Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Local data of heat flux, wall temperature and the void phase along the boiling curve during vertical subcooled flow boiling of refrigerant Novec 649 at a copper wall.

ABSTRACT: This data set contains local experimental data of heat flux, wall temperature and void data profiles for vertical subcooled flow boiling of refrigerant Novec 649 at a copper wall. This data article presents average boiling curves from single-phase convection to fully developed film boiling for six combinations of mass flux and subcooling. Void profiles are provided for void fraction, void detection frequency, void velocity and void ligament size for three characteristic states along each boiling curve. Thermocouples were used to measure heat flux and temperature. Optical single fiber and double fiber micro probes were used for obtaining void data profiles. A traversing mechanism was used to position the optical fiber micro probes relative to the heater surface.

SUBMITTER: Bruder M

PROVIDER: S-EPMC6234251 | biostudies-literature | 2018 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Local data of heat flux, wall temperature and the void phase along the boiling curve during vertical subcooled flow boiling of refrigerant Novec 649 at a copper wall.

Bruder Moritz M Sembach Ludwig L Krumova Veronika V Sattelmayer Thomas T

Data in brief 20181101

This data set contains local experimental data of heat flux, wall temperature and void data profiles for vertical subcooled flow boiling of refrigerant Novec 649 at a copper wall. This data article presents average boiling curves from single-phase convection to fully developed film boiling for six combinations of mass flux and subcooling. Void profiles are provided for void fraction, void detection frequency, void velocity and void ligament size for three characteristic states along each boiling ...[more]

PMID: 30456266

Similar Datasets

Hydrophilic and Hydrophobic Nanostructured Copper Surfaces for Efficient Pool Boiling Heat Transfer with Water, Water/Butanol Mixtures and Novec 649.

Project description:Increasing heat dissipation requirements of small and miniature devices demands advanced cooling methods, such as application of immersion cooling via boiling heat transfer. In this study, functionalized copper surfaces for enhanced heat transfer are developed and evaluated. Samples are functionalized using a chemical oxidation treatment with subsequent hydrophobization of selected surfaces with a fluorinated silane. Pool boiling tests with water, water/1-butanol mixture with self-rewetting properties and a novel dielectric fluid with low GWP (Novec™ 649) are conducted to evaluate the boiling performance of individual surfaces. The results show that hydrophobized functionalized surfaces covered by microcavities with diameters between 40 nm and 2 µm exhibit increased heat transfer coefficient (HTC; enhancements up to 120%) and critical heat flux (CHF; enhancements up to 64%) values in comparison with the untreated reference surface, complemented by favorable fabrication repeatability. Positive surface stability is observed in contact with water, while both the self-rewetting fluids and Novec™ 649 gradually degrade the boiling performance and in some cases also the surface itself. The use of water/1-butanol mixtures in particular results in surface chemistry and morphology changes, as observed using SEM imaging and Raman spectroscopy. This seems to be neglected in the available literature and should be focused on in further studies.

| S-EPMC8707367 | biostudies-literature

Critical heat flux maxima during boiling crisis on textured surfaces.

Project description:Enhancing the critical heat flux (CHF) of industrial boilers by surface texturing can lead to substantial energy savings and global reduction in greenhouse gas emissions, but fundamentally this phenomenon is not well understood. Prior studies on boiling crisis indicate that CHF monotonically increases with increasing texture density. Here we report on the existence of maxima in CHF enhancement at intermediate texture density using measurements on parametrically designed plain and nano-textured micropillar surfaces. Using high-speed optical and infrared imaging, we study the dynamics of dry spot heating and rewetting phenomena and reveal that the dry spot heating timescale is of the same order as that of the gravity and liquid imbibition-induced dry spot rewetting timescale. Based on these insights, we develop a coupled thermal-hydraulic model that relates CHF enhancement to rewetting of a hot dry spot on the boiling surface, thereby revealing the mechanism governing the hitherto unknown CHF enhancement maxima.

| S-EPMC4569857 | biostudies-literature

Mycoplasma Pneumoniae transcriptome along Growth Curve

Project description:To gain insight into ncRNAs functionality in bacteria, we studied the correlation of gene expression from Mycoplasma pneumoniae's ncRNAs with their overlapping ORFs over 10 different time points. This experiment contains RNAseq pair-end data from this 10 time points along Mycoplasma pneumoniae growth cycle.

2015-07-09 | E-MTAB-3076 | biostudies-arrayexpress

A numerical investigation of the effect of surface wettability on the boiling curve.

Project description:Surface wettability is recognized as playing an important role in pool boiling and the corresponding heat transfer curve. In this work, a systematic study of pool boiling heat transfer on smooth surfaces of varying wettability (contact angle range of 5° - 180°) has been conducted and reported. Based on numerical simulations, boiling curves are calculated and boiling dynamics in each regime are studied using a volume-of-fluid method with contact angle model. The calculated trends in critical heat flux and Leidenfrost point as functions of surface wettability are obtained and compared with prior experimental and theoretical predictions, giving good agreement. For the first time, the effect of contact angle on the complete boiling curve is shown. It is demonstrated that the simulation methodology can be used for studying pool boiling and related dynamics and providing more physical insights.

| S-EPMC5681255 | biostudies-literature

Mycoplasma Pneumoniae transcriptome along Growth Curve

Project description:Mycoplasma Pneumoniae transcriptome along Growth Curve

| PRJEB9843 | ENA

Critical heat flux enhancement in pool boiling through increased rewetting on nanopillar array surfaces.

Project description:Boiling is a key heat transfer process for a variety of power generation and thermal management technologies. We show that nanopillar arrays fabricated on a substrate enhance both the critical heat flux (CHF) and the critical temperature at CHF of the substrate and thus, effectively increase the limit of boiling before the boiling crisis is triggered. We reveal that the enhancement in both the CHF and the critical temperature results from an intensified rewetting process which increases with the height of nanopillars. We develop a predictive model based on experimental measurements of rewetting velocity to predict the enhancement in CHF and critical temperature of the nanopillar substrates. This model is critical for understanding how to control boiling enhancement and designing various nanostructured surfaces into specific applications.

| S-EPMC5859279 | biostudies-literature

Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces.

Project description:In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux of 91 W/cm2 at 40 °C of superheat and a maximum heat transfer coefficient of 23,000 W/m2 K. The processed samples were found to have a maximum critical heat flux of 142 W/cm2 at 29 °C and a maximum heat transfer coefficient of 67,400 W/m2 K. It was found that the enhancement of the critical heat flux was directly related to the wetting and wicking ability of the surface which acts to replenish the evaporating liquid and delay critical heat flux. The heat transfer coefficients were also found to increase when the surface area ratio was increased as well as the microstructure peak-to-valley height. Enhanced nucleate boiling is the main heat transfer mechanism, and is attributed to an increase in surface area and nucleation site density.

| S-EPMC6235449 | biostudies-other

Interactions between copper homeostasis and the fungal cell wall affect copper stress resistance.

Project description:Copper homeostasis mechanisms are essential for microbial adaption to changing copper levels within the host during infection. In the opportunistic fungal pathogen Cryptococcus neoformans (Cn), the Cn Cbi1/Bim1 protein is a newly identified copper binding and release protein that is highly induced during copper limitation. Recent studies demonstrated that Cbi1 functions in copper uptake through the Ctr1 copper transporter during copper limitation. However, the mechanism of Cbi1 action is unknown. The fungal cell wall is a dynamic structure primarily composed of carbohydrate polymers, such as chitin and chitosan, polymers known to strongly bind copper ions. We demonstrated that Cbi1 depletion affects cell wall integrity and architecture, connecting copper homeostasis with adaptive changes within the fungal cell wall. The cbi1Δ mutant strain possesses an aberrant cell wall gene transcriptional signature as well as defects in chitin / chitosan deposition and exposure. Furthermore, using Cn strains defective in chitosan biosynthesis, we demonstrated that cell wall chitosan modulates the ability of the fungal cell to withstand copper stress. Given the previously described role for Cbi1 in copper uptake, we propose that this copper-binding protein could be involved in shuttling copper from the cell wall to the copper transporter Ctr1 for regulated microbial copper uptake.

| S-EPMC9258870 | biostudies-literature

Vertical, capacitive microelectromechanical switches produced via direct writing of copper wires.

Project description:Three-dimensional (3D) direct writing based on the meniscus-confined electrodeposition of copper metal wires was used in this study to develop vertical capacitive microelectromechanical switches. Vertical microelectromechanical switches reduce the form factor and increase the area density of such devices in integrated circuits. We studied the electromechanical characteristics of such vertical switches by exploring the dependence of switching voltage on various device structures, particularly with regard to the length, wire diameter, and the distance between the two wires. A simple model was found to match the experimental measurements made in this study. We found that the electrodeposited copper microwires exhibit a good elastic modulus close to that of bulk copper. By optimizing the 3D structure of the electrodes, a volatile electromechanical switch with a sub-5?V switching voltage was demonstrated in a vertical microscale switch with a gap distance as small as 100?nm created with a pair of copper wires with diameters of ~1??m and heights of 25??m. This study establishes an innovative approach to construct microelectromechanical systems with arbitrary 3D microwire structures for various applications, including the demonstrated volatile and nonvolatile microswitches.

| S-EPMC6444713 | biostudies-literature

Mapping Refrigerant Gases in the New York City Skyline.

Project description:Cities are now home to more than 50% of the world's population and emit large quantities of pollutants from sources such as fossil fuel combustion and the leakage of refrigerants. We demonstrate the utility of persistent synoptic longwave hyperspectral imaging to study the ongoing leakage of refrigerant gases in New York City, compounds that either deplete the stratosphere ozone or have significant global warming potential. In contrast to current monitoring programs that are based on country-level reporting or aggregate measures of emissions, we present the identification of gaseous plumes with high spatial and temporal granularity in real-time over the skyline of Manhattan. The reported data highlights the emission of chemicals scheduled for phase-out. Our goal is to contribute to better understanding of the composition, sources, concentration, prevalence and patterns of emissions for the purposes of both research and policy.

| S-EPMC5453978 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data