Dataset Information

Changes in propulsion technique and shoulder complex loading following low-intensity wheelchair practice in novices.

ABSTRACT:

Background

Up to 80% of wheelchair users are affected by shoulder pain. The Clinical Practice Guidelines for preservation of upper limb function following spinal cord injury suggest that using a proper wheelchair propulsion technique could minimize the shoulder injury risk. Yet, the exact relationship between the wheelchair propulsion technique and shoulder load is not well understood.

Objective

This study aimed to examine the changes in shoulder loading accompanying the typical changes in propulsion technique following 80 min of low-intensity wheelchair practice distributed over 3 weeks.

Methods

Seven able-bodied participants performed the pre- and the post-test and 56 min of visual feedback-based low-intensity wheelchair propulsion practice. Kinematics and kinetics of propulsion technique were recorded during the pre- and the post-test. A musculoskeletal model was used to calculate muscle force and glenohumeral reaction force.

Results

Participants decreased push frequency (51?36 pushes/min, p = 0.04) and increased contact angle (68?94°, p = 0.02) between the pre- and the post-test. The excursion of the upper arm increased, approaching significance (297?342 mm, p = 0.06). Range of motion of the hand, trunk and shoulder remained unchanged. The mean glenohumeral reaction force per cycle decreased by 13%, approaching significance (268?232 N, p = 0.06).

Conclusions

Despite homogenous changes in propulsion technique, the kinematic solution to the task varied among the participants. Participants exhibited two glenohumeral reaction force distribution patterns: 1) Two individuals developed high force at the onset of the push, leading to increased peak and mean glenohumeral forces 2) Five individuals distributed the force more evenly over the cycle, lowering both peak and mean glenohumeral forces.

SUBMITTER: Leving MT

PROVIDER: S-EPMC6226177 | biostudies-literature | 2018

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Changes in propulsion technique and shoulder complex loading following low-intensity wheelchair practice in novices.

Leving Marika T MT Vegter Riemer J K RJK de Vries Wiebe H K WHK de Groot Sonja S van der Woude Lucas H V LHV

PloS one 20181109 11

<h4>Background</h4>Up to 80% of wheelchair users are affected by shoulder pain. The Clinical Practice Guidelines for preservation of upper limb function following spinal cord injury suggest that using a proper wheelchair propulsion technique could minimize the shoulder injury risk. Yet, the exact relationship between the wheelchair propulsion technique and shoulder load is not well understood.<h4>Objective</h4>This study aimed to examine the changes in shoulder loading accompanying the typical c ...[more]

PMID: 30412627

Similar Datasets

Project description:The acquisition of daily handrim wheelchair propulsion skill as a multi-layered phenomenon has been studied in the past. Wheelchair racing, however, is considerably different from daily handrim wheelchair propulsion in terms of propulsion technique, as well as the underlying equipment and interface. Understanding wheelchair racing skill acquisition is important from a general motor learning and skill acquisition perspective, but also from a performance and injury prevention perspective. The aim of the current lab-based study was 2-fold: to investigate the evolution of racing wheelchair propulsion skill among a sample of novices and to compare them with an experienced wheelchair racer under similar conditions. A convenience sample of 15 able-bodied novices (8 male, 7 female) completed a standardized three-week submaximal uninstructed practice protocol (3 weeks, 3 sessions per week, 3x4 min per session) in a racing wheelchair on an ergometer. Required wheeling velocity was set at 2.78 m/s (10 km/h) and a rolling friction coefficient of 0.011 (resulting in a mean target load of 21W) was used. For comparison, an experienced T54 Paralympic athlete completed one block of the same protocol. Kinetics, kinematics, and physiological data were captured. A mixed effects regression analysis was used to examine the effect of practice for the novices, while controlling for speed. All participants finished the protocol successfully. However, not all participants were able to achieve the target speed during the first few sessions. Statistically significant improvements over time were found for all outcome measures (i.e., lower metabolic strain, longer push and cycle times) with the exception of mean power and torque per push. The athlete used a significantly greater contact angle and showed "better" outcomes on most metabolic and kinetic variables. While the athlete used a semi-circular propulsion technique, most participants used a double looping over technique. Three weeks of uninstructed wheelchair racing practice significantly improved efficiency and skill among a group of novices, in line with previous studies on daily handrim wheelchair propulsion. The comparison with an experienced athlete expectedly showed that there is still a large performance (and knowledge) gap to be conquered.

Project description:Objective: Shoulder pain after spinal cord injury (SCI) is attributed to increased mobility demands on the arms and negatively impacts independence and quality of life. Repetitive superior and posterior shoulder joint forces produced during traditional wheelchair (WC) locomotion can result in subacromial impingement if unopposed, as with muscular fatigue or weakness. ROWHEELS® (RW), geared rear wheels that produce forward WC movement with backward rim pulling, could alter these forces. Design: Cross sectional. Setting: Research laboratory at a rehabilitation hospital. Participants: Ten manual WC users with paraplegia. Outcome measures: Propulsion characteristics and right upper extremity/trunk kinematics and shoulder muscle activity were collected during ergometer propulsion: (1) self-selected free speed reverse propulsion with RW, (2) matched-speed reverse (rSW), and (3) forward propulsion (fSW) with instrumented Smartwheels (SW). Inverse dynamics using right-side SW rim kinetics and kinematics compared shoulder kinetics during rSW and fSW. Results: Free propulsion velocity, cycle distance and cadence were similar during RW, rSW and fSW. Overall shoulder motion was similar except that peak shoulder extension was significantly reduced in both RW and rSW versus fSW. Anteriorly and inferiorly directed SW rim forces were decreased during rSW versus fSW propulsion, but posteriorly and superiorly directed rim forces were significantly greater. Superior and posterior shoulder joint forces and flexor, adductor, and external rotation moments were significantly less during rSW, without a significant difference in net shoulder forces and moments. Traditional propulsive-phase muscle activity was significantly reduced and recovery-phase muscle activity was increased during reverse propulsion. Conclusion: These results suggest that reverse propulsion may redirect shoulder demands and prevent subacromial impingement, thereby preventing injury and preserving independent mobility for individuals with paraplegia.

Project description:To assess the association of age at pediatric-onset spinal cord injury (SCI) and years of manual wheelchair use with shoulder dynamics. Upper extremity kinematics and hand-rim kinetics were obtained during manual wheelchair propulsion. An inverse dynamics model computed three-dimensional acromioclavicular, sternoclavicular, and glenohumeral joint dynamics. Linear mixed effects models evaluated the association of age at injury onset and years of wheelchair use with shoulder dynamics. Motion laboratory within a children's hospital. Seventeen manual wheelchair users (N=17; 6 female, 11 male; mean age: 17.2 years, mean age at SCI onset: 11.5 years) with pediatric-onset SCI (levels: C4-T11) and International Standards for Neurological Classification of SCI grades: A (11), B (3), C (2), and N/A (2). Not applicable. Acromioclavicular, sternoclavicular, and glenohumeral angles and ranges of motion, and glenohumeral forces and moments. We observed a decrease in maximum acromioclavicular upward rotation (ß [95% confidence interval {CI}]=3.02 [0.15,5.89], P=.039) and an increase in acromioclavicular downward/upward rotation range of motion (ß [95% CI]=0.44 [0.08,0.80], P=.016) with increasing age at SCI onset. We found interactions between age at onset and years of use for maximum glenohumeral abduction (ß [95% CI]=0.16 [0.03,0.29], P=.017), acromioclavicular downward/upward rotation range of motion (ß [95% CI]=-0.05 [-0.09,-0.01], P=.008), minimum acromioclavicular upward rotation (ß [95% CI]=-0.34 [-0.64,-0.04], P=.026). A decrease in glenohumeral internal rotation moment (ß [95% CI]=-0.09 [-0.17,-0.009], P=.029) with increasing years of use was found. Age at injury and the years of wheelchair use are associated with shoulder complex biomechanics during wheelchair propulsion. These results are noteworthy, as both age at SCI onset and years of wheelchair use are considered important factors in the incidence of shoulder pain. These results suggest that investigations of biomechanical changes over the lifespan are critical.

Project description:ObjectiveThis study aimed to identify targets of intervention for reducing shoulder pain in wheelchair users with spinal cord injury (SCI) by (1) examining changes in subacromial space [acromiohumeral distance (AHD) and occupation ratio (OccRatio)] with fatiguing wheelchair propulsion, and different loading conditions [unloaded position vs. weight relief lifts (WRL)]; (2) associating these changes with wheelchair user capacity, as well as (3) identifying subject characteristics associated with subacromial space, such as sex, lesion level, time since injury, body mass index and impaired shoulder range of motion.MethodsFifty manual wheelchair users with SCI [11 females, age = 50.5 (9.7) years, time since injury = 26.2 (11.4) years] participated in this quasi-experimental one-group pretest-posttest study. Ultrasound images were used to define AHD during an unloaded position, and during personal and instructed WRL before and after fatiguing wheelchair propulsion. Furthermore, supraspinatus and biceps thickness defined from ultrasound images were used to calculate OccRatios. Wheelchair user capacity was quantified as functional strength (maximum resultant force reached during maximum isometric forward push) and anaerobic work capacity (highest power output reached during 15-m sprint test). Multilevel mixed-effects linear regression analyses controlling for between subject variability and covariables were performed to address the research questions.ResultsAHD was significantly smaller during personal WRL (p < 0.001) and instructed WRL (p = 0.009, AHD both 11.5 mm) compared to the unloaded position (11.9 mm). A higher wheelchair user capacity (higher anaerobic work capacity) reduced the impact of WRL on AHD decrease. The fatiguing wheelchair propulsion had no effect on AHD (p = 0.570) and on OccRatio of supraspinatus (p = 0.404) and biceps (p = 0.448). Subject characteristics related to a larger subacromial space were lower lesion level, shorter time since injury, impaired external rotation, a lower body mass index and a higher anaerobic work capacity.ConclusionThis study showed a significant reduction in AHD during WRL with no effect of fatiguing wheelchair propulsion on the subacromial space in wheelchair users with SCI. A higher anaerobic work capacity was beneficial in stabilizing the shoulder during WRL. Our findings may assist clinicians in designing a shoulder injury prevention program.

Dataset Information

Changes in propulsion technique and shoulder complex loading following low-intensity wheelchair practice in novices.

Background

Objective

Methods

Results

Conclusions

Publications

Changes in propulsion technique and shoulder complex loading following low-intensity wheelchair practice in novices.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets