Simulating the interaction between a descending super-quadric solid object and a soap film
Ontology highlight
ABSTRACT:
SUBMITTER: Davies I
PROVIDER: S-EPMC6237502 | biostudies-literature | 2018 Oct
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The coating of thin films is applied in numerous fields and many methods are employed for the deposition of these films. Some coating techniques may deposit films at high speed; for example, ordinary printing paper is coated with micrometre-thick layers of clay at a speed of tens of meters per second. However, to coat nanometre thin films at high speed, vacuum techniques are typically required, which increases the complexity of the process. Here, we report a simple wet chemical method for the high-speed coating of films with thicknesses at the nanometre level. This soap-film coating technique is based on forcing a substrate through a soap film that contains nanomaterials. Molecules and nanomaterials can be deposited at a thickness ranging from less than a monolayer to several layers at speeds up to meters per second. We believe that the soap-film coating method is potentially important for industrial-scale nanotechnology.
| S-EPMC3600599 | biostudies-literature
Project description:We study the spreading of a droplet of surfactant solution on a thin suspended soap film as a function of dynamic surface tension and volume of the droplet. Radial growth of the leading edge (R) shows power-law dependence on time with exponents ranging roughly from 0.1 to 1 for different surface tension differences (Δσ) between the film and the droplet. When the surface tension of the droplet is lower than the surface tension of the film (Δσ > 0), we observe rapid spreading of the droplet with R ≈ tα, where α (0.4 < α < 1) is highly dependent on Δσ. Balance arguments assuming the spreading process is driven by Marangoni stresses versus inertial stresses yield α = 2/3. When the surface tension difference does not favor spreading (Δσ < 0), spreading still occurs but is slow with 0.1 < α < 0.2. This phenomenon could be used for stretching droplets in 2D and modifying thin suspended films.
| S-EPMC6868707 | biostudies-literature
Project description:It is well-known that a soap film spanning a looped wire can have the topology of a Möbius strip and that deformations of the wire can induce a transformation to a two-sided film, but the process by which this transformation is achieved has remained unknown. Experimental studies presented here show that this process consists of a collapse of the film toward the boundary that produces a previously unrecognized finite-time twist singularity that changes the linking number of the film’s Plateau border and the centerline of the wire. We conjecture that it is a general feature of this type of transition that the singularity always occurs at the surface boundary. The change in linking number is shown to be a consequence of a viscous reconnection of the Plateau border at the moment of the singularity. High-speed imaging of the collapse dynamics of the film’s throat, similar to that of the central opening of a catenoid, reveals a crossover between two power laws. Far from the singularity, it is suggested that the collapse is controlled by dissipation within the fluid film surrounding the wire, whereas closer to the transition the power law has the classical form arising from a balance between air inertia and surface tension. Analytical and numerical studies of minimal surfaces and ruled surfaces are used to gain insight into the energetics underlying the transition and the twisted geometry in the neighborhood of the singularity. A number of challenging mathematical questions arising from these observations are posed.
| S-EPMC3009808 | biostudies-other
Project description:We observe tracer particles diffusing in soap films to measure the two-dimensional (2D) viscous properties of the films. Saffman-Delbrück type models relate the single-particle diffusivity to parameters of the film (such as thickness h) for thin films, but the relation breaks down for thicker films. Notably, the diffusivity is faster than expected for thicker films, with the crossover at h/d = 5.2 ± 0.9 using the tracer particle diameter d. This indicates a crossover from purely 2D diffusion to diffusion that is more three-dimensional. We demonstrate that measuring the correlations of particle pairs as a function of their separation overcomes the limitations of the Saffman-Delbrück model and allows one to measure the viscosity of a soap film for any thickness.
| S-EPMC4379181 | biostudies-literature
Project description:Stimulus selection is a critical part of experimental designs in the cognitive sciences. Quantifying and controlling item similarity using a unified scale provides researchers with the tools to eliminate item-dependent effects and improve reproducibility. Here we present a novel Similar Object and Lure Image Database (SOLID) that includes 201 categories of grayscale objects, with approximately 17 exemplars per set. Unlike existing databases, SOLID offers both a large number of stimuli and a considerable range of similarity levels. A common scale of dissimilarity was obtained by using the spatial-arrangement method (Exps. 1a and 1b) as well as a pairwise rating procedure to standardize the distances (Exp. 2). These dissimilarity distances were then validated in a recognition memory task, showing better performance and decreased response times as dissimilarity increased. These methods were used to produce a large stimulus database (3,498 images) with a wide range of comparable similarities, which will be useful for improving experimental control in fields such as memory, perception, and attention. Enabling this degree of control over similarity is critical for high-level studies of memory and cognition, and combining this strength with the option to use it across many trials will allow research questions to be addressed using neuroimaging techniques.
| S-EPMC7005083 | biostudies-literature
Project description:This article contains flow visualization data from experiments conducted in an inclined gravity-driven soap film intersected by a circular cylinder undergoing controlled transverse oscillations at a Reynolds number of Re≈235 . The dimensionless frequency and amplitude of cylinder oscillation were varied systematically over the ranges 0.2<f*<1.8 and 0.1<A*<1.3 . A high-speed camera was used to capture the interference fringe patterns reflected from the soap film. These videos show the structure of the wake behind the cylinder, including the initial formation of vortices and the extended 'vortex street'. Several wake patterns were identified, including the classic 2S, P+S, 2P, and 2T patterns, which are discussed in detail in the accompanying research article titled "The wake of a transversely oscillating circular cylinder in a flowing soap film at low Reynolds number" [1]. The videos presented in this article can be accessed through the Virginia Tech University Libraries' Repository at https://doi.org/10.7294/14448027.v5[2].
| S-EPMC8814753 | biostudies-literature
Project description:Scenes strongly facilitate object recognition, such as when we make out the shape of a distant boat on the water. Yet, although known to interact in perception, neuroimaging research has primarily provided evidence for separate scene- and object-selective cortical pathways. This raises the question of how these pathways interact to support context-based perception. Here we used a novel approach in human fMRI and MEG studies to reveal supra-additive scene-object interactions. Participants (men and women) viewed degraded objects that were hard to recognize when presented in isolation but easy to recognize within their original scene context, in which no other associated objects were present. fMRI decoding showed that the multivariate representation of the objects' category (animate/inanimate) in object-selective cortex was strongly enhanced by the presence of scene context, even though the scenes alone did not evoke category-selective response patterns. This effect in object-selective cortex was correlated with concurrent activity in scene-selective regions. MEG decoding results revealed that scene-based facilitation of object processing peaked at 320 ms after stimulus onset, 100 ms later than peak decoding of intact objects. Together, results suggest that expectations derived from scene information, processed in scene-selective cortex, feed back to shape object representations in visual cortex. These findings characterize, in space and time, functional interactions between scene- and object-processing pathways.SIGNIFICANCE STATEMENT Although scenes and objects are known to contextually interact in visual perception, the study of high-level vision has mostly focused on the dissociation between their selective neural pathways. The current findings are the first to reveal direct facilitation of object recognition and neural representation by scene background, even in the absence of contextually associated objects. Using a multivariate approach to both fMRI and MEG, we characterize the functional neuroanatomy and neural dynamics of such scene-based object facilitation. Finally, the correlation of this effect with scene-selective activity suggests that, although functionally distinct, scene and object processing pathways do interact at a perceptual level to fill in for insufficient visual detail.
| S-EPMC6596648 | biostudies-literature
Project description:Conventional far-field microscopy cannot directly resolve the sub-diffraction spatial distribution of localized surface plasmons in metal nanostructures. Using BaTiO3 microspheres as far-field superlenses by collecting the near-field signal, we can map the origin of enhanced two-photon photoluminescence signal from the gap region of gold nanosphere dimers and gold nanorod dimers beyond the diffraction limit, on a conventional far-field microscope. As the angle θ between dimer's structural axis and laser polarisation changes, photoluminescence intensity varies with a cos4θ function, which agrees quantitatively with numerical simulations. An optical resolution of about λ/7 (λ: two-photon luminescence central wavelength) is demonstrated at dimer's gap region.
| S-EPMC5653755 | biostudies-literature
Project description:Laser ablation is often simulated by the two-temperature model in which electrons are assumed to be thermalized by laser irradiation, while an explicit representation of interaction between laser-field and electrons is challenging but beneficial as being free from any adjustable parameters. Here, an ab initio method based on the time-dependent density functional theory (TDDFT) in which electron-ion dynamics under a laser field are numerically simulated is examined as a tool for simulating femtosecond laser processing of metals. Laser-induced volume expansion in surface normal directions of Cu(111) and Ni(111) surfaces are simulated by using repeating slab models. The amount of simulated volume expansion is compared between Cu(111) and Ni(111) slabs for the same laser pulse conditions, and the Ni slab is found to expand more than the Cu slab despite the smaller thermal expansion coefficient of Ni compared with Cu. The analyzed electronic excitation and lattice motion were compared to those in the two-temperature model. The threshold fluence to release surface Cu atom deduced from current TDDFT approach is found to be comparable to those of Cu ablation reported experimentally.
| S-EPMC8285478 | biostudies-literature
Project description:Evidence suggests that both the interaction of so-called Merkel cells and the epidermal stress distribution play an important role in the formation of fingerprint patterns during pregnancy. To model the formation of fingerprint patterns in a biologically meaningful way these patterns have to become stationary. For the creation of synthetic fingerprints it is also very desirable that rescaling the model parameters leads to rescaled distances between the stationary fingerprint ridges. Based on these observations, as well as the model introduced by Kücken and Champod we propose a new model for the formation of fingerprint patterns during pregnancy. In this anisotropic interaction model the interaction forces not only depend on the distance vector between the cells and the model parameters, but additionally on an underlying tensor field, representing a stress field. This dependence on the tensor field leads to complex, anisotropic patterns. We study the resulting stationary patterns both analytically and numerically. In particular, we show that fingerprint patterns can be modeled as stationary solutions by choosing the underlying tensor field appropriately.
| S-EPMC6534530 | biostudies-literature