequent floc sedimentation. The effectiveness of the process is also influenced by the characteristics of the system (e.g., type, size, and available surface area of suspended particles, pH of the medium, charge of suspended particles). Thus, a good understanding of the flocculation kinetics, involved mechanisms and flocs structure is essential in identifying the most adequate treatment conditions, having also into consideration possible subsequent treatments. In this study, Eucalyptus bleached pulp and a cellulosic pulp with high lignin content (~4.5 wt%) obtained from Eucalyptus wood waste were used for bio-PELs production. Firstly, a pre-treatment with sodium periodate increased the pulps reactivity. To produce cationic cellulose the oxidation step was followed by the introduction of cationic groups in the cellulose chains, through reaction with Girard's reagent T. Applying different molar ratios (0.975 and 3.9) of Girard's reagent T to aldehyde groups led to cationic PELs with diverse charge density. On the other hand, to obtain anionic cellulose a sulfonation reaction with sodium metabisulfite was applied to the intermediate dialdehyde cellulose-based products, during 24 or 72 h, and anionic-PELs with diverse features were obtained. The developed water soluble, anionic and cationic bio-PELs were characterized and tested as flocculation agents for a textile industry effluent treatment. Initially, jar-tests were used to tune the most effective flocculation procedure (pH, flocculant dosage, etc.). Flocculation using these conditions was then monitored continuously, over time, using laser diffraction spectroscopy (LDS). Due to the small size of the dyes molecules, a dual system with an inorganic complexation agent (bentonite) was essential for effective decolouration of the effluent. Performance in the treatment was monitored first by turbidity removal evaluation (75-88% with cationic-PELs, 75-81% with anionic-PELs) and COD reduction evaluation (79-81% with cationic-PELs, 63-77% with anionic-PELs) in the jar tests. Additionally, the evolution of flocs characteristics (structure and size) during their growth and the flocculation kinetics, were studied using the LDS technique, applying the different PELs produced and for a range of PEL concentration. The results obtained through this monitoring procedure allowed to discuss the possible flocculation mechanisms involved in the process. The results obtained with the bio-PELs were compared with those obtained using synthetic PELs, commonly applied in effluents treatment, polyacrylamides. The developed bio-PELs can be competitive, eco-friendly flocculation agents for effluents treatment from several industries, when compared to traditional synthetic flocculants with a significant environmental footprint. Moreover, LDS proved to be a feasible technique to monitor flocculation processes, even when a real industrial effluent is being tested.

Dataset Information

Fabrication of Bifunctional Chitosan-Based Flocculants: Characterization, Assessment of Flocculation, and Sterilization Performance.

Publications

Fabrication of Bifunctional Chitosan-Based Flocculants: Characterization, Assessment of Flocculation, and Sterilization Performance.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets