Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Water assisted growth of C₆₀ rods and tubes by liquid-liquid interfacial precipitation method.

ABSTRACT: C₆₀ nanorods with hexagonal cross sections are grown using a static liquid-liquid interfacial precipitation method in a system of C₆₀/m-dichlorobenzene solution and ethanol. Adding water to the ethanol phase leads instead to C₆₀ tubes where both length and diameter of the C₆₀ tubes can be controlled by the water content in the ethanol. Based on our observations we find that the diameter of the rods/tubes strongly depends on the nucleation step. We propose a liquid-liquid interface growth model of C₆₀ rods and tubes based on the diffusion rate of the good C₆₀ containing solvent into the poor solvent as well as on the size of the crystal seeds formed at the interface between the two solvents. The grown rods and tubes exhibit a hexagonal solvate crystal structure with m-dichlorobenzene solvent molecules incorporated into the crystal structure, independent of the water content. An annealing step at 200 °C at a pressure < 1 kPa transforms the grown structures into a solvent-free face centered cubic structure. Both the hexagonal and the face centered cubic structures are very stable and neither morphology nor structure shows any signs of degradation after three months of storage.

SUBMITTER: Barzegar HR

PROVIDER: S-EPMC6268927 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Interfacial Water Structure of Binary Liquid Mixtures Reflects Nonideal Behavior.

Project description:The evaporation of molecules from water-organic solute binary mixtures is key for both atmospheric and industrial processes such as aerosol formation and distillation. Deviations from ideal evaporation energetics can be assigned to intermolecular interactions in solution, yet evaporation occurs from the interface, and the poorly understood interfacial, rather than the bulk, structure of binary mixtures affects evaporation kinetics. Here we determine the interfacial structure of nonideal binary mixtures of water with methanol, ethanol, and formic acid, by combining surface-specific vibrational spectroscopy with molecular dynamics simulations. We find that the free, dangling OH groups at the interfaces of these differently behaving nonideal mixtures are essentially indistinguishable. In contrast, the ordering of hydrogen-bonded interfacial water molecules differs substantially at these three interfaces. Specifically, the interfacial water molecules become more disordered (ordered) in mixtures with methanol and ethanol (formic acid), showing higher (lower) vapor pressure than that predicted by Raoult's law.

| S-EPMC8474108 | biostudies-literature

The interfacial structure of water droplets in a hydrophobic liquid.

Project description:Nanoscopic and microscopic water droplets and ice crystals embedded in liquid hydrophobic surroundings are key components of aerosols, rocks, oil fields and the human body. The chemical properties of such droplets critically depend on the interfacial structure of the water droplet. Here we report the surface structure of 200 nm-sized water droplets in mixtures of hydrophobic oils and surfactants as obtained from vibrational sum frequency scattering measurements. The interface of a water droplet shows significantly stronger hydrogen bonds than the air/water or hexane/water interface and previously reported planar liquid hydrophobic/water interfaces at room temperature. The observed spectral difference is similar to that of a planar air/water surface at a temperature that is ∼50 K lower. Supercooling the droplets to 263 K does not change the surface structure. Below the homogeneous ice nucleation temperature, a single vibrational mode is present with a similar mean hydrogen-bond strength as for a planar ice/air interface.

| S-EPMC5458086 | biostudies-literature

Water Mobility in the Interfacial Liquid Layer of Ice/Clay Nanocomposites.

Project description:At solid/ice interfaces, a premelting layer is formed at temperatures below the melting point of bulk water. However, the structural and dynamic properties within the premelting layer have been a topic of intense debate. Herein, we determined the translational diffusion coefficient Dt of water in ice/clay nanocomposites serving as model systems for permafrost by quasi-elastic neutron scattering. Below the bulk melting point, a rapid decrease of Dt is found for charged hydrophilic vermiculite, uncharged hydrophilic kaolin, and more hydrophobic talc, reaching plateau values below -4 °C. At this temperature, Dt in the premelting layer is reduced up to a factor of two compared to supercooled bulk water. Adjacent to charged vermiculite the lowest water mobility was observed, followed by kaolin and the more hydrophobic talc. Results are explained by the intermolecular water interactions with different clay surfaces and interfacial segregation of the low-density liquid water (LDL) component.

| S-EPMC8048683 | biostudies-literature

Air-liquid interfacial biofilm vs planktonic S. cerevisiae cells

Project description:Goal was to identify yeast genes whose expression changed as a function of the shift from growth in bulk culture to growth in an air-liquid interfacial biofilm.

2009-11-25 | GSE19156 | GEO

Magnetic nanoparticles assisted dispersive liquid-liquid microextraction of chloramphenicol in water samples.

Project description:This work describes the development of a new methodology based on magnetic nanoparticles assisted dispersive liquid-liquid microextraction (DLLME-MNPs) for preconcentration and extraction of chloramphenicol (CAP) antibiotic residues in water. The approach is based on the use of decanoic acid as the extraction solvent followed by the application of MNPs to magnetically retrieve the extraction solvent containing the extracted CAP. The coated MNPs were then desorbed with methanol, and the clean extract was analysed using ultraviolet-visible spectrophotometry. Several important parameters, such as the amount of decanoic acid, extraction time, stirring rate, amount of MNPs, type of desorption solvent, salt addition and sample pH, were evaluated and optimized. Optimum parameters were as follows: amount of decanoic acid: 200 mg; extraction time: 10 min; stirring rate: 800 rpm; amount of MNPs: 60 mg; desorption solvent: methanol; salt: 10%; and sample pH, 8. Under the optimum conditions, the method demonstrated acceptable linearity (R 2 = 0.9933) over a concentration range of 50-1000 µg l-1. Limit of detection and limit of quantification were 16.5 and 50.0 µg l-1, respectively. Good analyte recovery (91-92.7%) and acceptable precision with good relative standard deviations (0.45-6.29%, n = 3) were obtained. The method was successfully applied to tap water and lake water samples. The proposed method is rapid, simple, reliable and environmentally friendly for the detection of CAP.

| S-EPMC7211875 | biostudies-literature

Interfacial Vibrational Dynamics of Ice I<sub>h</sub> and Liquid Water.

Project description:Insights into energy flow dynamics at ice surfaces are essential for understanding chemical dynamics relevant to atmospheric and geographical sciences. Here, employing ultrafast surface-specific spectroscopy, we report the interfacial vibrational dynamics of ice Ih. A comparison to liquid water surfaces reveals accelerated vibrational energy relaxation and dissipation at the ice surface for hydrogen-bonded OH groups. In contrast, free-OH groups sticking into the vapor phase exhibit substantially slower vibrational dynamics on ice. The acceleration and deceleration of vibrational dynamics of these different OH groups at the ice surface are attributed to enhanced intermolecular coupling and reduced rotational mobility, respectively. Our results highlight the unique properties of free-OH groups on ice, putatively linked to the high catalytic activities of ice surfaces.

| S-EPMC7467663 | biostudies-literature

Response surface optimization of a vortex-assisted dispersive liquid-liquid microextraction method for highly sensitive determination of repaglinide in environmental water by HPLC/UV.

Project description:A vortex-assisted dispersive liquid-liquid microextraction (DLLME) method, mated to chemometrics and combined with HPLC/UV detection was optimized and validated for enrichment and determination of repaglinide in environmental samples using nateglinide as an internal standard (IS). A phosphate buffer (10 mM, pH 2.5): acetonitrile (45:55, v/v) was used as a mobile phase with a flow rate of 1 mL/min in an isocratic elution mode. Chemometrics-assisted optimization was performed using a quadratic integrated D-optimal design. The developed model assessed the statistical significance of the independent variables and their interactions to attain the optimum conditions revealing that extractant type, extractant volume and pH are the most influential factors. Optimization of the extraction procedures was performed with the aid of Design Expert 8® software, which suggested 58 different experiments. The optimal conditions were 30 µL of 1-octanol as extractant, 100 µL of acetonitrile as a disperser at pH 8. Under the optimized conditions, the method showed linearity over the range of 1-100 ng/mL with a limit of detection of 0.4 ng/mL. The accuracy, the intra- and inter-day precision were assessed, the %recoveries were found to be between 98.48 and 100.81% with %RSD lower than 1.3. Using chemometrics in method optimization helped achieve the maximum possible enrichment with the least effort, time, and reagents while considering all possible interactions between variables.

| S-EPMC9107645 | biostudies-literature

The high efficient catalytic properties for thermal decomposition of ammonium perchlorate using mesoporous ZnCo2O4 rods synthesized by oxalate co-precipitation method.

Project description:Mesoporous ZnCo2O4 rods have been successfully prepared via oxalate co-precipitation method without any template. The nano-sized spinel crystallites connected together to form mesoporous structure by annealing homogeneous complex oxalates precursor at a low rate of heating. It is found that the low anneal rate plays an important role for the formation of mesoporous ZnCo2O4 rods. The effects of the heat temperature on the phase, morphology and catalytic properties of the products were studied. The XRD, SEM TEM, and N2 absorption/desorption have been done to obtain compositional and morphological information as well as BET surface area of the as-prepared sample. Catalytic activities of mesoporous ZnCo2O4 rods toward the thermal decomposition of ammonium perchlorate (AP) were investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG) techniques. The results show that the addition of ZnCo2O4 rods to AP dramatically reduces the decomposition temperature. The ZnCo2O4 rods annealed at 250?°C possesses much larger specific area and exhibits excellent catalytic activity (decrease the high decomposition temperature of AP by 162.2?°C). The obtained mesoporous ZnCo2O4 rods are promising as excellent catalyst for the thermal decomposition of AP.

| S-EPMC5953971 | biostudies-literature

Void-Assisted Ion-Paired Proton Transfer at Water-Ionic Liquid Interfaces.

Project description:At the water-trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P14,6,6,6][FAP]) ionic liquid interface, the unusual electrochemical transfer behavior of protons (H(+)) and deuterium ions (D(+)) was identified. Alkali metal cations (such as Li(+), Na(+), K(+)) did not undergo this transfer. H(+)/D(+) transfers were assisted by the hydrophobic counter anion of the ionic liquid, [FAP](-), resulting in the formation of a mixed capacitive layer from the filling of the latent voids within the anisotropic ionic liquid structure. This phenomenon could impact areas such as proton-coupled electron transfers, fuel cells, and hydrogen storage where ionic liquids are used as aprotic solvents.

| S-EPMC4678505 | biostudies-literature

Characterization of the Ultralow Interfacial Tension in Liquid-Liquid Phase Separated Polyelectrolyte Complex Coacervates by the Deformed Drop Retraction Method.

Project description:Dilute droplets form upon changing the temperature of a phase separated polyelectrolyte complex coacervate. This provides an in situ approach to measure the interfacial tension between supernatant (dilute droplet) and dense coacervate by the deformed drop retraction (DDR) method. The aqueous coacervate, formed via a model 1:1 by charge stoichiometric polyelectrolyte blend, exhibits ultralow interfacial tension with the coexisting phase. DDR finds the interfacial tension scales as ? = ? 0(1 - C s/C s,c) ? , with ? = 1.5 ± 0.1, ? 0 = 204 ± 36 ?N/m, and C s,c = 1.977 mol/L. The value of ? independently validates the classical exponent of 3/2. The scaling holds between C s/C s,c of 0.75 to 0.94, the closest measurements to date near the critical salt concentration (C s,c). The temperature dependence of the interfacial tension is consistent with observed lower critical solution phase behavior and classical scaling. A detailed account of the DDR method and validation of assumptions are demonstrated.

| S-EPMC7340275 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data