Dataset Information

Structural and compositional study of precipitates in under-aged Cu-added Al-Mg-Si alloy.

ABSTRACT: Atomic scale characterization of fine precipitates in an under-aged Cu added Al-Mg-Si alloy was carried out by combination of atomically-resolved annular dark-field scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. Two types of precipitates were observed in the alloy. In the case of ordered ?" precipitates, ?" was proposed as Mg_5-xAl_2+xSi₄ (x ? 1) with solute Cu atoms replacing Al site of ?" precipitate. In the case of disordered precipitates, the precipitates were found to consist of ?" sub-unit cells, three-fold symmetric structure without Cu atoms, Cu containing structures termed as "Cu sub-unit cluster", and Q' sub-unit cells. Among these structures, the morphologies of three-fold symmetric structure without Cu atoms, Cu sub-unit cluster, and Q' sub-unit cell were almost the same, so that these structures should be the clusters of Q' phase. Since the areal density, length and diameter of precipitates were almost equal between Cu free Al-Mg-Si alloy and Cu added Al-Mg-Si alloy, the increase of hardness by Cu addition should be due to the precipitation of Cu related precipitates, such as Cu sub-unit clusters and Q' sub-unit cells.

SUBMITTER: Maeda T

PROVIDER: S-EPMC6226491 | biostudies-literature | 2018 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Structural and compositional study of precipitates in under-aged Cu-added Al-Mg-Si alloy.

Maeda Takuya T Kaneko Kenji K Namba Takuya T Koshino Yuki Y Sato Yukio Y Teranishi Ryo R Aruga Yasuhiro Y

Scientific reports 20181109 1

Atomic scale characterization of fine precipitates in an under-aged Cu added Al-Mg-Si alloy was carried out by combination of atomically-resolved annular dark-field scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. Two types of precipitates were observed in the alloy. In the case of ordered β" precipitates, β" was proposed as Mg5-xAl2+xSi4 (x ≈ 1) with solute Cu atoms replacing Al site of β" precipitate. In the case of disordered ...[more]

PMID: 30413757

Similar Datasets

Project description:Al-Mg-Si series aluminum alloy is a heat-treatment-strengthened alloy. Research on the impact resistance of Al-Mg-Si series aluminum alloy is of great significance to expand its application in engineering. Taking 6082-T6 aluminum alloy as the concrete research object, using the split Hopkinson pressure bar (SHPB) device, the dynamic mechanical response of the material under different temperatures and average strain rates was studied, and the service performance of the material under extreme conditions was determined. The absolute temperature rise was introduced to optimize the existing constitutive model. The results show that when the environment temperature is 298.15~473.15 K under high-speed impact, the internal thermal softening effect of the material is dominant in the competition with the work hardening, resulting in a decrease in the flow stress of the material. Through the analysis of the real stress-strain curve, it was found that the elastic modulus of the material was negatively correlated with the strain rate, negatively correlated with the temperature, and showed an obvious temperature-softening effect. Yield strength was negatively correlated with temperature and positively correlated with strain rate, which showed an obvious strain rate hardening effect. Based on SEM microscopic analysis, it was found that under given conditions, adiabatic shear bands appeared in some samples, and their internal structures demonstrated obvious change. It was judged that when high-speed impact occurs, cracks are induced at the shear bands, and the cracks will continue to develop along the adiabatic shear bands, resulting in many oblique cracks which will gradually become larger and eventually lead to material failure. Finally, based on the model, the strain rate and temperature softening terms were improved, and a rise in adiabatic temperature rise was introduced. The improved model can better describe the strain rate effect of the material and accurately describe its flow stress. It provides a theoretical basis for the engineering application of materials.

Dataset Information

Structural and compositional study of precipitates in under-aged Cu-added Al-Mg-Si alloy.

Publications

Structural and compositional study of precipitates in under-aged Cu-added Al-Mg-Si alloy.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets