Dataset Information

Evaluation of Food Fineness by the Bionic Tongue Distributed Mechanical Testing Device.

ABSTRACT: In this study, to obtain a texture perception that is closer to the human sense, we designed eight bionic tongue indenters based on the law of the physiology of mandibular movements and tongue movements features, set up a bionic tongue distributed mechanical testing device, performed in vitro simulations to obtain the distributed mechanical information over the tongue surface, and preliminarily constructed a food fineness perception evaluation model. By capturing a large number of tongue movements during chewing, we analyzed and simulated four representative tongue movement states including the tiled state, sunken state, raised state, and overturned state of the tongue. By analyzing curvature parameters and the Gauss curvature of the tongue surface, we selected the regional circle of interest. With that, eight bionic tongue indenters with different curvatures over the tongue surface were designed. Together with an arrayed film pressure sensor, we set up a bionic tongue distributed mechanical testing device, which was used to do contact pressure experiments on three kinds of cookies-WZ Cookie, ZL Cookie and JSL Cookie-with different fineness texture characteristics. Based on the distributed mechanical information perceived by the surface of the bionic tongue indenter, we established a food fineness perception evaluation model by defining three indicators, including gradient, stress change rate and areal density. The correlation between the sensory assessment and model result was analyzed. The results showed that the average values of correlation coefficients among the three kinds of food with the eight bionic tongue indenters reached 0.887, 0.865, and 0.870, respectively, that is, a significant correlation was achieved. The results illustrate that the food fineness perception evaluation model is effective, and the bionic tongue distributed mechanical testing device has a good practical significance for obtaining food texture mouthfeel information.

SUBMITTER: Liu J

PROVIDER: S-EPMC6308582 | biostudies-literature | 2018 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Evaluation of Food Fineness by the Bionic Tongue Distributed Mechanical Testing Device.

Liu Jingjing J Cui Ying Y Chen Yizhou Y Wang Wei W Tang Yuanyuan Y Men Hong H

Sensors (Basel, Switzerland) 20181203 12

In this study, to obtain a texture perception that is closer to the human sense, we designed eight bionic tongue indenters based on the law of the physiology of mandibular movements and tongue movements features, set up a bionic tongue distributed mechanical testing device, performed in vitro simulations to obtain the distributed mechanical information over the tongue surface, and preliminarily constructed a food fineness perception evaluation model. By capturing a large number of tongue movemen ...[more]

PMID: 30513979

Similar Datasets

Project description:Introduction: Man-machine interfacing remains the main challenge for accurate and reliable control of bionic prostheses. Implantable electrodes in nerves and muscles may overcome some of the limitations by significantly increasing the interface's reliability and bandwidth. Before human application, experimental preclinical testing is essential to assess chronic in-vivo biocompatibility and functionality. Here, we analyze available animal models, their costs and ethical challenges in special regards to simulating a potentially life-long application in a short period of time and in non-biped animals. Methods: We performed a literature analysis following the PRISMA guidelines including all animal models used to record neural or muscular activity via implantable electrodes, evaluating animal models, group size, duration, origin of publication as well as type of interface. Furthermore, behavioral, ethical, and economic considerations of these models were analyzed. Additionally, we discuss experience and surgical approaches with rat, sheep, and primate models and an approach for international standardized testing. Results: Overall, 343 studies matched the search terms, dominantly originating from the US (55%) and Europe (34%), using mainly small animal models (rat: 40%). Electrode placement was dominantly neural (77%) compared to muscular (23%). Large animal models had a mean duration of 135 ± 87.2 days, with a mean of 5.3 ± 3.4 animals per trial. Small animal models had a mean duration of 85 ± 11.2 days, with a mean of 12.4 ± 1.7 animals. Discussion: Only 37% animal models were by definition chronic tests (>3 months) and thus potentially provide information on long-term performance. Costs for large animals were up to 45 times higher than small animals. However, costs are relatively small compared to complication costs in human long-term applications. Overall, we believe a combination of small animals for preliminary primary electrode testing and large animals to investigate long-term biocompatibility, impedance, and tissue regeneration parameters provides sufficient data to ensure long-term human applications.

Project description:Resilience, defined as the ability of a system to adapt in the presence of a disruptive event, has been of great interest with food systems for some time now. The goal of this research was to build understanding about resilient food systems that will withstand and recover from disruptions in a way that ensures a sufficient supply of food for all. In large, developed countries such as the USA and Canada, the food supply chain relies on a complex web of interconnected systems, such as water and energy systems, and food production and distribution are still very labor-intensive. Thanks to economies of scale and effective use of limited resources, potential cost savings support a push towards a more centralized system. However, distributed systems tend to be more resilient. Although distributed production systems may not be economically justifiable than centralized ones, they may provide a more resilient alternative. This study focused on the supply-side aspects of the food system and the food system's water, energy, and workforce disruptions to be considered for the resilience assessment for the USA, with an example for the state of Texas. After the degree of centralization (DoC) was calculated, the resilience of a food system was measured. Next, the relationship between labor intensity and production of six major food groups was formulated. The example for Texas showed that the decentralization of food systems will improve their resilience in responding to energy and water disruptions. A 40 percent reduction in water supply could decrease the food system performance by 28%. A negative correlation was found between the resilience and DoC for energy disruption scenarios. A 40 percent reduction in energy supply could decrease the food system performance by 34%. In contrast, achieving a more resilient food system in responding to labor shortage supports a push towards a more centralized system the decentralization of food systems can in fact, improve their resilience in responding to disruptions in the energy and water inputs. In contrast, achieving a more resilient food system in responding to labor shortage supports a push towards a more centralized system.Supplementary informationThe online version contains supplementary material available at 10.1007/s12571-022-01321-9.

Project description:Mechanical circulatory support (MCS) devices provide both short and long term hemodynamic support for advanced heart failure patients. Unfortunately these devices remain plagued by thromboembolic complications associated with chronic platelet activation--mandating complex, lifelong anticoagulation therapy. To address the unmet need for enhancing the thromboresistance of these devices to extend their long term use, we developed a universal predictive methodology entitled Device Thrombogenicity Emulation (DTE) that facilitates optimizing the thrombogenic performance of any MCS device--ideally to a level that may obviate the need for mandatory anticoagulation. DTE combines in silico numerical simulations with in vitro measurements by correlating device hemodynamics with platelet activity coagulation markers--before and after iterative design modifications aimed at achieving optimized thrombogenic performance. DTE proof-of-concept is demonstrated by comparing two rotary Left Ventricular Assist Devices (LVADs) (DeBakey vs HeartAssist 5, Micromed Houston, TX), the latter a version of the former following optimization of geometrical features implicated in device thrombogenicity. Cumulative stresses that may drive platelets beyond their activation threshold were calculated along multiple flow trajectories and collapsed into probability density functions (PDFs) representing the device 'thrombogenic footprint', indicating significantly reduced thrombogenicity for the optimized design. Platelet activity measurements performed in the actual pump prototypes operating under clinical conditions in circulation flow loops--before and after the optimization with the DTE methodology, show an order of magnitude lower platelet activity rate for the optimized device. The robust capability of this predictive technology--demonstrated here for attaining safe and cost-effective pre-clinical MCS thrombo-optimization--indicates its potential for reducing device thrombogenicity to a level that may significantly limit the extent of concomitant antithrombotic pharmacotherapy needed for safe clinical device use.

Dataset Information

Evaluation of Food Fineness by the Bionic Tongue Distributed Mechanical Testing Device.

Publications

Evaluation of Food Fineness by the Bionic Tongue Distributed Mechanical Testing Device.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets