Dataset Information

Cathepsin K inhibition preserves compressive load in lumbar vertebrae of osteoporotic monkeys.

ABSTRACT: Anti-resorptive drugs treat bone loss by blocking osteoclast activity through a variety of mechanisms of action. Once significant bone loss has occurred, the ability to restore biomechanical function may differ based on the drug chosen. To assess this question, bisphosphonate (alendronate, ALN) and cathepsin K inhibitor (MK-0674, CatKi) were employed in treatment mode to compare the relative changes to cancellous bone microstructure and mechanical properties in ovariectomized (OVX) cynomolgus monkeys. Lumbar vertebrae (LV) bone mineral density (BMD) values taken two years post-surgery prior to drug treatment show a 10-15% decrease (p < 0.05) for all OVX animals. OVX animals were then treated with vehicle (VEH), ALN (0.03 mg/kg weekly), or CatKi MK-0674 (0.6 or 2.5 mg/kg daily, CatKi-L and H respectively) for two years and compared to a control Sham surgery group. Ex-vivo microcomputed tomography (μCT) of LV2 and compression testing of LV4-6 were used to measure cancellous bone microstructure and changes in bone mechanics, respectively. After two years of treatment, ALN-treated animals showed no significant difference in μCT or biomechanical parameters when compared to Veh. However, treatment with CatKi-H resulted in a 30% increase in yield and peak loads, and apparent peak and yield stress as compared to Veh (p < 0.05) and gave average mechanical values greater than the Sham sample. Treatment with CatKi-L exhibited a similar trend of increase to CatKi-H (p < 0.08). Intriguingly, these changes were realized despite no significant differences in mean values of trabecular bone morphologic parameters. Together these data suggest matrix-level changes in bone composition that are unique to the CatK inhibition mechanism, resulting in the preservation of bone compressive load with treatment.

SUBMITTER: Colon-Bernal ID

PROVIDER: S-EPMC6214835 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundPedicle screw insertion in osteoporotic patients is challenging. Achieving more screw-cortical bone purchase and invasiveness minimization, the cortical bone trajectory and the midline cortical techniques represent alternatives to traditional pedicle screws. This study compares the fatigue behavior and fixation strength of the cement-augmented traditional trajectory (TT), the cortical bone trajectory (CBT), and the midline cortical (MC).MethodsTen human cadaveric spine specimens (L1 - L5) were examined. The average age was 86.3 ± 7.2 years. CT scans were provided for preoperative planning. CBT and MC were implanted by using the patient-specific 3D-printed placement guide (MySpine®, Medacta International), TT were implanted freehand. All ten cadaveric specimens were randomized to group A (CBT vs. MC) or group B (MC vs. TT). Each screw was loaded for 10,000 cycles. The failure criterion was doubling of the initial screw displacement resulting from the compressive force (60 N) at the first cycle, the stop criterion was a doubling of the initial screw displacement. After dynamic testing, screws were pulled out axially at 5 mm/min to determine their remaining fixation strength.ResultsThe mean pull-out forces did not differ significantly. Concerning the fatigue performance, only one out of ten MC of group A failed prematurely due to loosening after 1500 cycles (L3). Five CBT already loosened during the first 500 cycles. The mean displacement was always lower in the MC. In group B, all TT showed no signs of failure or loosening. Three MC failed already after 26 cycles, 1510 cycles or 2144 cycles. The TT showed always a lower mean displacement. In the subsequent pull-out tests, the remaining mean fixation strength of the MC (449.6 ± 298.9 N) was slightly higher compared to the mean pull-out force of the CBT (401.2 ± 261.4 N). However, MC (714.5 ± 488.0 N) were inferior to TT (990.2 ± 451.9 N).ConclusionThe current study demonstrated that cement-augmented TT have the best fatigue and pull-out characteristics in osteoporotic lumbar vertebrae, followed by the MC and CBT. MC represent a promising alternative in osteoporotic bone if cement augmentation should be avoided. Using the patient-specific placement guide contributes to the improvement of screws' biomechanical properties.

Dataset Information

Cathepsin K inhibition preserves compressive load in lumbar vertebrae of osteoporotic monkeys.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets