Pressure generated at the instant of impact between a liquid droplet and solid surface.
Ontology highlight
ABSTRACT:
SUBMITTER: Tatekura Y
PROVIDER: S-EPMC6304138 | biostudies-literature | 2018 Dec
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In industrial applications involving spray-cooling, combustion, and so on, prediction of the maximum spreading diameter of a droplet impinging on a solid surface permits a quantitative estimation of heat removal and energy consumption. However, although there are many experimental studies regarding droplet impingement behaviour, theoretical models have an applicability limit for predicting the maximum spreading diameter. In the present study, we have developed an analytical model for droplet impingement based on energy conservation that considers adhesion energy in both horizontal and vertical directions at the contact line. The theory is validated by our experiment and existing experimental data possessing a wide range of Weber numbers. We demonstrate that our model can predict β m (i.e., the maximum spreading diameter normalised in terms of initial droplet diameter) for various Newtonian liquids ranging from micro- to millimetre-sized droplets on different solid surfaces and can determine the transition between capillary and viscous regimes. Furthermore, theoretical relations for scaling laws observed by many researchers are derived.
| S-EPMC5443818 | biostudies-literature
Project description:Droplet libraries consisting of many reagents encapsulated in separate droplets are necessary for applications of microfluidics, including combinatorial chemical synthesis, DNA-encoded libraries, and massively multiplexed PCR. However, existing approaches for generating them are laborious and impractical. Here, we describe an automated approach using a commercial array spotter. The approach can controllably emulsify hundreds of different reagents in a fraction of the time of manual operation of a microfluidic device, and without any user intervention. We demonstrate that the droplets produced by the spotter are similarly uniform to those produced by microfluidics and automate the generation of a ~ 2 mL emulsion containing 192 different reagents in ~ 4 h. The ease with which it can generate high diversity droplet libraries should make combinatorial applications more feasible in droplet microfluidics. Moreover, the instrument serves as an automated droplet generator, allowing execution of droplet reactions without microfluidic expertise.
| S-EPMC7902812 | biostudies-literature
Project description:Liquid-liquid transition (LLT) in single-component liquids is one of the most mysterious phenomena in condensed matter. So far, this problem has attracted attention mainly from the fundamental viewpoint. We report the first experimental study on an impact of surface nanostructuring on LLT by using a surface treatment called rubbing, which is the key technology for the production of liquid crystal displays. We find that this rubbing treatment has a significant impact on the kinetics of LLT of an isotropic molecular liquid, triphenyl phosphite. For a liquid confined between rubbed surfaces, surface-induced barrierless formation of the liquid II phase is observed even in a metastable state, where there should be a barrier for nucleation of the liquid II phase in bulk. Thus, surface rubbing of substrates not only changes the ordering behavior but also significantly accelerates the kinetics. This spatiotemporal pattern modulation of LLT can be explained by a wedge-filling transition and the resulting drastic reduction of the nucleation barrier. However, this effect completely disappears in the unstable (spinodal) regime, indicating the absence of the activation barrier even for bulk LLT. This confirms the presence of nucleation-growth- and spinodal decomposition-type LLT, supporting the conclusion that LLT is truly a first-order transition with criticality. Our finding also opens up a new way to control the kinetics of LLT of a liquid confined in a solid cell by structuring its surface on a mesoscopic length scale, which may contribute to making LLT useful for microfluidics and other industrial applications.
| S-EPMC5315451 | biostudies-literature
Project description:When a solid object impacts on the surface of a liquid, extremely high pressure develops at the site of contact. Von Karman's study of this classical physics problem showed that the pressure on the bottom surface of the impacting body approaches infinity for flat impacts. Yet, in contrast to the high pressures found from experience and in previous studies, we show that a flat-bottomed cylinder impacting a pool of liquid can decrease the local pressure sufficiently to cavitate the liquid. Cavitation occurs because the liquid is slightly compressible and impact creates large pressure waves that reflect from the free surface to form negative pressure regions. We find that an impact velocity as low as ~3 m/s suffices to cavitate the liquid and propose a new cavitation number to predict cavitation onset in low-speed solid-liquid impact-scenarios. These findings imply that localized cavitation could occur in impacts such as boat slamming, cliff jumping, and ocean landing of spacecraft.
| S-EPMC8668927 | biostudies-literature
Project description:Real-time monitoring of rainwater is a critical issue in the development of autonomous vehicles and smart homes, while the corresponding sensors play a pivotal role in ensuring their sensitivity. Here, we study a self-powered intelligent water droplet monitoring sensor based on a solid-liquid triboelectric nanogenerator (SL-TENG). The sensor comprises a SL-TENG, a signal acquisition module, a central processing unit (CPU), and a wireless transmission module, facilitating the real-time monitoring of water droplet signals. It is worth noting that the SL-TENG has self-powering characteristics and can convert the kinetic energy of water droplets into electrical energy. The excellent output performance, with open-circuit voltage of 9 V and short-circuit current of 2 μA without any treatment of the SL-TENG, can provide an effective solution to the problem that traditional sensor need battery replacement. In addition, the SL-TENG can generate stable amplitude electrical signals through water droplets, exemplified by the absence of decay in a short-circuit current within 7 days. More importantly, the sensor is equipped with intelligent analytical capabilities, allowing it to assess rainfall based on variables such as amplitude and frequency. Due to its excellent stability and intelligent analysis, this sensor can be used for roof rainwater monitoring, intravenous administration monitoring, and especially in automobile automatic wipers and other fields.
| S-EPMC10974355 | biostudies-literature
Project description:We show that a drop of liquid a few hundred microns in diameter placed under a solid, elastic, thin film (?10 ?m thick) causes it to bulge by tens of microns. The deformed shape is governed by equilibrium of tensions exerted by the various interfaces and the solid film, a form of Neumann's triangle. Unlike Young's equation, which specifies the contact angles at the junction of two fluids and a (rigid) solid, and is fundamentally underdetermined, both tensions in the solid film can be determined here if the liquid-vapor surface tension is known independently. Tensions in the solid film have a contribution from elastic stretch and a constant residual component. The residual component, extracted by extrapolation to films of vanishing thickness and supported by analysis of the elastic deformation, is interpreted as the solid-fluid surface tension, demonstrating that compliant thin-film structures can be used to measure solid surface tensions.
| S-EPMC3696820 | biostudies-other
Project description:During mitosis, adherent cells round up, by increasing the tension of the contractile actomyosin cortex while increasing the internal hydrostatic pressure. In the simple scenario of a liquid cell interior, the surface tension is related to the local curvature and the hydrostatic pressure difference by Laplace's law. However, verification of this scenario for cells requires accurate measurements of cell shape. Here, we use wedged micro-cantilevers to uniaxially confine single cells and determine confinement forces while concurrently determining cell shape using confocal microscopy. We fit experimentally measured confined cell shapes to shapes obeying Laplace's law with uniform surface tension and find quantitative agreement. Geometrical parameters derived from fitting the cell shape, and the measured force were used to calculate hydrostatic pressure excess and surface tension of cells. We find that HeLa cells increase their internal hydrostatic pressure excess and surface tension from ? 40 Pa and 0.2 mNm(-1) during interphase to ? 400 Pa and 1.6 mNm(-1) during metaphase. The method introduced provides a means to determine internal pressure excess and surface tension of rounded cells accurately and with minimal cellular perturbation, and should be applicable to characterize the mechanical properties of various cellular systems.
| S-EPMC4148660 | biostudies-literature
Project description:A water droplet behavior on the liquid n-octadecane film is investigated. The coating of hydrophobic surface by N-octadecane film provides exchange of wetting state on the surface. The polycarbonate surface is crystallized and the functionalized silica particles are placed on the resulting surface prior to thin film coating of n-octadecane. A high-speed camera is used to monitor dynamic characteristics of the droplet on the inclined film. The findings reveal that deposition of thin n-octadecane film on hydrophobic surface results in reversibly exchange of the wetting state at the surface, which remains hydrophobic when n-octadecane film is in solid phase while it becomes hydrophilic when n-octadecane film liquefies. Droplet transition velocity predicted agrees well with the experimental data. Sliding mode of the water droplet governs droplet transition on the liquid surface. Droplet pinning force, due to interfacial tension, dominates over the other retention forces including drag and shear.
| S-EPMC6180037 | biostudies-literature
Project description:The impact of a liquid droplet onto a solid surface is a phenomenon present in a wide range of natural processes and technological applications. In this study, we focus on impact conditions characterised by ultra high velocities (up to 500 m/s), to investigate-for the first time-how the impact dynamics change when the compressibility of the liquid in the droplet is no longer negligible. A water droplet impacting a dry substrate at four different velocities, from 50 to 500 m/s, is simulated. Such conditions are particularly relevant to aviation as well as industrial gas turbine engine risk management. Thus, numerical investigations as the one we present here provide a powerful tool to analyse the process. We find that increasing the impact velocity changes the flow field within and outside the droplet the moment that the compressibility can no longer be neglected, with the rise of pressure fronts in both regions. Increasing the impact velocity, the compressibility affects also the lamella formed and changes its ejection velocity observed over time (and thus the wetting behaviour) when the region shift from incompressible to compressible. Moreover, it is found that the maximum pressure observed at the wall during the impact is located at the corner of the impact, where the lamella is ejected, not in the centre, and it is influenced by the initial velocity. To predict the maximum pressure experienced by the surface during the high velocity impact, we propose a correlation based on the initial Weber and Reynolds number of the droplet. The complexity and the scales of the dynamics involved in the ultra-high velocity impact is limiting the experimental and analytical studies. To the best of our knowledge there are no experimental data currently available at such conditions. In this study, through numerical simulations, new insights about the impact dynamics at such conditions are provided.
| S-EPMC9076664 | biostudies-literature
Project description:The effects that solid-liquid interfaces exert on the aggregation of proteins and peptides are of high relevance for various fields of basic and applied research, ranging from molecular biology and biomedicine to nanotechnology. While the influence of surface chemistry has received a lot of attention in this context, the role of surface topography has mostly been neglected so far. In this work, therefore, we investigate the aggregation of the type 2 diabetes-associated peptide hormone hIAPP in contact with flat and nanopatterned silicon oxide surfaces. The nanopatterned surfaces are produced by ion beam irradiation, resulting in well-defined anisotropic ripple patterns with heights and periodicities of about 1.5 and 30 nm, respectively. Using time-lapse atomic force microscopy, the morphology of the hIAPP aggregates is characterized quantitatively. Aggregation results in both amorphous aggregates and amyloid fibrils, with the presence of the nanopatterns leading to retarded fibrillization and stronger amorphous aggregation. This is attributed to structural differences in the amorphous aggregates formed at the nanopatterned surface, which result in a lower propensity for nucleating amyloid fibrillization. Our results demonstrate that nanoscale surface topography may modulate peptide and protein aggregation pathways in complex and intricate ways.
| S-EPMC8152259 | biostudies-literature