Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Generalized Hartmann-Shack array of dielectric metalens sub-arrays for polarimetric beam profiling.

ABSTRACT: To define and characterize optical systems, obtaining the amplitude, phase, and polarization profile of optical beams is of utmost importance. Traditional polarimetry is well established to characterize the polarization state. Recently, metasurfaces have successfully been introduced as compact optical components. Here, we take the metasurface concept to the system level by realizing arrays of metalenses, allowing the determination of the polarization profile of an optical beam. We use silicon-based metalenses with a numerical aperture of 0.32 and a mean measured focusing efficiency in transmission mode of 28% at a wavelength of 1550 nm. Our system is extremely compact and allows for real-time beam diagnostics by inspecting the foci amplitudes. By further analyzing the foci displacements in the spirit of a Hartmann-Shack wavefront sensor, we can simultaneously detect phase-gradient profiles. As application examples, we diagnose the profiles of a radially polarized beam, an azimuthally polarized beam, and of a vortex beam.

SUBMITTER: Yang Z

PROVIDER: S-EPMC6214988 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Reconfigurable all-dielectric metalens with diffraction-limited performance.

Project description:Active metasurfaces, whose optical properties can be modulated post-fabrication, have emerged as an intensively explored field in recent years. The efforts to date, however, still face major performance limitations in tuning range, optical quality, and efficiency, especially for non-mechanical actuation mechanisms. In this paper, we introduce an active metasurface platform combining phase tuning in the full 2π range and diffraction-limited performance using an all-dielectric, low-loss architecture based on optical phase change materials (O-PCMs). We present a generic design principle enabling binary switching of metasurfaces between arbitrary phase profiles and propose a new figure-of-merit (FOM) tailored for reconfigurable meta-optics. We implement the approach to realize a high-performance varifocal metalens operating at 5.2 μm wavelength. The reconfigurable metalens features a record large switching contrast ratio of 29.5 dB. We further validate aberration-free and multi-depth imaging using the metalens, which represents a key experimental demonstration of a non-mechanical tunable metalens with diffraction-limited performance.

| S-EPMC7900249 | biostudies-literature

High-Efficiency, Broadband, Near Diffraction-Limited, Dielectric Metalens in Ultraviolet Spectrum.

Project description:Ultraviolet (UV) optical devices have plenteous applications in the fields of nanofabrication, military, medical, sterilization, and others. Traditional optical components utilize gradual phase accumulation phenomena to alter the wave-front of the light, making them bulky, expensive, and inefficient. A dielectric metasurface could provide an auspicious approach to precisely control the amplitude, phase, and polarization of the incident light by abrupt, discrete phase changing with high efficiency due to low absorption losses. Metalenses, being one of the most attainable applications of metasurfaces, can extremely reduce the size and complexity of the optical systems. We present the design of a high-efficiency transmissive UV metalens operating in a broadband range of UV light (250-400 nm) with outstanding focusing characteristics. The polarization conversion efficiency of the nano-rod unit and the focusing efficiency of the metasurface are optimized to be as high as 96% and 77%, respectively. The off-axis focusing characteristics at different incident angles are also investigated. The designed metalens that is composed of silicon nitride nanorods will significantly uphold the advancement of UV photonic devices and can provide opportunities for the miniaturization and integration of the UV nanophotonics and its applications.

| S-EPMC7153589 | biostudies-literature

Strain-Multiplex Metalens Array for Tunable Focusing and Imaging.

Project description:Metalenses on a flexible template are engineered metal-dielectric interfaces that improve conventional imaging system and offer dynamic focusing and zooming capabilities by controlling the focal length and bandwidth through a mechanical or external stretch. However, realizing large-scale and cost-effective flexible metalenses with high yields in a strain-multiplex fashion remains as a great challenge. Here, single-pulsed, maskless light interference and imprinting technique is utilized to fabricate reconfigurable, flexible metalenses on a large-scale and demonstrate its strain-multiplex tunable focusing. Experiments, in accordance with the theory, show that applied stretch on the flexible-template reconfigurable diffractive metalenses (FDMLs) accurately mapped focused wavefront, bandwidth, and focal length. The surface relief metastructures consisted of metal-coated hemispherical cavities in a hexagonal close-packed arrangement to enhance tunable focal length, numerical aperture, and fill factor, FF ≈ 100% through normal and angular light illumination with external stretch. The strain-multiplex of FDMLs approach lays the foundation of a new class of large-scale, cost-effective metalens offering tunable light focusing and imaging.

| S-EPMC7887606 | biostudies-literature

A broadband achromatic metalens array for integral imaging in the visible.

Project description:Integral imaging is a promising three-dimensional (3D) imaging technique that captures and reconstructs light field information. Microlens arrays are usually used for the reconstruction process to display 3D scenes to the viewer. However, the inherent chromatic aberration of the microlens array reduces the viewing quality, and thus, broadband achromatic imaging remains a challenge for integral imaging. Here, we realize a silicon nitride metalens array in the visible region that can be used to reconstruct 3D optical scenes in the achromatic integral imaging for white light. The metalens array contains 60 × 60 polarization-insensitive metalenses with nearly diffraction-limited focusing. The nanoposts in each high-efficiency (measured as 47% on average) metalens are delicately designed with zero effective material dispersion and an effective achromatic refractive index distribution from 430 to 780 nm. In addition, such an achromatic metalens array is composed of only a single silicon nitride layer with an ultrathin thickness of 400 nm, making the array suitable for on-chip hybrid-CMOS integration and the parallel manipulation of optoelectronic information. We expect these findings to provide possibilities for full-color and aberration-free integral imaging, and we envision that the proposed approach may be potentially applicable in the fields of high-power microlithography, high-precision wavefront sensors, virtual/augmented reality and 3D imaging.

| S-EPMC6804934 | biostudies-literature

Generalized Brewster effect in dielectric metasurfaces.

Project description:Polarization is a key property defining the state of light. It was discovered by Brewster, while studying light reflected from materials at different angles. This led to the first polarizers, based on Brewster's effect. Now, one of the trends in photonics is the study of miniaturized devices exhibiting similar, or improved, functionalities compared with bulk optical elements. In this work, it is theoretically predicted that a properly designed all-dielectric metasurface exhibits a generalized Brewster's effect potentially for any angle, wavelength and polarization of choice. The effect is experimentally demonstrated for an array of silicon nanodisks at visible wavelengths. The underlying physics is related to the suppressed scattering at certain angles due to the interference between the electric and magnetic dipole resonances excited in the nanoparticles. These findings open doors for Brewster phenomenon to new applications in photonics, which are not bonded to a specific polarization or angle of incidence.

| S-EPMC4735648 | biostudies-literature

Sub-25 nm Inorganic and Dielectric Nanopattern Arrays on Substrates: A Block Copolymer-Assisted Lithography.

Project description:A range of well-ordered inorganic (antimony, tin, and tungsten oxide) and dielectric (silica, alumina, and hafnia) nanoparticles and nanowire array patterns are created on substrates by a low-cost block copolymer (BCP) approach. A cylindrical-phase PS-b-PEO BCP is used as a template with hexagonally ordered perpendicular or parallel orientation of PEO cylinders. The solvent annealing parameters such as solvents, temperature, time, and so forth are optimized to achieve the desired patterns. An established BCP in situ inclusion protocol is utilized to achieve the material nanopatterns by spin coating the respective precursor ethanolic solution on the template followed by UV/ozone treatment for oxide conversion and polymer removal. Furthermore, the precursor solution concentrations and stirring times are calibrated to achieve isolated, well-ordered, and uniform-diameter and -thickness nanoparticles and nanowires. All of the material nanopatterns are mimicking the parent BCP nanopatterns. The phases of all of the nanopatterns are determined by X-ray photoelectron spectroscopy. The inorganic and dielectric nanopattern arrays are patterned on a graphoepitaxial substrate for device application.

| S-EPMC8717533 | biostudies-literature

Shack-Hartmann wavefront sensors based on 2D refractive lens arrays and super-resolution multi-contrast X-ray imaging.

Project description:Different approaches of 2D lens arrays as Shack-Hartmann sensors for hard X-rays are compared. For the first time, a combination of Shack-Hartmann sensors for hard X-rays (SHSX) with a super-resolution imaging approach to perform multi-contrast imaging is demonstrated. A diamond lens is employed as a well known test object. The interleaving approach has great potential to overcome the 2D lens array limitation given by the two-photon polymerization lithography. Finally, the radiation damage induced by continuous exposure of an SHSX prototype with a white beam was studied showing a good performance of several hours. The shape modification and influence in the final image quality are presented.

| S-EPMC7206553 | biostudies-literature

Improving dielectric nanoresonator array coatings for solar cells.

Project description:Antireflection coatings based on dielectric nanosphere arrays are discussed in application to photovoltaic materials including silicon and gallium arsenide. We perform macro- and nanoscale characterization and finite-difference time-domain calculations demonstrating the enhanced optoelectronic properties. A significant absorptivity enhancement is achieved due to the collective resonant coupling of excited whispering gallery-like modes and thin-film interference effects. The resonant coupling is masked in macroscale measurements by the size variation of nanospheres, but it is clearly seen through imaging photocurrent at the nanoscale with near-field scanning photocurrent microscopy. The resonant coupling can be effectively tuned by the material, configuration, or size of nanospheres. Hybrid coatings combining nanospheres of different materials yield the highest efficiency gain, more than 30 %. We also evaluate an impact of manufacturing defects such as double layer formation. While the performance degrades, the antireflection coating still offers marked improvement in comparison with bare cells.

| S-EPMC6512821 | biostudies-literature

Optimization-based Dielectric Metasurfaces for Angle-Selective Multifunctional Beam Deflection.

Project description:Synthesization of multiple functionalities over a flat metasurface platform offers a promising approach to achieving integrated photonic devices with minimized footprint. Metasurfaces capable of diverse wavefront shaping according to wavelengths and polarizations have been demonstrated. Here we propose a class of angle-selective metasurfaces, over which beams are reflected following different and independent phase gradients in the light of the beam direction. Such powerful feature is achieved by leveraging the local phase modulation and the non-local lattice diffraction via inverse scattered field and geometry optimization in a monolayer dielectric grating, whereas most of the previous designs utilize the local phase modulation only and operate optimally for a specific angle. Beam combiner/splitter and independent multibeam deflections with up to 4 incident angles are numerically demonstrated respectively at the wavelength of 700 nm. The deflection efficiency is around 45% due to the material loss and the compromise of multi-angle responses. Flexibility of the approach is further validated by additional designs of angle-switchable metagratings as splitter/reflector and transparent/opaque mirror. The proposed designs hold great potential for increasing information density of compact optical components from the degree of freedom of angle.

| S-EPMC5613029 | biostudies-literature

Low-Noise Dual-Band Polarimetric Image Sensor Based on 1D Bi<sub>2</sub> S<sub>3</sub> Nanowire.

Project description:With the increasing demand for detection accuracy and sensitivity, dual-band polarimetric image sensor has attracted considerable attention due to better object recognition by processing signals from diverse wavebands. However, the widespread use of polarimetric sensors is still limited by high noise, narrow photoresponse range, and low linearly dichroic ratio. Recently, the low-dimensional materials with intrinsic in-plane anisotropy structure exhibit the great potential to realize direct polarized photodetection. Here, strong anisotropy of 1D layered bismuth sulfide (Bi2 S3 ) is demonstrated experimentally and theoretically. The Bi2 S3 photodetector exhibits excellent device performance, which enables high photoresponsivity (32 A W-1 ), Ion /Ioff ratio (1.08 × 104 ), robust linearly dichroic ratio (1.9), and Hooge parameter (2.0 × 10-5 at 1 Hz) which refer to lower noise than most reported low-dimensional materials-based devices. Impressively, such Bi2 S3 nanowire exhibits a good broadband photoresponse, ranging from ultraviolet (360 nm) to short-wave infrared (1064 nm). Direct polarimetric imaging is implemented at the wavelengths of 532 and 808 nm. With these remarkable features, the 1D Bi2 S3 nanowires show great potential for direct dual-band polarimetric image sensors without using any external optical polarizer.

| S-EPMC8292854 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data