Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A blister-like soft nano-textured thermo-pneumatic actuator as an artificial muscle.

ABSTRACT: Here, model blister-like soft thermo-pneumatic artificial muscles with the embedded nanofibers impregnated with ethanol are developed. The muscles are essentially blister-like thermo-pneumatic soft actuators (BTSAs), which deflect in response to heat supplied to their bottom. The resulting deflections are on the scale of 1 cm, and the BTSAs are operational for several cycles. They are able to raise the artificial rigid scales, spines or fur/thin fibers attached to them emulating animals such as pangolin, hedgehog and porcupine. They are also capable of removing the stickiest adhesive tapes attached to them, and thus hold great promise for biomedical applications where artificially grown skin patches should be removed from an underlying substrate without being damaged. The theory of the BTSA proposed in this work is in reasonable agreement with the acquired experimental data.

SUBMITTER: An S

PROVIDER: S-EPMC6250565 | biostudies-literature | 2018 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A blister-like soft nano-textured thermo-pneumatic actuator as an artificial muscle.

An Seongpil S Kang Dong Jin DJ Yarin Alexander L AL

Nanoscale 20180901 35

Here, model blister-like soft thermo-pneumatic artificial muscles with the embedded nanofibers impregnated with ethanol are developed. The muscles are essentially blister-like thermo-pneumatic soft actuators (BTSAs), which deflect in response to heat supplied to their bottom. The resulting deflections are on the scale of 1 cm, and the BTSAs are operational for several cycles. They are able to raise the artificial rigid scales, spines or fur/thin fibers attached to them emulating animals such as ...[more]

PMID: 30152831

Similar Datasets

Programmable soft robotics based on nano-textured thermo-responsive actuators.

Project description:Soft robotic systems are increasingly emerging as robust alternatives to conventional robotics. Here, we demonstrate the development of programmable soft actuators based on volume expansion/retraction accompanying liquid-vapor phase transition of a phase-change material confined within an elastomer matrix. The combination of a soft matrix (a silicone-based elastomer) and an embedded ethanol-impregnated polyacrylonitrile nanofiber (PAN NF) mat makes it possible to form a sealed compound device that can be operated by changing the actuator temperature above/below the boiling point of ethanol. The thermo-responsive actuators based on this principle demonstrate excellent bending ability at a sufficiently high temperature (>90 °C) - comparable with compressed air-based soft actuators. The actuator using the mechanism presented here is easy to manufacture and automate and is recyclable. Finally, the actuation mechanism can be incorporated into a wide variety of shapes and configurations, making it possible to obtain tunable and programmable soft robots that could have a wide variety of industrial applications.

| S-EPMC6440209 | biostudies-literature

Polypyrrole nanoparticles-based soft actuator for artificial muscle applications.

Project description:Currently, a straightforward fabrication technique for the development of soft actuators to explore their potential in robotic applications using environmentally compatible raw materials represents an important challenge. A conventional conducting polymer, such as polypyrrole (PPy), shows promising conductivity for such applications. This study presents the synthesis of PPy/polyvinyl alcohol (PPy/PVA)-based ion exchange polymer films containing PEDOT:PSS/SWNT/IL electrodes that undergo conformational changes in response to the applied voltage. Four types of ionic polymer actuator films with different sizes of PPy nanoparticles were fabricated to investigate the size-dependent electromechanical actuation performance. The aim of this study is to design and develop a stable, flexible, and reliable film actuator for robotic applications. Scanning electron microscopy and transmittance electron microscopy were performed to observe the surface morphology and detailed structure of the fabricated actuator films. The current density and ionic conductivity are demonstrated by the cyclic voltammogram and linear sweep voltammogram, respectively. The enhanced values of the water uptake, ion exchange capacity and ionic conductivity of the PPy/PVA polymer composite films enhanced the electrical properties and the tip deflection performance as compared to those of the other reported expensive perfluorinated polymer-based membrane actuators. A two finger-based micro gripping device was also developed, in which both the fingers were made up of the O-PPy/PVA/EL-based ion exchange polymer films. This mechanically stable and flexible film actuator fabricated via a synergistic combination of PPy/PVA composition containing PEDOT:PSS/SWNT/IL electrode surfaces possesses a substantial potential as an actuator material for micro robotic applications.

| S-EPMC9076173 | biostudies-literature

A Soft Pneumatic Two-Degree-of-Freedom Actuator for Endoscopy.

Project description:The rise of soft robotics opens new opportunities in endoscopy and minimally invasive surgery. Pneumatic catheters offer a promising alternative to conventional steerable catheters for safe navigation through the natural pathways without tissue injury. In this work, we present an optimized 6 mm diameter two-degree-of-freedom pneumatic actuator, able to bend in every direction and incorporating a 1 mm working channel. A versatile vacuum centrifugal overmolding method capable of producing small geometries with a variety of silicones is described, and meter-long actuators are extruded industrially. An improved method for fiber reinforcement is also presented. The actuator achieves bending more than 180° and curvatures of up to 0.1 mm-1. The exerted force remains below 100 mN, and with no rigid parts in the design, it limits the risks of damage on surrounding tissues. The response time of the actuator is below 300 ms and therefore not limited for medical applications. The working space and multi-channel actuation are also experimentally characterized. The focus is on the study of the influence of material stiffness on mechanical performances. As a rule, the softer the material, the better the energy conversion, and the stiffer the material, the larger the force developed at a given curvature. Based on the actuator, a 90 cm long steerable catheter demonstrator carrying an optical fiber is developed, and its potential for endoscopy is demonstrated in a bronchial tree phantom. In conclusion, this work contributes to the development of a toolbox of soft robotic solutions for MIS and endoscopic applications, by validating and characterizing a promising design, describing versatile and scalable fabrication methods, allowing for a better understanding of the influence of material stiffness on the actuator capabilities, and demonstrating the usability of the solution in a potential use-case.

| S-EPMC8636041 | biostudies-literature

Modeling of a Soft-Rigid Gripper Actuated by a Linear-Extension Soft Pneumatic Actuator.

Project description:Soft robot has been one significant study in recent decades and soft gripper is one of the popular research directions of soft robot. In a static gripping system, excessive gripping force and large deformation are the main reasons for damage of the object during the gripping process. For achieving low-damage gripping to the object in static gripping system, we proposed a soft-rigid gripper actuated by a linear-extension soft pneumatic actuator in this study. The characteristic of the gripper under a no loading state was measured. When the pressure was >70 kPa, there was an approximately linear relation between the pressure and extension length of the soft actuator. To achieve gripping force and fingertip displacement control of the gripper without sensors integrated on the finger, we presented a non-contact sensing method for gripping state estimation. To analyze the gripping force and fingertip displacement, the relationship between the pressure and extension length of the soft actuator in loading state was compared with the relationship under a no-loading state. The experimental results showed that the relative error between the analytical gripping force and the measured gripping force of the gripper was ≤2.1%. The relative error between analytical fingertip displacement and theoretical fingertip displacement of the gripper was ≤7.4%. Furthermore, the low damage gripping to fragile and soft objects in static and dynamic gripping tests showed good performance of the gripper. Overall, the results indicated the potential application of the gripper in pick-and-place operations.

| S-EPMC7826651 | biostudies-literature

Adaptive control of a soft pneumatic actuator using experimental characterization data.

Project description:Fiber reinforced soft pneumatic actuators are hard to control due to their non-linear behavior and non-uniformity introduced by the fabrication process. Model-based controllers generally have difficulty compensating non-uniform and non-linear material behaviors, whereas model-free approaches are harder to interpret and tune intuitively. In this study, we present the design, fabrication, characterization, and control of a fiber reinforced soft pneumatic module with an outer diameter size of 12 mm. Specifically, we utilized the characterization data to adaptively control the soft pneumatic actuator. From the measured characterization data, we fitted mapping functions between the actuator input pressures and the actuator space angles. These maps were used to construct the feedforward control signal and tune the feedback controller adaptively depending on the actuator bending configuration. The performance of the proposed control approach is experimentally validated by comparing the measured 2D tip orientation against the reference trajectory. The adaptive controller was able to successfully follow the prescribed trajectory with a mean absolute error of 0.68° for the magnitude of the bending angle and 3.5° for the bending phase around the axial direction. The data-driven control method introduced in this paper may offer a solution to intuitively tune and control soft pneumatic actuators, compensating for their non-uniform and non-linear behavior.

| S-EPMC10050439 | biostudies-literature

A Wrist-Inspired Magneto-Pneumatic Hybrid-Driven Soft Actuator with Bidirectional Torsion.

Project description:A novel wrist-inspired soft actuator, which is driven by a magneto-pneumatic hybrid system and based on a Kresling origami unit, is proposed. The geometric model, kinematic analysis model, and quasistatic analysis model of the Kresling origami unit are presented. A key focus is on the formulation and investigation of the variation in rotation angle using the kinematic analysis model. A wrist-inspired soft actuator is designed, and its quasistatic characteristics are validated through various experiments. The paper proposes an innovative magneto-pneumatic hybrid actuation method, capable of achieving bidirectional torsion. This actuation method is experimentally validated, demonstrating the actuator's ability to maintain 3 steady states and its capability for bidirectional torsion deformation. Furthermore, the paper highlights the potential of the Kresling origami unit in designing soft actuators capable of achieving large rotation angles. For instance, an actuator with 6 sides (n = 6) is shown to achieve a rotation angle of 239.5°, and its rotation ratio exceeds 277°, about twice the largest one reported in other literature. The actuator offers a practical and effective solution for bidirectional torsion deformation in soft robotic applications.

| S-EPMC10981929 | biostudies-literature

Pneumatic actuator and flexible piezoelectric sensor for soft virtual reality glove system.

Project description:The desire to directly touch and experience virtual objects led to the development of a tactile feedback device. In this paper, a novel soft pneumatic actuator for providing tactile feedback is proposed and demonstrated. The suggested pneumatic actuator does not use an external air compressor but it is operated by internal air pressure generated by an electrostatic force. By using the actuator, we designed a glove to interact with virtual reality. The finger motions are detected by attached flexible piezoelectric sensors and transmitted to a virtual space through Bluetooth for interconnecting with a virtual hand. When the virtual finger touches the virtual object, the actuators are activated and give the tactile feedback to the real fingertip. The glove is made of silicone rubber material and integrated with the sensors and actuators such that users can wear them conveniently with light weight. This device was tested in a virtual chess board program, wherein the user picked up virtual chess pieces successfully.

| S-EPMC6639318 | biostudies-literature

Design and Fabrication of a Tunable Optofluidic Microlens Driven by an Encircled Thermo-Pneumatic Actuator.

Project description:This paper presents the design, simulation, fabrication, assembly, and testing of a miniature thermo-pneumatic optofluidic lens. The device comprises two separate zones for air heating and fluid pressing on a flexible membrane. A buried three-dimensional spiral microchannel connects the two zones without pumps or valves. The three-dimensional microfluidic structure is realized using a high-resolution three-dimensional printing technique. Multi-physics finite element simulations are introduced to assess the optimized air chamber design and the low-temperature gradient of the optical liquid. The tunable lens can be operated using a direct-current power supply. The temperature change with time is measured using an infrared thermal imager. The focal length ranges from 5 to 23 mm under a maximum voltage of 6 V. Because of the small size and robust actuation scheme, the device can potentially be integrated into miniature micro-optics devices for the fine-tuning of focal lengths.

| S-EPMC9415834 | biostudies-literature

Self-Sensing Pneumatic Compressing Actuator.

Project description:Using soft pneumatic actuator is a feasible solution in the complex unstructured environment, owing to their inherent compliance, light weight, and safety. However, due to the limitations of soft actuators' materials and structures, they fall short of motion accuracy and load capacity, or need large-size, bulky compressors. Meanwhile, in order to gain better control, it is essential for them to sense the environments as well. This leads to high-price sensors or a complicated manufacture technique. Here, a self-sensing vacuum soft actuation structure is proposed, aiming at acquiring good balance among precision, output force, and actuation pressure. The actuator mainly comprises a flexible membrane and a compression spring. When actuated, the flexible membrane outside the actuator compresses the internal spring skeleton, realizing large contractile motion in axial direction. Its built-in force sensor can indirectly measure the absolute displacement of the actuator with certain accuracy (about 5% F.S.). Besides, it does not require high actuation pressure to generate enough output force. The actuator is quite easy to manufacture with low cost, and there are a variety of materials to choose from. We established quasi-static models for actuators built of two different kinds of membrane materials, and tested their accuracy and output force. In addition, to break through the limits of vacuum actuation, a method of positive-negative pressure combined actuation has been proposed, which lowers the requirements for air source equipments, increases actuation pressure, and reduces potential safety threats at the same time. This kind of soft actuators can also effectively resist and detect impacts. The design of a two-finger dexterous robot hand and robot joint based on this soft actuator illustrates its broad application prospects in the fields of mobile robots, wearable devices, and human-robot interaction.

| S-EPMC7759537 | biostudies-literature

Controlling of Pneumatic Muscle Actuator Systems by Parallel Structure of Neural Network and Proportional Controllers (PNNP).

Project description:This article proposed a novel controller structure to track the non-linear behavior of the pneumatic muscle actuator (PMA), such as the elongation for the extensor actuator and bending for the bending PMA. The proposed controller consists of a neural network (NN) controller laid in parallel with the proportional controller (P). The parallel neural network proportional (PNNP) controllers provide a high level of precision and fast-tracking control system. The PNNP has been applied to control the length of the single extensor PMA and the bending angle of the single self-bending contraction actuator (SBCA) at different load values. For further validation, the PNNP has been applied to control a human-robot shared control system. The results show the efficiency of the proposed controller structure.

| S-EPMC7805742 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data