Chemical use in the semiconductor manufacturing industry.
Ontology highlight
ABSTRACT: Background
The semiconductor industry is known to use a number of chemicals, but little is known about the exact chemicals used due to the ingredients being kept as a trade secret.Objectives
The objective of this study was to analyze chemical use using a safety data sheet (SDS) and chemical inventory provided by a major semiconductor company, which operated two factories (A and B).Methods
Descriptive statistics were obtained on the number of chemical products and ingredients, photoresists, and carcinogens, classified by the International Agency for Research on Cancer (IARC), as well as trade secret ingredients. The total chemical use per year was estimated from chemical inventories mass (kg).Results
A total of 428 and 432 chemical products were used in factories A and B, respectively. The number of pure chemical ingredients, after removing both trade secret ingredients and multiple counting, was 189 and 157 in factories A and B, respectively. The number of products containing carcinogens, such as sulfuric acid, catechol, and naphthalene was 47/428 (A) and 28/432 (B). Chemicals used in photolithography were 21% (A) and 26% (B) of all chemical products, and more than 97% among them were chemicals containing trade secret ingredients.Conclusions
Each year, 4.3 and 8.3 tons of chemicals were used per person in factories A and B, respectively. Because of the high level of commercial secrecy and the use of many unregulated chemicals, more sustainable policies and methods should be implemented to address health and safety issues in the semiconductor industry.
SUBMITTER: Kim S
PROVIDER: S-EPMC6237170 | biostudies-literature | 2018 Jul - Oct
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundResearch on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective.MethodsData on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined.ResultsOn average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16-56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials.ConclusionWe conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.
| S-EPMC7728705 | biostudies-literature
Project description:BackgroundTo solve current issues using big data, solve current issues related to the semiconductor and electronics industry, I tried to establish the data for each toxicity mechanism for adverse outcome pathway (AOP) for the exposure.ObjectiveI planned to increase the efficiency of human hazard assessment by searching, analyzing, and linking test data on the relationship between key events occurred at each level, which are the biological targets of chemicals in semiconductor manufacturing.ResultsIt was found that 48 kinds of chemicals had 11 AOPs, while 103 chemicals had multiple AOPs, and 26 had case evidence. As a result of AOP analysis, it was found that a total of 320 chemicals had 42 AOPs, and 190 major chemicals corresponded to 11 AOPs. It was found necessary to develop a complex AOP and secure an (inhalation or dermal) exposure scenario for combined exposure at work. As a comparative search (41 out of 190 chemicals) of biomarkers specific to occupational diseases, 12 biomarkers were found to be related to breast cancer. The AOPs for 50 specific chemicals were presented, together with occupational disease-specific AOPs and key events relationship from 50 chemicals, and taxonomic classification for each AOP analysis could be found. With a comparative search, 41 out of 190 chemicals were associated with specific biomarkers for occupational diseases, and 12 mRNA or protein biomarkers were found to be related to breast cancer by cross-validation with the attached Table 24 of the Enforcement Regulations of the OSHAct and the CTD.ConclusionThe mechanism of occupational diseases caused by chemicals was presented, together with pathological preventions. I believe that a strategy is needed to expand the target organization for each chemical by linking with activities, such as work environment measurement, and cooperating with screening items and methods suitable for toxic chemicals, like AOP tools.Supplementary informationThe online version contains supplementary material available at 10.1007/s13273-021-00139-4.
| S-EPMC8097676 | biostudies-literature
Project description:BackgroundThe photolithography process in the semiconductor industry uses various chemicals with little information on their constitution. This study aimed to identify the chemical constituents of photoresist (PR) products and their by-products and to compare these constituents with material safety data sheets (MSDSs) and analytical results.MethodsA total of 51 PRs with 48 MSDSs were collected. Analysis consisted of two parts: First, the constituents of the chemical products were identified and analyzed using MSDS data; second, for verification of the by-products of PR, volatile organic compounds were analyzed. The chemical constituents were categorized according to hazards.ResultsForty-five of 48 products contained trade secrets in amounts ranging from 1 to 65%. A total of 238 ingredients with multiple counting (35 ingredients without multiple counting) were identified in the MSDS data, and 48.7% of ingredients were labeled as trade secrets under the Korea Occupational Safety and Health Act. The concordance rate between the MSDS data and the analytical result was 41.7%. The by-product analysis identified 129 chemicals classified according to Chemical Abstracts Service No., with 17 chemicals that are carcinogenic, mutagenic, and reprotoxic substances. Formaldehyde was found to be released from 12 of 21 products that use novolak resin.ConclusionWe confirmed that several PRs contain carcinogens, and some were not specified in the toxicological information in the MSDS. Hazardous chemicals, including benzene and formaldehyde, are released from PRs products as by-products. Therefore, it is necessary to establish a systematic management system for chemical compounds and the working environment.
| S-EPMC6428989 | biostudies-literature
Project description:Assessment of risk in the field of nanotechnology requires an integrated multidisciplinary approach due to the complex and cross-disciplinary framework for materials and activities at the nanoscale. The present paper summarizes the workshop "Governance of emerging nano-risk in the semiconductor industry" held on April 26, 2018 in Brussels, Belgium. The event targeted representatives of stakeholder communities involved in the risk assessment and governance of the engineered nanomaterials. Nanoelectronics was selected as an impactful use case for risk assessment approaches and comparison to bottom-up nanofabrication. The workshop outlined key data gaps impeding successful assessment of risks associated with nanoparticle use in the industry, using the semiconductor industry as an example. The workshop outlined mitigation strategies informing future regulatory decisions and identified some directions for future efforts.
| S-EPMC7358517 | biostudies-literature
Project description:The 2D van der Waals crystals have shown great promise as potential future electronic materials due to their atomically thin and smooth nature, highly tailorable electronic structure, and mass production compatibility through chemical synthesis. Electronic devices, such as field effect transistors (FETs), from these materials require patterning and fabrication into desired structures. Specifically, the scale up and future development of "2D"-based electronics will inevitably require large numbers of fabrication steps in the patterning of 2D semiconductors, such as transition metal dichalcogenides (TMDs). This is currently carried out via multiple steps of lithography, etching, and transfer. As 2D devices become more complex (e.g., numerous 2D materials, more layers, specific shapes, etc.), the patterning steps can become economically costly and time consuming. Here, we developed a method to directly synthesize a 2D semiconductor, monolayer molybdenum disulfide (MoS2), in arbitrary patterns on insulating SiO2/Si via seed-promoted chemical vapor deposition (CVD) and substrate engineering. This method shows the potential of using the prepatterned substrates as a master template for the repeated growth of monolayer MoS2 patterns. Our technique currently produces arbitrary monolayer MoS2 patterns at a spatial resolution of 2 μm with excellent homogeneity and transistor performance (room temperature electron mobility of 30 cm2 V-1 s-1 and on-off current ratio of 107). Extending this patterning method to other 2D materials can provide a facile method for the repeatable direct synthesis of 2D materials for future electronics and optoelectronics.
| S-EPMC6397508 | biostudies-other
Project description:OBJECTIVE:There is a huge technology gap between regions in Chinese pharmaceutical manufacturing industry, which is the reality that must be faced. However, most of the available researches on innovation efficiency are based on the logic of a given technology level, ignoring the regional technological gap. This paper will stand from the perspective of technology gap and re-examine the innovation efficiency of pharmaceutical manufacturing industry in different regions of China and its impact on regional industrial competitiveness. METHODS:We use the DEA-BCC input-oriented model to measure innovation efficiency of 28 provinces from the data of China's pharmaceutical manufacturing industry. The threshold model is constructed, with technology level as the threshold variable, innovation efficiency as the main explanatory variable, and industrial competitiveness as the dependent variable. In the threshold model, 28 regions are divided into three technical groups, and further, the impact of innovation efficiency on industrial competitiveness in different groups is analyzed and compared. RESULTS:According to the empirical research results, an U-shaped efficiency trap has been found in Chinese pharmaceutical manufacturing industry, and the areas with medium technical level are at the bottom of the trap. The improvement of innovation efficiency does not necessarily promote the improvement of regional industrial competitiveness. Only in high-level and low-level technology groups, innovation efficiency has effectively promoted the improvement of industrial competitiveness. In addition, the intensity of R&D investment has a similar impact on industrial competitiveness. CONCLUSIONS:The findings suggest that, regions in the efficiency trap should strive to seek opportunities for industrial transformation and focus on the industrial transformation of new technology, new industry and new opportunities, instead of blindly pursuing R&D investment intensity and superstitious innovation efficiency. So as to free up innovation resources for high-quality technological innovation in other regions. In addition, the Chinese government should make use of its public hospital system to normalize and expand the centralized drug procurement and eliminate the low-quality innovation.
| S-EPMC7239465 | biostudies-literature
Project description:This study innovatively uses local government regulations related to manufacturing to quantitatively identify industrial policies. The degree of influence and functional mechanism of China's industrial policies on the green competitiveness of the manufacturing industry are empirically examined using the provincial and regional panel data. Additionally, the synergistic complementary effect between industrial policy power and market forces and the fiscal decentralization's role in influencing industrial policies are investigated. The results reveal that the promulgation and implementation of industrial policies have significantly promoted the green competitiveness of the manufacturing industry. Regarding functional mechanisms, environmental governance has played a positive role in promoting the green competitiveness of the manufacturing industry supported by industrial policies, resource allocation, and innovation incentives. Meanwhile, industrial policies on green competitiveness in manufacturing depend on marketization and fiscal decentralization in local governments. The above findings demonstrate that the local governments in China, a developing economy, can play the role of development-oriented governments. Based on conforming to market deepening and system optimization, they can formulate and implement industrial policies in a rational manner and achieve green development and upgrade the manufacturing industry.
| S-EPMC8244902 | biostudies-literature
Project description:The conventional manufacturing methods for fabricating orthotic and prosthetic (O&P) devices have been in practice for a very long time. Recently, O&P service providers have started exploring different advanced manufacturing techniques. The objective of this paper is to perform a mini review on recent progress in the use of polymer-based additive manufacturing (AM) for O&P devices and to gather insights from the O&P professionals on the current practices and technologies and on the prospect of using AM techniques in this field. In our study, first, scientific articles on AM for O&P devices were studied. Then, twenty-two (22) interviews were conducted with O&P professionals from Canada. The primary focus was on five key areas: cost, material, design and fabrication efficiency, structural strength, functionality, and patient satisfaction. The cost of manufacturing the O&P devices using AM techniques is lower as compared to the conventional methods. O&P professionals expressed their concern over the materials and structural strength of the 3D-printed prosthetic devices. Published articles report comparable functionality and patient satisfaction for both O&P devices. AM also greatly improves design and fabrication efficiency. However, due to a lack of qualification standards for 3D printed O&P devices, 3D printing is being embraced more slowly in the O&P business than in other industries.
| S-EPMC10057521 | biostudies-literature
Project description:Chemical lift-off lithography (CLL) is a subtractive soft-lithographic technique that uses polydimethylsiloxane (PDMS) stamps to pattern self-assembled monolayers of functional molecules for applications ranging from biomolecule patterning to transistor fabrication. A hallmark of CLL is preferential cleavage of Au-Au bonds, as opposed to bonds connecting the molecular layer to the substrate, i.e., Au-S bonds. Herein, we show that CLL can be used more broadly as a technique to pattern a variety of substrates composed of coinage metals (Pt, Pd, Ag, Cu), transition and reactive metals (Ni, Ti, Al), and a semiconductor (Ge) using straightforward alkanethiolate self-assembly chemistry. We demonstrate high-fidelity patterning in terms of precise features over large areas on all surfaces investigated. We use patterned monolayers as chemical resists for wet etching to generate metal microstructures. Substrate atoms, along with alkanethiolates, were removed as a result of lift-off, as previously observed for Au. We demonstrate the formation of PDMS-stamp-supported bimetallic monolayers by performing CLL on two different metal surfaces using the same PDMS stamp. By expanding the scope of the surfaces compatible with CLL, we advance and generalize CLL as a method to pattern a wide range of substrates, as well as to produce supported metal monolayers, both with broad applications in surface and materials science.
| S-EPMC7220117 | biostudies-literature
Project description:A current and universal challenge, particularly in developing nations, is the establishment of effective environmental regulation policies that protect the ecological environment without adversely affecting the international competitiveness of the domestic manufacturing industry. To deal with this dilemma, this study investigates the export competitiveness of China's manufacturing industry from the viewpoint of export value added. The Porter hypothesis is applied for an empirical investigation of the effect of environmental regulation on export competitiveness and to determine the presence of intra-industry heterogeneity. Furthermore, this study seeks to understand the mechanisms through which environmental regulation affects export competitiveness by exploring the two main approaches to technological innovation. The findings reveal that environmental regulation has a promotion effect of approximately 2% on the export competitiveness of China's manufacturing industry; however, this effect is non-linear and displays a "U-shaped" tendency, indicating that certain prerequisites must be fulfilled to validate the Porter hypothesis. In addition, the effect of environmental regulation displays significant intra-industry heterogeneity, which is evident primarily in heavily polluting sub-industries and to a lesser extent in moderately polluting sub-industries but insignificant in lightly polluting sub-industries. Environmental regulation also differs significantly in the mechanisms through which it affects different approaches to technological innovation. Independent research and development is affected by environmental regulation through the compliance cost effect, which limits export competitiveness, while technology introduction is affected by the innovation offset effect, which favors export competitiveness. These findings offer political implications for the sustainable development of the ecological environment and foreign trade.
| S-EPMC7068581 | biostudies-literature