Dataset Information

Antifouling Super Water Absorbent Supramolecular Polymer Hydrogel as an Artificial Vitreous Body.

ABSTRACT: Recently, there has been a high expectation that high water absorbent hydrogels can be developed as an artificial vitreous body. However, the drawbacks associated with in vivo instability, biofouling, uncontrollable in situ reaction time, and injection-induced precrosslinked fragmentation preclude their genuine use as vitreous substitutes. Here, a supramolecular binary copolymer hydrogel termed as PNAGA-PCBAA by copolymerization of N-acryloyl glycinamide (NAGA) and carboxybetaine acrylamide (CBAA) is prepared. This PNAGA-PCBAA hydrogel physically crosslinked by dual amide hydrogen bonds of NAGA exhibits an ultralow solid content (1.6, 98.4 wt% water content), and shear-thinning behavior, body temperature extrudability/self-healability, rapid network recoverability, and very close key parameters (modulus, antifouling/antifibrosis, light transmittance, refractive index, ultrastability) to human vitreous body. It is demonstrated that the hydrogel can be readily injected by a 22G needle into the rabbits' eyes where the gelling network is rapidly recovered. After 16 weeks postoperation, the hydrogel acts as a very stable vitreous substitute without affecting the structure of soft tissues in eye, or eliciting adverse effects. This supramolecular binary copolymer hydrogel finds a broad application in ophthalmic fields as not only a self-recoverable permanent vitreous substitute, but also transient intraocular filling for prevention of inner tissues in postsurgical eyes.

SUBMITTER: Wang H

PROVIDER: S-EPMC6247043 | biostudies-literature | 2018 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Antifouling Super Water Absorbent Supramolecular Polymer Hydrogel as an Artificial Vitreous Body.

Wang Hongbo H Wu Yuanhao Y Cui Chunyan C Yang Jianhai J Liu Wenguang W Liu Wenguang W

Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20180925 11

Recently, there has been a high expectation that high water absorbent hydrogels can be developed as an artificial vitreous body. However, the drawbacks associated with in vivo instability, biofouling, uncontrollable in situ reaction time, and injection-induced precrosslinked fragmentation preclude their genuine use as vitreous substitutes. Here, a supramolecular binary copolymer hydrogel termed as PNAGA-PCBAA by copolymerization of <i>N</i>-acryloyl glycinamide (NAGA) and carboxybetaine acrylami ...[more]

PMID: 30479921

Similar Datasets

Project description:Fibrosis of implants remains a significant challenge in the use of biomedical devices and tissue engineering materials. Antifouling coatings, including synthetic zwitterionic coatings, have been developed to prevent fouling and cell adhesion to several implantable biomaterials. While many of these coatings need covalent attachment, a conceptually simpler approach is to use a spontaneous self-assembly event to anchor the coating to a surface. This could simplify material processing through highly specific molecular recognition. Herein, we investigate the ability to utilize directional supramolecular interactions to anchor an antifouling coating to a polymer surface containing a complementary supramolecular unit. A library of controlled copolymerization of ureidopyrimidinone methacrylate (UPyMA) and 2-methacryloyloxyethyl phosphorylcholine (MPC) was prepared and their UPy composition was assessed. The MPC-UPy copolymers were characterized by 1H NMR, Fourier transform infrared (FTIR), and gel permeation chromatography (GPC) and found to exhibit similar mol % of UPy as compared to feed ratios and low dispersities. The copolymers were then coated on an UPy elastomer and the surfaces were assessed for hydrophilicity, protein absorption, and cell adhesion. By challenging the coatings, we found that the antifouling properties of the MPC-UPy copolymers with more UPy mol % lasted longer than the MPC homopolymer or low UPy mol % copolymers. As a result, the bioantifouling nature could be tuned to exhibit spatio-temporal control, namely, the longevity of a coating increased with UPy composition. In addition, these coatings showed nontoxicity and biocompatibility, indicating their potential use in biomaterials as antifouling coatings. Surface modification employing supramolecular interactions provided an approach that merges the simplicity and scalability of nonspecific coating methodology with the specific anchoring capacity found when using conventional covalent grafting with longevity that could be engineered by the supramolecular composition itself.

Project description:Biofertilizer is a good substitute for chemical fertilizer in sustainable agriculture, but its effects are often hindered by drought stress. Super absorbent polymer (SAP), showing good capacity of water absorption and retention, can increase soil moisture. However, limited information is available about the efficiency of biofertilizer amended with SAP. This study was conducted to investigate the effects of synergistic application of SAP and biofertilizers (Paenibacillus beijingensis BJ-18 and Bacillus sp. L-56) on plant growth, including wheat and cucumber. Potted soil was treated with different fertilizer combinations (SAP, BJ-18 biofertilizer, L-56 biofertilizer, BJ-18 + SAP, L-56 + SAP), and pot experiment was carried out to explore its effects on viability of inoculants, seed germination rate, plant physiological and biochemical parameters, and expression pattern of stress-related genes under drought condition. At day 29 after sowing, the highest viability of strain P. beijingensis BJ-18 (264 copies ng-1 gDNA) was observed in BJ-18 + SAP treatment group of wheat rhizosphere soil, while that of strain Bacillus sp. L-56 (331 copies ng-1 gDNA) was observed in the L-56 + SAP treatment group of cucumber rhizosphere soil. In addition, both biofertilizers amended with SAP could promote germination rate of seeds (wheat and cucumber), plant growth, soil fertility (urease, sucrose, and dehydrogenase activities). Quantitative real-time PCR analysis showed that biofertilizer + SAP significantly down-regulated the expression levels of genes involved in ROS scavenging (TaCAT, CsCAT, TaAPX, and CsAPX2), ethylene biosynthesis (TaACO2, CsACO1, and CsACS1), stress response (TaDHN3, TaLEA, and CsLEA11), salicylic acid (TaPR1-1a and CsPR1-1a), and transcription activation (TaNAC2D and CsNAC35) in plants under drought stress. These results suggest that SAP addition in biofertilizer is a good tactic for enhancing the efficiency of biofertilizer, which is beneficial for plants in response to drought stress. To the best of our knowledge, this is the first report about the effect of synergistic use of biofertilizer and SAP on plant growth under drought stress.

Project description:One of the major factors limiting the production of medicinal plants in arid and semi-arid areas is water deficit or drought stress. One-third of the land in the world is arid and semi-arid and is inhabited by nearly 4 × 108 people. Ocimum basilicum (sweet basil) is a valuable medicinal plant that is sensitive to water deficit, and water shortage negatively affects sweet basil yield and quality. Water availability in the root zone of basil could ameliorate the negative effects of water shortage. To the best of our knowledge, although the effects of hydrophilic polymers (HPs) have been studied in different agricultural crops, the effects of HP application in medicinal plants have not been previously investigated. This investigation was conducted to explore the effects on water use efficiency when using Stockosorb® (STS) and psyllium seed mucilage (PSM) as hydrophilic polymers (HPs) and the effects of these HPs on essential oil quality, quantity, and yield. The research was set up in a factorial experiment on the basis of completely randomized block design with three replications. We used two HPs, STS (industrial) and PSM (herbal), with two methods of application (mixed with soil, mixed with soil + root) at four concentrations (0%, 0.1%, 0.2%, and 0.3% (w/w)). Results showed that the STS and PSM significantly increased the dry herb yield (both shoot and root) in comparison to the control, and the improving effect was higher when these HPs were mixed with soil + root. The highest dry herb yield (6.74 and 3.68 g/plant for shoot and root, respectively) was detected in the PSM at 0.1% mixed with soil + root. There was not any significant difference in dry herb yield among PSM (0.1%), PSM (0.2%), and STS (0.2%) when mixed with soil + root. Soil application of PSM and soil + root application of STS at a concentration of 0.3% increased the Essential Oil (EO) content almost three-fold in comparison to the control (0.5% and 0.52% to 0.18% v/w, respectively). The maximum essential oil yield was recorded in plants treated with STS (0.2% in) or PSM (0.1%) by soil + root application (0.21 and 0.19 mL/plant, respectively). PSM at concentrations of 0.1% and 0.2% (mixed with soil + root) showed the highest water use efficiency (1.91 and 1.82 g dry weight (DW)/L H2O, respectively). STS mixed with soil also significantly improved water use efficiency (WUE) in comparison to the control. The application of these HPs improved the quality of sweet basil essential oil by increasing the linalool and decreasing the eugenol, epi-?-cadinol, and trans-?-bergamotene content.

Project description:With the serious shortage of water resources and the development of water-saving agriculture, the application of drip irrigation has been paid more and more attention. But there was lack of oat planting methods suitable for drip irrigation, currently. In order to establish an efficient oat planting method for drip irrigation, a study was conducted at Agriculture and Forestry Sciences of Ulanqab, Inner Mongolia during the season (2019-2020) to evaluate the effect of strip cropping with reducing row spacing and super absorbent polymer on the yield and water use efficiency of oat. To conduct the field trials, a split plot system in three replications was established. Three planting patterns were in the main plots, including conventional cropping with 20 cm equal row spacing (PA), strip cropping with the 15 cm row spacing (PB) and strip cropping with the 10 cm row spacing (PC), and two super absorbent polymer levels were in the subplots, including 22.5 kg ha-2 (Y) and 0 (N). The results showed that, compared with PA, PB and PC both decreased the irrigation volumes by 4.5-18.4 mm, and the irrigation volumes of PB was lower than that of PC. When super absorbent polymers were applied, compared with PA, PB significantly increased grain yield and above-ground biomass, but PC had the opposite effects. The grain yield and above-ground biomass of PB significantly increased by 16.65% and 7.31% on average in two years, respectively. And the increasing of grain yield was attributed by the significant increasing of pike number and kernel number per spike. But when super absorbent polymers were not applied, PB had no significant effects on grain yield and above-ground biomass. PB also had the significant effects on regulating water use of oats weather or not super absorbent polymers were applied, it significantly increased the precipitation ratio by 2.64% (PBY) and 2.13% (PBN) and decreased irrigation ration by 3.32% (PBY) and 5.28% (PBN) on average in two years. Although PB and PC both decreased the total evapotranspiration, but PB increased WUE and PC deceased WUE. The WUE of PB increased by 19.70% (PBY) and 9.87% (PBN) on average in two years. Also PB had the highest economic benefits in all treatments. In conclusion, a drip irrigation oat planting pattern was proposed, which the row spacing is 15 cm, adjusted the equal row spacing planting to 8-row strip planting, with a belt spacing of 30 cm, combined with the application of 22.5 kg ha-2 applying super absorbent polymers. And this oat planting pattern is a viable strategy to improve oat productivity.

Dataset Information

Antifouling Super Water Absorbent Supramolecular Polymer Hydrogel as an Artificial Vitreous Body.

Publications

Antifouling Super Water Absorbent Supramolecular Polymer Hydrogel as an Artificial Vitreous Body.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets