Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Designing a Robust Kelvin Probe Setup Optimized for Long-Term Surface Photovoltage Acquisition.

ABSTRACT: We introduce a robust low-budget Kelvin probe design that is optimized for the long-term acquisition of surface photovoltage (SPV) data, especially developed for highly resistive systems, which exhibit-in contrast to conventional semiconductors-very slow photoinduced charge relaxation processes in the range of hours and days. The device provides convenient optical access to the sample, as well as high mechanical and electrical stability due to off-resonance operation, showing a noise band as narrow as 1 mV. Furthermore, the acquisition of temperature-dependent SPV transients necessary for SPV-based deep-level transient spectroscopy becomes easily possible. The performance of the instrument is demonstrated by recording long-term SPV transients of the ultra-slowly relaxing model oxide strontium titanate (SrTiO 3 ) over 20 h.

SUBMITTER: Beyreuther E

PROVIDER: S-EPMC6264026 | biostudies-literature | 2018 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Designing a Robust Kelvin Probe Setup Optimized for Long-Term Surface Photovoltage Acquisition.

Beyreuther Elke E Grafström Stefan S Eng Lukas M LM

Sensors (Basel, Switzerland) 20181121 11

We introduce a robust low-budget Kelvin probe design that is optimized for the long-term acquisition of surface photovoltage (SPV) data, especially developed for highly resistive systems, which exhibit-in contrast to conventional semiconductors-very slow photoinduced charge relaxation processes in the range of hours and days. The device provides convenient optical access to the sample, as well as high mechanical and electrical stability due to off-resonance operation, showing a noise band as nar ...[more]

PMID: 30469394

Similar Datasets

Electric dipole of InN/InGaN quantum dots and holes and giant surface photovoltage directly measured by Kelvin probe force microscopy.

Project description:We directly measure the electric dipole of InN quantum dots (QDs) grown on In-rich InGaN layers by Kelvin probe force microscopy. This significantly advances the understanding of the superior catalytic performance of InN/InGaN QDs in ion- and biosensing and in photoelectrochemical hydrogen generation by water splitting and the understanding of the important third-generation InGaN semiconductor surface in general. The positive surface photovoltage (SPV) gives an outward QD dipole with dipole potential of the order of 150 mV, in agreement with previous calculations. After HCl-etching, to complement the determination of the electric dipole, a giant negative SPV of -2.4 V, significantly larger than the InGaN bandgap energy, is discovered. This giant SPV is assigned to a large inward electric dipole, associated with the appearance of holes, matching the original QD lateral size and density. Such surprising result points towards unique photovoltaic effects and photosensitivity.

| S-EPMC7125200 | biostudies-literature

Junction formation of Cu(3)BiS(3) investigated by Kelvin probe force microscopy and surface photovoltage measurements.

Project description:Recently, the compound semiconductor Cu(3)BiS(3) has been demonstrated to have a band gap of ~1.4 eV, well suited for photovoltaic energy harvesting. The preparation of polycrystalline thin films was successfully realized and now the junction formation to the n-type window needs to be developed. We present an investigation of the Cu(3)BiS(3) absorber layer and the junction formation with CdS, ZnS and In(2)S(3) buffer layers. Kelvin probe force microscopy shows the granular structure of the buffer layers with small grains of 20-100 nm, and a considerably smaller work-function distribution for In(2)S(3) compared to that of CdS and ZnS. For In(2)S(3) and CdS buffer layers the KPFM experiments indicate negatively charged Cu(3)BiS(3) grain boundaries resulting from the deposition of the buffer layer. Macroscopic measurements of the surface photovoltage at variable excitation wavelength indicate the influence of defect states below the band gap on charge separation and a surface-defect passivation by the In(2)S(3) buffer layer. Our findings indicate that Cu(3)BiS(3) may become an interesting absorber material for thin-film solar cells; however, for photovoltaic application the band bending at the charge-selective contact has to be increased.

| S-EPMC3323917 | biostudies-other

Direct observation of localized surface plasmon field enhancement by Kelvin probe force microscopy.

Project description:A surface plasmon (SP) is a fundamental excitation state that exists in metal nanostructures. Over the past several years, the performance of optoelectronic devices has been improved greatly via the SP enhancement effect. In our previous work, the responsivity of GaN ultraviolet detectors was increased by over 30 times when using Ag nanoparticles. However, the physics of the SP enhancement effect has not been established definitely because of the lack of experimental evidence. To reveal the physical origin of this enhancement, Kelvin probe force microscopy (KPFM) was used to observe the SP-induced surface potential reduction in the vicinity of Ag nanoparticles on a GaN epilayer. Under ultraviolet illumination, the localized field enhancement induced by the SP forces the photogenerated electrons to drift close to the Ag nanoparticles, leading to a reduction of the surface potential around the Ag nanoparticles on the GaN epilayer. For an isolated Ag nanoparticle with a diameter of ~200?nm, the distribution of the SP localized field is located within 60?nm of the boundary of the Ag nanoparticle. For a dimer of Ag nanoparticles, the localized field enhancement between the nanoparticles was the strongest. The results presented here provide direct experimental proof of the localized field enhancement. These results not only explain the high performance of GaN detectors observed with the use of Ag nanoparticles but also reveal the physical mechanism of SP enhancement in optoelectronic devices, which will help us further understand and improve the performance of SP-based optoelectronic devices in the future.

| S-EPMC6062315 | biostudies-literature

Full data acquisition in Kelvin Probe Force Microscopy: Mapping dynamic electric phenomena in real space.

Project description:Kelvin probe force microscopy (KPFM) has provided deep insights into the local electronic, ionic and electrochemical functionalities in a broad range of materials and devices. In classical KPFM, which utilizes heterodyne detection and closed loop bias feedback, the cantilever response is down-sampled to a single measurement of the contact potential difference (CPD) per pixel. This level of detail, however, is insufficient for materials and devices involving bias and time dependent electrochemical events; or at solid-liquid interfaces, where non-linear or lossy dielectrics are present. Here, we demonstrate direct recovery of the bias dependence of the electrostatic force at high temporal resolution using General acquisition Mode (G-Mode) KPFM. G-Mode KPFM utilizes high speed detection, compression, and storage of the raw cantilever deflection signal in its entirety at high sampling rates. We show how G-Mode KPFM can be used to capture nanoscale CPD and capacitance information with a temporal resolution much faster than the cantilever bandwidth, determined by the modulation frequency of the AC voltage. In this way, G-Mode KPFM offers a new paradigm to study dynamic electric phenomena in electroactive interfaces as well as a promising route to extend KPFM to the solid-liquid interface.

| S-EPMC4981877 | biostudies-other

Changes in plasma membrane surface potential of PC12 cells as measured by Kelvin probe force microscopy.

Project description:The plasma membrane of a cell not only works as a physical barrier but also mediates the signal relay between the extracellular milieu and the cell interior. Various stimulants may cause the redistribution of molecules, like lipids, proteins, and polysaccharides, on the plasma membrane and change the surface potential (?(s)). In this study, the ?(s)s of PC12 cell plasma membranes were measured by atomic force microscopy in Kelvin probe mode (KPFM). The skewness values of the ?(s)s distribution histogram were found to be mostly negative, and the incorporation of negatively charged phosphatidylserine shifted the average skewness values to positive. After being treated with H(2)O(2), dopamine, or Zn(2+), phosphatidylserine was found to be translocated to the membrane outer leaflet and the averaged skewness values were changed to positive values. These results demonstrated that KPFM can be used to monitor cell physiology status in response to various stimulants with high spatial resolution.

| S-EPMC3323603 | biostudies-literature

Imaging the surface potential at the steps on the rutile TiO<sub>2</sub>(110) surface by Kelvin probe force microscopy.

Project description:Although step structures have generally been considered to be active sites, their role on a TiO2 surface in catalytic reactions is poorly understood. In this study, we measured the contact potential difference around the steps on a rutile TiO2(110)-(1 × 1) surface with O2 exposure using Kelvin probe force microscopy. A drop in contact potential difference was observed at the steps, indicating that the work function locally decreased. Moreover, for the first time, we found that the drop in contact potential difference at a <1-11> step was larger than that at a <001> step. We propose a model for interpreting the surface potential at the steps by combining the upward dipole moment, in analogy to the Smoluchowski effect, and the local dipole moment of surface atoms. This local change in surface potential provides insight into the important role of the steps in the catalytic reaction.

| S-EPMC6604711 | biostudies-literature

Kelvin probe force microscopy of the nanoscale electrical surface potential barrier of metal/semiconductor interfaces in ambient atmosphere.

Project description:This study deals with the preparation and characterization of metallic nanoinclusions on the surface of semiconducting Bi2Se3 that could be used for an enhancement of the efficiency of thermoelectric materials. We used Au forming a 1D alloy through diffusion (point nanoinclusion) and Mo forming thermodynamically stable layered MoSe2 nanosheets through the reaction with the Bi2Se3. The Schottky barrier formed by the 1D and 2D nanoinclusions was characterized by means of atomic force microscopy (AFM). We used Kelvin probe force microscopy (KPFM) in ambient atmosphere at the nanoscale and compared the results to those of ultraviolet photoelectron spectroscopy (UPS) in UHV at the macroscale. The existence of the Schottky barrier was demonstrated at +120 meV for the Mo layer and -80 meV for the Au layer reflecting the formation of MoSe2 and Au/Bi2Se3 alloy, respectively. The results of both methods (KPFM and UPS) were in good agreement. We revealed that long-time exposure (tens of seconds) to the electrical field leads to deep oxidation and the formation of perturbations greater than 1 µm in height, which hinder the I-V measurements.

| S-EPMC6664417 | biostudies-literature

Emergent photovoltage on SmB6 surface upon bulk-gap evolution revealed by pump-and-probe photoemission spectroscopy.

Project description:Recent studies suggest that an exemplary Kondo insulator SmB6 belongs to a new class of topological insulators (TIs), in which non-trivial spin-polarized metallic states emerge on surface upon the formation of Kondo hybridization gap in the bulk. Remarkably, the bulk resistivity reaches more than 20 ? cm at 4?K, making SmB6 a candidate for a so-called bulk-insulating TI. We here investigate optical-pulse responses of SmB6 by pump-and-probe photoemission spectroscopy. Surface photovoltage effect is observed below ~90?K. This indicates that an optically-active band bending region develops beneath the novel metallic surface upon the bulk-gap evolution. The photovoltaic effect persists for >200?µs, which is long enough to be detected by electronics devices, and could be utilized for optical gating of the novel metallic surface.

| S-EPMC4313084 | biostudies-other

High resolution atomic force and Kelvin probe force microscopy image data of InAs(001) surface using frequency modulation method.

Project description:This article provides data on the scanning tunnelling microscopy (STM), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM) images of InAs(001) surface. Using the frequency-modulation (FM) method in AFM and KPFM, atomic resolution topography and contact potential difference (CPD) images of InAs(001) surface were obtained. The InAs(001) surface reconstruction images observed by STM and AFM are compared. The effect of AFM tip condition and tip-sample distance to AFM and KPFM imaging is verified by measuring frequency shift vs. tip-sample distance spectroscopy. This data article is related to the article entitled, "Kelvin prove force microscopy and its application" (Melitz et al., 2011) [1].

| S-EPMC7005429 | biostudies-literature

Kelvin probe force microscopy in liquid using electrochemical force microscopy.

Project description:Conventional closed loop-Kelvin probe force microscopy (KPFM) has emerged as a powerful technique for probing electric and transport phenomena at the solid-gas interface. The extension of KPFM capabilities to probe electrostatic and electrochemical phenomena at the solid-liquid interface is of interest for a broad range of applications from energy storage to biological systems. However, the operation of KPFM implicitly relies on the presence of a linear lossless dielectric in the probe-sample gap, a condition which is violated for ionically-active liquids (e.g., when diffuse charge dynamics are present). Here, electrostatic and electrochemical measurements are demonstrated in ionically-active (polar isopropanol, milli-Q water and aqueous NaCl) and ionically-inactive (non-polar decane) liquids by electrochemical force microscopy (EcFM), a multidimensional (i.e., bias- and time-resolved) spectroscopy method. In the absence of mobile charges (ambient and non-polar liquids), KPFM and EcFM are both feasible, yielding comparable contact potential difference (CPD) values. In ionically-active liquids, KPFM is not possible and EcFM can be used to measure the dynamic CPD and a rich spectrum of information pertaining to charge screening, ion diffusion, and electrochemical processes (e.g., Faradaic reactions). EcFM measurements conducted in isopropanol and milli-Q water over Au and highly ordered pyrolytic graphite electrodes demonstrate both sample- and solvent-dependent features. Finally, the feasibility of using EcFM as a local force-based mapping technique of material-dependent electrostatic and electrochemical response is investigated. The resultant high dimensional dataset is visualized using a purely statistical approach that does not require a priori physical models, allowing for qualitative mapping of electrostatic and electrochemical material properties at the solid-liquid interface.

| S-EPMC4311590 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data