Dataset Information

From chip-in-a-lab to lab-on-a-chip: a portable Coulter counter using a modular platform.

ABSTRACT: The field of microfluidics has been struggling to obtain widespread market penetration. In order to overcome this struggle, a standardized and modular platform is introduced and applied. By providing easy-to-fabricate modular building blocks which are compatible with mass manufacturing, we decrease the gap from lab-to-fab. These standardized blocks are used in combination with an application-specific fluidic circuit board. On this board, electrical and fluidic connections are demonstrated by implementing an alternating current Coulter counter. This multipurpose building block is reusable in many applications. In this study, it identifies and counts 6 and 11??m beads. The system is kept in a credit card-sized footprint, as a result of in-house-developed electronics and standardized building blocks. We believe that this easy-to-fabricate, credit card-sized, modular, and standardized prototype brings us closer to clinical and veterinary applications, because it provides an essential stepping stone to fully integrated point -of -care devices.

SUBMITTER: Dekker S

PROVIDER: S-EPMC6240576 | biostudies-literature | 2018

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

From chip-in-a-lab to lab-on-a-chip: a portable Coulter counter using a modular platform.

Dekker Stefan S Isgor Pelin Kubra PK Feijten Tobias T Segerink Loes I LI Odijk Mathieu M

Microsystems & nanoengineering 20181119

The field of microfluidics has been struggling to obtain widespread market penetration. In order to overcome this struggle, a standardized and modular platform is introduced and applied. By providing easy-to-fabricate modular building blocks which are compatible with mass manufacturing, we decrease the gap from lab-to-fab. These standardized blocks are used in combination with an application-specific fluidic circuit board. On this board, electrical and fluidic connections are demonstrated by imp ...[more]

PMID: 31057922

Similar Datasets

Project description:Chip-to-chip and world-to-chip fluidic interconnections are paramount to enable the passage of liquids between component chips and to/from microfluidic systems. Unfortunately, most interconnect designs add additional physical constraints to chips with each additional interconnect leading to over-constrained microfluidic systems. The competing constraints provided by multiple interconnects induce strain in the chips, creating indeterminate dead volumes and misalignment between chips that comprise the microfluidic system. A novel, gasketless superhydrophobic fluidic interconnect (GSFI) that uses capillary forces to form a liquid bridge suspended between concentric through-holes and acting as a fluid passage was investigated. The GSFI decouples the alignment between component chips from the interconnect function and the attachment of the meniscus of the liquid bridge to the edges of the holes produces negligible dead volume. This passive seal was created by patterning parallel superhydrophobic surfaces (water contact angle ≥ 150°) around concentric microfluidic ports separated by a gap. The relative position of the two polymer chips was determined by passive kinematic constraints, three spherical ball bearings seated in v-grooves. A leakage pressure model derived from the Young-Laplace equation was used to estimate the leakage pressure at failure for the liquid bridge. Injection-molded, Cyclic Olefin Copolymer (COC) chip assemblies with assembly gaps from 3 to 240 µm were used to experimentally validate the model. The maximum leakage pressure measured for the GSFI was 21.4 kPa (3.1 psig), which corresponded to a measured mean assembly gap of 3 µm, and decreased to 0.5 kPa (0.073 psig) at a mean assembly gap of 240 µm. The effect of radial misalignment on the efficacy of the gasketless seals was tested and no significant effect was observed. This may be a function of how the liquid bridges are formed during the priming of the chip, but additional research is required to test that hypothesis.

Dataset Information

From chip-in-a-lab to lab-on-a-chip: a portable Coulter counter using a modular platform.

Publications

From chip-in-a-lab to lab-on-a-chip: a portable Coulter counter using a modular platform.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets